Why You Should Use A Purging Compound: A Few Reasons

1
(No Transcript)
2
Why You Should Use A Purging Compound A Few
Reasons
You could likely cleanse your hands with only
water. but, does it make sense? Similarly, you
could clean your injection moulders, extruders,
and blow moulders with Virgin resin and
regrind but, does it make sense?
Why should you be using a Purging Compound?
Because its faster, more effective and saves a
lot in the long run. It contains components such
as emulsifiers, abrasives or foam agents. It will
speed up removing contamination from the barrel.
They are specially designed for this purpose.
Its 2-6 times faster than virgin resin 100
times faster than manual cleaning.
Purging Compounds for Blow Molding are designed
to push impurities out of the system. Here is why
it makes sense to use Purging Compounds.
Reduces Scrap It effectively reduces scrap by
clearing out the last residues of resins and
colours from production, thus decreasing the
amount of waste generated. This improves your
factory productivity and efficiency.
Reduces Downtime Unlike the use of re-grinds,
commercial Purging Compounds are designed to
clean efficiently! There is a shorter downtime
and increases the efficiency of machinery and
workers. It reduces the time wasted in resin
changeovers. Faster changeovers also allow you to
save on staff time.
3
Eliminate Contamination Their chemical
components help you to remove carbon residues,
colour streaks and gels during production
changeovers. This improves your factory rejection
rates and avoids annoying machine stops during
the production process.
Prevent Screw Pulls The contamination needs to
be removed somehow. If the machine is not cleaned
thoroughly, it will eventually be necessary to
remove the screw and manually clean it.
Eliminate any Contamination from the Hot Runners
Certain injection moulding changeovers may
require more time due to stubborn colour residues
inside the hot runners. Fortunately, there are
Purging Compounds available that can be safely
used through the mould. Liquid Purging Compounds
are particularly beneficial in this situation.
Reduce Rejection Rates By cleaning the machine
properly after a material/colour change or long
shutdown, you will prevent product rejections by
your quality team or awkward orders returned by
your customer.
Cost-effective Purging Compounds help you to
decrease costs by reducing downtime and scrap
during colour and material changes. All aspects
need to be taken into account when assessing this
solution. It may include the material, machine,
labour, scrap, customer satisfaction, lost
production, and the cost of Purging Compounds.
Take into consideration the cost of replacing
parts due to the inefficient cleaning of machines
using in-house solutions. Also consider the
downtime, the lost production and the waste due
to contaminated products. You will see there is a
significant savings that commercial purging
products offer.
4
(No Transcript)
5
Consistency in Producing Quality Use the Purging
Compound that is right for your applications. You
will consistently see an increase in savings and
produce quality products.
Discover the most cost-effective Purging
Compounds produced by Bharati Polychem Pvt Ltd.
They are using a customer-centric approach and
deep research development to produce a
UNICLEANPLUS Purging Compound.
It is useful for customers during the transition
of their colour and material changes. It also
reduces or eliminates the black specks and colour
streaking during the process. UNICLEANPLUS
Purging Compounds also aid in routine
maintenance, preventative maintenance and machine
shutdown or start-up. Visit https//www.unicleanpl
us.com/ today to learn more about the Purging
Compound for Blow Molding!
To Read Our Published Blog
https//unicleanplus.weebly.com/blog/why-you-shoul
d-use-a-purging-compound-a-few-reasons
Thank You!
6
UNICLEANPLUS Address Bharatipolychem Pvt Ltd,
Plot No-451 City Lesliganj State Jharkhand Zip
822118 Country India Phone 91
9021232809 Website https//www.unicleanplus.com/
Email sales_at_bharatipolychem.com