Wrap Installation and Removal by Picture This Wraps and Graphics

1
Wrap Installation and Removal by Picture This
Wraps and Graphics
2
Introduction

• Welcome to our presentation on wrap installation
  and removal. Wraps are a great way to customize
  your vehicle or promote your business, but it's
  important to know how to properly install and
  remove them to avoid damage to your vehicle and
  ensure a professional-looking finish.
• Improper installation or removal can result in
  bubbles, wrinkles, and damage to your paint job.
  Additionally, if you're using wraps to advertise
  your business, a poorly installed or removed wrap
  can reflect poorly on your brand. That's why
  we're here to provide you with all the
  information you need to properly install and
  remove wraps.

3
Tools and Materials

• Before starting any wrap installation or removal
  project, it's important to have the right tools
  and materials on hand. Here is a list of items
  you will need
• - Heat gun Used to heat up vinyl wraps so they
  can be stretched and molded around curves and
  contours.
• - Squeegee Used to smooth out bubbles and
  wrinkles in the vinyl wrap during installation.
• - Razor blade Used to trim excess vinyl wrap
  from edges and corners.
• - Isopropyl alcohol Used to clean and prepare
  the surface before installing or removing the
  vinyl wrap.
• - Microfiber cloth Used to wipe down the surface
  after cleaning with isopropyl alcohol.
• Be sure to have all of these items ready before
  beginning your wrap project. Having the right
  tools and materials can make all the difference
  in achieving a professional-looking result.

4
Preparing the Surface

• Before you begin installing or removing a wrap,
  it's important to make sure the surface is
  properly prepared. Failure to do so can result in
  a subpar installation or damage to the underlying
  surface. Here are some steps to follow
• First, wash the surface with soap and water to
  remove any dirt or grime. Next, use a degreaser
  to remove any oils or other contaminants that
  could interfere with the adhesive. Rinse
  thoroughly and let the surface dry completely
  before proceeding.

5
Wrap Installation

• Clean the surface thoroughly with soap and water,
  then dry it completely with a clean towel.
• Measure and cut the wrap to fit the surface,
  leaving a few extra inches on each side to ensure
  full coverage.
• Peel off the backing paper from one end of the
  wrap, being careful not to touch the adhesive
  side.
• Apply the exposed adhesive side of the wrap to
  the surface, starting at one end and working your
  way across. Use a squeegee or similar tool to
  smooth out any air bubbles or wrinkles as you go.

6
Conclusion

• In conclusion, we have learned that properly
  installing and removing wraps is crucial for
  maintaining the appearance and value of your
  vehicle or other surfaces. By following the steps
  outlined in this presentation, you can ensure a
  successful and long-lasting wrap application and
  removal process.
• Remember to always use the necessary tools and
  materials, properly prepare the surface, and
  follow the step-by-step instructions for
  installation and removal. Taking these extra
  precautions will save you time, money, and
  frustration in the long run.
• We encourage you to take what you have learned
  today and apply it to your own projects. With
  practice and patience, you can become a wrap
  installation and removal expert.

7
Thank you