Conveyor Belt Scanning and Basic Troubleshooting

1
Conveyor Belt Scanning and Basic
Troubleshooting
NIPL Engineering Pvt. Ltd
2
Fixing a conveyor belt in time can save hassles
in the long run. Preventing downtime due to
conveyor belt failure can help the business
improve their productivity. Timely
Troubleshooting can prevent Conveyor belt
scanning hassles.
3
Understand the performance Always be alert while
working with conveyor belts. Labels sticking on
conveyor belt and bent guardrail could be a sign
for caution. Check the bearings Using a metal
tip check if the conveyor belt is making noise.
If it runs smoothly you can hardly hear any
sound. Keep the tools in place While fixing a
Hytrol conveyor keep a 9/16 wrench, Leatherman
type and ½ wrench. Most of your problem will be
solved using multi-tools.
4
Check photo eyes Most common problem that arises
could be due to a partially aligned photo eyes.
Even though the photo eye is not aligned properly
it can still reflect the beam. Remember that a
photo eye positioned at the center of the
reflector means it is properly aligned. In case
it is sticking to one edge there is always a risk
of it falling off. Check the switches Make
sure that the switch of the motor power is turned
off.
5
Nothing wrong Move the box forward if you are
not able to figure out the glitch. Stick a note
in the place where the issue was noted so that
you can identify the location next time when the
same thing happens and you can fix it
quickly. Take adequate notes on the problems
that occurred. The more information you gather
about the machine, you are aware of its
functioning. You can also snap some pictures or
take a video of the problem. It can help present
the problem in a better way.
6
NIPL Engineering Pvt. Ltd Phone [phone]
5016 91 444 214 5017 Email
info_at_beltpro.in Website http//www.beltpro.in/