Bluetooth Connection Establishment Process - PowerPoint PPT Presentation

1 / 16
About This Presentation
Title:

Bluetooth Connection Establishment Process

Description:

Study the environment of Opnet and its functionality and capabilities. ... Each red state represent 'real' state in the BT. Switching states by interrupts. ... – PowerPoint PPT presentation

Number of Views:86
Avg rating:3.0/5.0
Slides: 17
Provided by: Kol55
Category:

less

Transcript and Presenter's Notes

Title: Bluetooth Connection Establishment Process


1
Bluetooth Connection Establishment Process
  • Semester Presentation

Miki Asa Gur Hildesheim Instructor Ronen Kofman
2
Project Goals
  • Study the environment of Opnet and its
    functionality and capabilities.
  • Study the bluetooth principles.
  • Build the simulation environment.
  • Prove credibility of the simulation.
  • check suggested algorithms.

3
Connection Establishment
  • Inquiry
  • The master is looking for a slave
  • The slave provides the master information about
    his clock and ID (BD_ADDR)

4
Connection Establishment (cont)
  • Page
  • The slave listens on certain frequencies (hop
    sequence) based on his ID.
  • The master is looking for the slave according to
    the information achieved in the Inquiry
    procedure.
  • How?

5
Opnet Modeler
  • A convenient tool for network modeling
  • Subnet
  • The units in the net.
  • Node
  • The layers model.
  • Process
  • Implementation of each layer.

6
Our Project
  • Modeling of the BT connection establishment
  • Precise
  • Easy to change
  • Easy to use

7
The subnet
  • The masters are looking for slaves

8
The node model
  • The algorithm decides to which mode to enter.
  • The bt_modes implement the algorithm request.
  • The receiver and transmitter deal with the radio
    packets from/to bt_modes.

9
The process model
  • Each red state represent real state in the BT
  • Switching states by interrupts.
  • We can switch from/to Page, Page scan, Standby by
    packets from the algorithm.

10
The process model (cont)
11
Page
  • Page init
  • Page action
  • Page
  • Page response

12
Page scan
  • Ps init
  • Ps action
  • Page scan
  • Ps response

13
Validation
  • The algorithm determines the variables for the
    unit.
  • Once all these variables determined the time to
    connection is determined as well
  • Tests
  • Different awakens time.
  • Different offset.
  • Estimated offset
  • SR mode

14
Examples
  • Slaves mode R0
  • All number are in slots

15
Future work (for next semester)
  • Simulate Inquiry and Inquiry scan
  • Check different algorithms to increase
    performance
  • Searching time on each mode
  • best behavior for a neutral unit
  • Who should seek for new units

16
Work schedule
  • December 2003 simulating inquiry,inquiry scan.
  • January, February 2004investigating different
    algorithms.
  • March 2004 formulating results and conclusions.
Write a Comment
User Comments (0)
About PowerShow.com