Find Out 4 Different beam configurations for cable tray - PowerPoint PPT Presentation

About This Presentation
Title:

Find Out 4 Different beam configurations for cable tray

Description:

Here in this FRP cable tray manufacturers will explain four different beam configurations that you can get in a universal cable tray installation. Let’s discuss all four beam configurations like- simply support beam, fixed beam, etc. – PowerPoint PPT presentation

Number of Views:43
Slides: 9
Provided by: TribeniFiber
Category: Other

less

Transcript and Presenter's Notes

Title: Find Out 4 Different beam configurations for cable tray


1
Range Of Beams Are Used For Installation Of FRP
Cable Trays
2
  • An installed cable tray, cable ladder, or channel
    support system can be taken as a loaded beam. FRP
    cable trays manufacturers will explain four
    different beam configurations that you can find
    in a general cable tray installation. Lets
    discuss all four beam configurations-

3
Simply Supported Beam
  • Its a single length of cable ladder, channel, or
    cable tray mounted on, but not equipped with two
    supports and represent single supported beam.
    Simply supported beam bends as any load is
    applied to it.
  • This simple beam mechanism doesnt realistically
    model several real life installations.

4
Fixed Beam
  • A fixed beam mechanism is a single structural one
    having both ends fastened tightly to supports.
    Unlike single beam, fixed beam configuration
    significantly increases the beam potential to
    carry loads.
  • Fixed beam has some useful properties and assists
    designers to grasp the more complex behavior of
    multispan, continuous cable tray installation.

5
Continuous Beam
  • A general multi-span cable ladder or cable tray
    acts like a continuous beam. When the numbers of
    spans are more, it gets closer to similarity.
    However, when in practice, cable ladder run
    should consist of joints and can never be
    considered of infinite length.
  • When you load the run of cable tray uniformly
    from end to end, the load on every span is in
    balance with the loads on the adjoining spans.

6
  • Due to this, the inner spans act as fixed beams
    that are having considerably load-carrying
    potential. But the end spans are hardly
    counterbalanced, thus they work more akin to
    simple beams with lesser load carrying potential.

7
Cantilever Beam
  • Cantilever beam arrangement mostly happen with
    the brackets that are employed to support cable
    tray or cable ladder. You need to call
    manufacturers for safe working loads on
    cantilever arms.
  • These are the beams used for installation of
    cable trays and ladders. To source premium range
    of beams and avail assistance for installing and
    configuring beams, you can call Satyam India
    Company today. They are offering best quality frp
    cable trays, fiberglass cable trays, and GRP
    products across the world.

8
Tel91 97128 50506 91 95866 50506 91 97125
45777
http//www.tribenifiber.com/
EVERSHINE APPLIANCES PVT. LTD. Plot No. 41,
Ichhapore GIDC, Opp. ONGC, Near GAIL,
Sachin-Hazira Road, Bhatpore Village, Surat - 394
510 (Guj.) INDIA. CIN U27108GJ2004PTC044421
Write a Comment
User Comments (0)
About PowerShow.com