NS0-509 Dumps Questions and Answers

About This Presentation
Title:

NS0-509 Dumps Questions and Answers

Description:

Enjoy your success in Netapp Certification Exams with our NetApp Certified Implementation Engineer - SAN, ONTAP Exam Dumps!!! NS0-509 Dumps Questions Answers with NetApp Certified Implementation Engineer - SAN, ONTAP Practice Test software is a success leading way towards your Netapp NS0-509 Exam. All the NS0-509 Questions Answers are tested and approved by professional experts to assure 100% success in Netapp NCIE SAN ONTAP exam. Get the huge discount 15% off on all products by using this coupon code “15max”. Visit us for more information on – PowerPoint PPT presentation

Number of Views:8

less

Transcript and Presenter's Notes

Title: NS0-509 Dumps Questions and Answers


1
Netapp NS0-509 NetApp Certified Implementation
Engineer - SAN, ONTAP
2
Thinking of best NS0-509 Dumps for your Netapp
NS0-509 Exam??? Here it is at Dumpspedia. We
present outstanding NS0-509 Exam dumps with 100
valid and verified NS0-509 Questions Answers. All
NS0-509 Dumps are obtainable in both PDF file and
Exam Engine formats. Free Demos are available to
experience the interface and proficiency of our
NS0-509 Practice Tests.
NS0-509 Braindumps
NS0-509 Practice Dumps
3
You dont need to take any stress about your
NS0-509 Dumps Questions. We will provide you
some demo questions and answers of NS0-509 Exam
Dumps here.
NS0-509 Braindumps
NS0-509 Practice Dumps
4
Did You Know!
NS0-509 Braindumps
NS0-509 Practice Dumps
5
QUESTION 1, You recently bought a FAS8200 series
with SAS drives and want to maximize data
efficiencies. Performance is not a primary Which
two statements are correct in this scenario?
(Choose two.) A. Enable both inline and post
process efficiencies. B. Enable always-on
compaction. C. Enable always-on
deduplication. D. Enable compression. Answer A C
www.dumpspedia.com/NS0-509-dumps-questions.html
6
  • QUESTION 2,
  • You need to move a LUN non-disruptively from an
    AFF A200 HA pair to an AFF A700 HA pair within
    the same 4-node cluster using the steps shown
    below.
  • 1. Scan the host OS to discover all paths to the
    LUN.
  • 2. Execute the lun move command to move the LUN
    to the AFF A/00 HA pair.
  • 3. Remove the AFF A200 HA pair from the
    reporting-nodes list.
  • 4. Add the AFF A700 HA pair to the
    reporting-nodes list.
  • What is the correct sequence in performing, these
    steps?
  • A. 1, 2, 3. 4
  • B. 4. 1, 2, 3
  • C. 4, 3. 2. 1
  • 3, 2, 1,4
  • Answer B

www.dumpspedia.com/NS0-509-dumps-questions.html
7
QUESTION 3, An enterprise customer has both a
NetApp FAS8200 4-node cluster and a third-party
storage array in a shared SAN environment. The
host servers connect to both storage vendors'
arrays in the fabric. Regarding (he hosts in this
scenario, what are- two NetApp best practices
when performing this task? (Choose two.) A. Set
the default timeout values and storage parameters
for the host system. B. Provide isolation between
storage systems using NetApp's multitenancy
feature. C. Always use the same adapter for
heterogeneous storage systems. D. Use separate
adapters to connect to each vendors' storage
system. Answer A D
www.dumpspedia.com/NS0-509-dumps-questions.html
8
QUESTION 4, A storage administrator created a LUN
using two ports on a storage system. Later,
additional LUNs were added to the same node as
the original LUN. After a while, the performance
of the original LUN dropped beyond an acceptable
level. What would you advise to remedy the
Issue? A. Add an additional switch between the
hosts and cluster. B. Add new LIFs on unused
ports. C. Add new LIFs on the used
ports. D. Reduce the queue depth on the used
ports. Answer B
www.dumpspedia.com/NS0-509-dumps-questions.html
9
QUESTION 5, An SVM's LUN setup needs to have LIFs
that are configured for FC access and iSCSI
access. The administrator will also be using
NetApp Virtual Storage Console. In this scenario,
which three types of LIFs are required? (Choose
three.) FC LIFs A. management LIFs B. iSCSI data
LIFs C. NAS data LIFs D. intercluster
LIFs Answer A B C
www.dumpspedia.com/NS0-509-dumps-questions.html
10
QUESTION 6, You are planning few a new AFF A700
2-node switchless FC solution with two Cisco 9100
switches. Each AFF A700 will have one 16 Gb port
Connected to each Cisco 9100 switch and four FC
LIKs per physical port. You want to guarantee
recovery from connection loss on a NetApp
physical port and you are using single initiator
to multiple target zoning. What is the minimum
number of zones required to accomplish this
task? A. 8 B. 4 C. 2 D. 1 Answer C
www.dumpspedia.com/NS0-509-dumps-questions.html
11
QUESTION 7, You will be purchasing two high
availability NetApp AFF A700s systems. You want
to set up a 4-node cluster. Which switch would
you use for the cluster interconnect
switches? A. NetApp CN1610 B. Cisco Nexus
3132Q-V C. Cisco Nexus 5548UP D. Cisco Nexus
5020 Answer B
www.dumpspedia.com/NS0-509-dumps-questions.html
12
QUESTION 8, An administrator has an AFF A200
cluster at their primary site that is used for FC
connectivity to servers. For disaster recovery
purposes they want to start replicating their
data to another AFF A3Q0 cluster In a secondary
location. The AFF A300 is In a site that has no
FC or FCoE capable switches, and is currently
only used for CIFS data. A cluster peering
relationship already exists between the two
clusters. Which three additional actions are
needed for the data to be ready for access from
hosts at the secondary site? (Choose
three.) A. Create zones with the appropriate
initiators and targets for the secondary
site. B. Enable the iSCSI service on the SVM at
the secondary site. C. Replicate the data from
the primary site to the secondary site with
SnapMirror. D. Create new iSCSI igroups for LUN
mapping. E. Enable the iSCSI service on the SVM
at the primary site. Answer B C D
www.dumpspedia.com/NS0-509-dumps-questions.html
13
QUESTION 9, Your server administrator upgraded a
Windows 2016 Server from 16 Gb to 32 Gb HBAs. The
application owner is now reporting slower
performance to the AFF A700. Which two actions
will help troubleshoot performance on the server?
(Choose two.) A. Verify the HBA model using
Hardware Universe. B. Verify the HBA firmware
using the Interoperability Matrix
Tool. C. Confirm that LUN mapping
exists. D. Confirm that Windows Host Utilities Is
installed. Answer A B
www.dumpspedia.com/NS0-509-dumps-questions.html
14
WHY CHOOSE US!
Offering Effective PDF Tests Training to
Individuals and Companies
100 Passing Assurance on All Dumps
Special Student Discount Available
Printable and Searchable PDF Braindumps
User Interactive Exams Software
NS0-509 Braindumps
NS0-509 Practice Dumps
15
NS0-509 Braindumps
NS0-509 Practice Dumps
16
Good luck
Dumpspedia provides you guaranteed success in
NS0-509 Dumps Questions as we have latest
NS0-509 Exam Dumps. Click Here following link to
download NS0-509 Exam Braindumps.
NS0-509 Braindumps
NS0-509 Practice Dumps
Write a Comment
User Comments (0)