RECENT CAL PROBLEMS (including DQM person confusions) and DQM SHIFT TODO REMINDER

1
RECENT CAL PROBLEMS(including DQM person
confusions)and DQM SHIFT TODO REMINDER

• T. Schörner-Sadenius
• Hamburg University
• CAL Meeting, 11 January 2005

2
RECENT PROBLEMS and QUESTIONSMost required
actions from TSS/Wladimir/Alessandro.

• Keep in mind Up-to-date SOS-page reachable from
  CAL home page. Look first there, then call
  (especially in the night).
• We will soon have check lists for all actions
  (see last slide). Use them!
• Problems
• No change_version after time offsets measurement
  after access ? confusion.
• Dying menelaus PC ? actions from AP,Kerstin, Ulf,
  
• Dying AJAX disk ? v3876 could not be used in
  global/local? running for some time with bad
  calibration took some hours to sort problem
  out.? always install new version after
  calibration and take local run with it!
• B22 and B21 HV off ? mostly solved by instruction
  crew on phone.
• CAL timing shifted by 50ns in GSLT and TLT
  histos ? CFLTP cable.
• RCO GSLTltgtDC off sync, GSLT.DC.MISMATCH in
  logfile ? CFLTP cable.
• RCO GFLT component CAL keeping busy ? CFLTP
  cable
• Various power glitches ? switch everything back
  on!
• Please make use of ALL CAL_QUICK_CALIB runs that
  are there and install (newcalconv,
  change_version, change_version_main) the derived
  calibration versions in chronological order!

3
TODO SHIFT PERSONWe want to calibrate as often
as possible!

• Morning
• Read elog book entries. Anything unusual during
  the night? Magnets off? In doubt call TSS.
• Phone shift crew to find out about HERA plans. We
  need bad channel update every day. ADC2VOLT and
  FEC at least once a week.
• Check last nights DQMCOC histos on the web
  presenter.
• Check the newly reconstructed runs in zmon (web
  or cal_check).
• Check ping page.
• Daily
• Take check-out runs using auto_checkout.sh.
• Bad channel update using auto_badchannel.sh.
• Uno scale factors using unocomp and updateUno.
• Take an SRTDFLT checkout run.
• Stay tuned to HERA conditions (RCO viewer)
  calibration possibilities?
• Evening
• Check DQMCOC histograms for the runs of the day.
• Check ping page.

Mail to TSS Significant news?
4
TODO SHIFT PERSONWe want to calibrate as often
as possible!

• Every week (at least)
• Do an auto_adc2volt.sh.
• Do a full calibration using auto_fec.sh.
• Do a trimming (using trimming in caw on
  teucer).
• Attend the components meeting on Monday at 11.
• Give your weekly shift report in the CAL
  Wednesday meetings. Please bring always a bit
  more than just naked numbers we should try to
  make this an opportunity for education!
• After an access / after magnets off
• After an access or after the magnets were off we
  need a full calibration (after an access
  including DU offsets and time offsets only in
  presence of coordinator)!
• Especially the DU offsets with the required
  access to the HV and the complete lowering of the
  HV of all modules is critical.

Mail to TSS Significant news?
5
TODO SHIFT PERSONWe want to calibrate as often
as possible!

• Always
• Carry the mobile phone and answer to calls
  immediately.
• Inform TSS if problems / questions.
• Read web pages and keep yourself and your
  colleagues informed of what is going on
• CAL generals
• HERA and ZEUS status.
• Tell TSS if non-trivial problems we will put
  them on our SOS-CAL page.
• Log your actions in our web tool (until we have
  better means) and, if relevant for ZEUS, in the
  electronic log book.

6
Action Tu We Th Fr Sa Su Mo Comment
Read elog
Ping page
Shift crew phone
DQMCOC morning run range?
ZMON Run range?
Checkout runs Run numbers?
Analysis old CQC Runs? New versions?
BC update (run numbers, calib version)
Update UNO scale factors After each BC udpate
ADC-to-Volts (run numbers, calib versions)
FEC (run numbers, calib version)
Trimming (run numbers)
BC update(s) (run numbers, calib version(s))
DQMCOC evening (run range)
Ping page