Folie 1

1
Project overview
F. Lamnabhi-Lagarrigue

• Global view
• Consortium
• Review 2 recommendations
• Major achievements M13-M18
• HYCON Deliverables
• Dissemination

2
Global view

• Integration Research Spreading activities
• continuation of progress all tasks are being
  executed successfully
• very productive meetings (WP3 - WP4a WP4d
  WP5)
• great integration efforts WP3 WP4x WP6
• good handling of the deviations
• some delays for the creation of the Institute but
  in a good way
• reports and tools delivered on time

• 2) Dissemination (all vectors)
• communication - visibility
• publications trainings
• strategy
• IAB / IAC

3) Review 2 recommendations - including workplan
for M13-M30 - are (some currently) faced
3

26 partners from 10 countries 140 researchers,135
PhD
Light Associations - UCB CHESS
- Upenn

• VERIMAG IMAG

- Univ Dijon - ENSEEIT -LAG
RTHW
CNR
UVA
4
Review 2 WP recommendations Future work -
General recommendations

• For WP1 WP4d WP5 and WP6, see next
  presentations
• For WP2 no specific action required
• For WP3 WP4a - WP4b and WP4c The
  recommendations have been
• taken into account or are currently faced to be
  discussed at Review 4 (M24)
• Important milestone Hybrid Control European
  Network Workshop , 1-2 June 2006

• 4 deliverables accepted with qualifications have
  been resubmitted
• D3.5.1 submitted (minor corrections)
• D4c.4.1 Proceeding of the First HYCON Workshop
  on Automotive Application of Hybrid Systems was
  revised adding a section on Remarks from the
  industrial participants that reports feedback
  from the industrial partners present at the
  workshop.
• D5.4.4 - acknowledged by the Commission on 27
  June 2005.
• D8.4.1 - Updating of next 18 Months JPA work
  programme

5
Review 2 recommendations, contd

• General recommendations page 19-20
• no action
• institute manager
• D3.5.1 D4c.4.1 D5.4.4
• Links of all WPs, especially WP4x, to IAB
• Matrix problems X applied tools
• to document outcomes of meeting
• to document milestones (short report)
• WP4d restriction to homogenous, wireless
  networks
• HYCON visibility outside Hybrid Control
• visibility and practicality of the website and of
  the HYCON material
• ISC biased towards the US
• reallocation of resources from WP5 to WP3
• DoW M13-M30 accepted with qualifications

6
Major achievements M13-M18
For WP1 WP4d WP5 and WP6, see next
presentations
WP2 - focused on the preparation of benchmark
cases (preparation of the platforms and
communication systems, model development, data
collection for identification and test definition
D2.2.2) and the implementation of benchmark
exercises (announcing the call for the Solar
Plant and Idle Speed Control System Benchmark,
collecting proposals and selection of the
accepted proposals - D2.3.2).
WP3 Tool repository The features of the new
Modelica library are sketched in D3.4.3. The
library is freely available and can be downloaded
from the WP4b webpage.
WP4a D4a.3.1 contains a) the results of the
first 18 months of the coordinated work carried
out by the partners and b) the detailed JRAs -
divided into three focus areas Modelling and
simulation tools, Power generation and
transmission control, Power electronics control.
A common working platform has been set up assess
the performance jointly work on the development
of new methods.
WP4b - Ongoing work on case studies and methods
as planned, additional industrial case study for
large transitions refrigeration system (Danfoss)
preparation of the WP4b industrial workshop at
ESCAPE PSE 2006, Garmisch-Partenkirchen
WP4c - three case studies identified and
collaboration between partners on the common
research work set up Task 4c.1 Hybrid models
for automotive control - Task 4c.2 Hybrid
control in automotive applications - Task 4c.3
Design methodologies for embedded automotive
control systems preparation of the HYCON
CEMaCS Workshop , Lund.
7
Progress of WP3 on Tool Integration

• Special session ( WP3 Meeting) at Mathmod,
  Vienna, Feb-2006
• Tool Integration and Interchange Formats for
  Hybrid Systems
• Presentations from SICONOS, Berkley, TU Berlin,
  HYCON ? Preparation of D3.6.1, Report
  Requirements for an interchange format for
  nonlinear hybrid systems
• Next general WP3 meeting ADHS06 in June 79

?
?
?
?
?
?
8
WP4b Progress in M13-M18 Summary

• Tasks focussed on development of technology
• 4b.1 Procedures for verification of satey-related
  discrete controls
• 4b.2 Control of large transitions in processing
  plants
• ? new case study industrial refrigeration
  system provided by Danfoss
• (plan inclusion of Danfoss into the IAB)
• 4b.5 Techniques for ensuring a safe operation of
  industrial controlled systems
• 4b.6 Complexity reduction for the computation of
  hybrid controllers
• ? Progress as planned
• Dissemination (task 4b.4)
• ? contributions to different conferences (in
  particular ECC-CDC 2005)
• ? submission of an invited session on industrial
  hybrid controls to ADHS 2006
• ? initial planning of an industrial user workshop
  at PSE/ESCAPE 2006
• Events
• ? 3rd meeting in Seville on Dec 16, 2005 (all
  nodes of WP4b were represented)

9
Deliverables due at M18
10
HYCON dissemination
11
HYCON dissemination

• Communication - visibility
• IEEE Control Systems Society Newsletter (HYCON
  Benchmark Award Announcement
• HYCON Outstanding Lecturer Programme , Joint
  CTS-HYCON Workshop)
• HYCON poster (new one by July 2006)

Research - training

• HYCON list of publications
• International Journal of Control, Special Issue
  on Advanced Design Methodologies in Automotive
  Control,
• CDC-ECC05
• - Tutorial Hybrid Control of Networked
  Embedded Systems A report will be published in
  Control Systems Magazine and an extensive paper
  was published in the EJC.
• - Workshop Model Predictive Control of Hybrid
  Systems, Full Day
• - Workshop Identification of Hybrid Systems,
  Half Day
• Workshop Topics in Computation and Control,
  Santa-Barbara 27-28/03/2006, HSCC06
• Hybrid Control European Network Workshop and
  HYCON CEMaCS Workshop on Automotive Systems and
  Control, Lund, June 1-2
• two Invited sessions at ADHS06 (accepted),
  Calghero, Sardigna, June 7-9
• CTS-HYCON Graduate Paris School on Control, 13
  March- 10 June, Intensive teaching 12 modules
  (21h)
• Workshop Joint CTS-HYCON Workshop on Nonlinear
  and Hybrid Control, Paris La Sorbonne, 10-12 July
• WP4b industrial workshop at ESCAPE PSE 2006 - 6th
  European Symp. Computer Aided Process Eng. and
  9th International Symposium on Process Systems
  Engineering, Garmisch-Partenkirchen 9-13 July

12
HYCON dissemination, contd

• Strategy
• Participation ARTEMIS Subgroup
• Recommendations for a research agenda in Europe
• Publication in the Parliament Magazine