Is It Useful To Employ Cylinder Sleeves In BMW Engine? - PowerPoint PPT Presentation

View by Category
About This Presentation
Title:

Is It Useful To Employ Cylinder Sleeves In BMW Engine?

Description:

Liner sleeves experts have made surveys and now they will talk about the cons (if any) of using sleeves in BMW engines. – PowerPoint PPT presentation

Number of Views:88
Slides: 5
Provided by: hardikaegis
Category: Other

less

Write a Comment
User Comments (0)
Transcript and Presenter's Notes

Title: Is It Useful To Employ Cylinder Sleeves In BMW Engine?


1
Is It Useful To Employ Cylinder Sleeves In BMW
Engine?
2
There is a controversial side that surrounds BMW
engines and cylinder sleeves. We include oil
consumption, sleeves dropping, excessive noise,
etc. in the list. Liner sleeves experts have made
surveys and now they will talk about the cons (if
any) of using sleeves in BMW engines. There is no
disadvantage of using sleeves in BMW engines.
The specified sleeves installed precisely will
work seamlessly and provide more durability that
you cannot expect from a non-sleeved block.
Street builds, track builds, stroker builds, big
HP forced induction builds are not the problems.
There are manufacturers who have sleeved dozens
of BMW engines in their machine shop and sold
hundreds of BMW sleeves to the shops across the
globe.
3
The only drawback people see is caused by poor
installation practices. For instance, when you
add any foreign object to the block, which had
nothing in it to start with, logically we could
say that block has been compromised. This can be
proved right if done in wrong way. Oil
consumption is nothing. Several cases of oil
consumption usually arise when the hone pattern
is incorrect. However, noise is something about
to worry. When you install sleeves with excess of
piston to wall clearance, it sounds louder during
warm up. It is because of the iron lining the
cylinders. You can prevent it by watching the
piston to wall clearance during the sleeves
honing.
4
There are many reasons to support usage of
cylinder sleeves. Most commonly, they are found
in developed aluminum blocks. It is due to the
fact that no wear and tear and sealing properties
are needed unless it is coated. In higher
performance applications, manufacturers prefer
ductile iron cylinder sleeves as they are twice
the strength of a standard cast iron sleeve. When
engineers intend the sleeve properly, it fits
well the block that eventually increase its
strength. If you are roaming around to
find quality cylinder sleeves in your town,
contact the reliable auto parts exporters today.
You can also count on Liner Sleeves manufacturers
that supply premium range of products across the
world.
About PowerShow.com