5 Things to Inspect If Your BMW Says Engine Overheated From Certified Mechanics in Austin

1
5 Things to Inspect If Your BMW Says Engine
Overheated From Certified Mechanics in Austin
2
The engine is the most important part of your BMW
inside which the internal combustion process
takes place.
3
The combustion process produces a lot of heat
the heat needs to be properly managed to prevent
the engine from overheating.
4
There are various factors that can cause the
engine to overheat in your BMW.
5
Here are the 5 things to inspect if the engine in
your BMW overheats.
6
Radiator Issues
7
The radiator helps in the cooling of the hot
coolant that flows into the radiator after it
circulates through the engine.
8
Most of the time it is observed that issues with
the functioning of the radiator prevent the
coolant from cooling down.
9
When this heated coolant again flows into the
engine it leads to overheating of the engine.
10
Malfunctioning Thermostat
11
The thermostat is responsible for restricting the
flow of coolant into the engine before it warms
up.
12
The thermostat controls the opening and closing
of the valves to let in the coolant inside the
engine.
13
At times, the malfunctioning thermostat is behind
the overheating of the engine as it doesnt let
the coolant enter the engine.
14
Damaged Water Pump
15
The coolant also needs to flow at a specific rate
throughout the engine this is controlled by the
water pump.
16
If the water pump fails, then it adversely
affects the flow of coolant and this causes
engine overheating.
17
A damaged water pump needs to be replaced for the
smooth flow of the coolant.
18
Lack of Engine Oil
19
At times, the overheating of the engine in your
car is not linked to the flow of coolant but to
other factors.
20
Engine oil is an important fluid in your vehicle
that is responsible for lubricating the moving
parts of the engine.
21
If there is a lack of adequate engine oil in your
car, then it can lead to various kinds of issues
including engine overheating.
22
Failure of Head Gasket
23
The head gasket is responsible for preventing the
mixing up of the coolant with the engine oil of
the car.
24
Most of the time failure of the head gasket is
related to the overheating of the engine in your
car.
25
Failure of the head gasket leads to the engine
oil and the coolant mixing up and this reduces
their efficiency.
26
The above-discussed factors are some of the
leading parts that need to be inspected if the
engine overheats.
27
Take your BMW to a certified repair shop for
getting it diagnosed and fixed.
28
Contact Us
512-883-0761
11008 N Lamar Blvd Austin, TX 78753
https//swedishautoservice.com/