Standards and Tests: Small Wind Turbines - PowerPoint PPT Presentation

About This Presentation
Title:

Standards and Tests: Small Wind Turbines

Description:

Standards and Tests: Small Wind Turbines Brent Summerville PE Technical Director Small Wind Certification Council Commissioner s Forum: Urban Wind Turbines – PowerPoint PPT presentation

Number of Views:753
Avg rating:3.0/5.0
Slides: 25
Provided by: Jane186
Learn more at: https://www.nyc.gov
Category:

less

Transcript and Presenter's Notes

Title: Standards and Tests: Small Wind Turbines


1
Standards and TestsSmall Wind Turbines
  • Brent Summerville PE
  • Technical Director
  • Small Wind Certification Council
  • Commissioners Forum Urban Wind Turbines
  • July 30, 2010, 1pm - 4pm

2
SWCC Small Wind Certification Council
  • New independent, third-party certification body
    to serve North America
  • Certify that small wind turbines (SWTs) meet the
    requirements of the new AWEA Small Wind Turbine
    Performance and Safety Standard
  • Used as state-level eligibility for incentives

3
What is the AWEA Standard?
  • AWEA Small Wind Turbine Performance and Safety
    Standard (AWEA Standard 9.1 2009)
  • Incorporates, with modifications, existing IEC
    standards for small wind turbines (IEC 61400
    series)
  • Written to ensure the quality of the wind turbine
    can be assessed while imposing only reasonable
    costs and difficulty

4
Equipment Eligibility
  • Per the AWEA standard and IEC standards
  • Newly manufactured, electricity-producing wind
    turbines with a swept area up to 200 m2
  • 200m2 16m diameter rotor 50-65 kW
  • Horizontal and vertical axis turbines are
    eligible

5
Certification based on
  • an evaluation of
  • Wind turbine design (Structural Analysis)
  • Field testing

6
Field Testing
  • SWCC Test Organization List now has 26 test
    organizations
  • 4 new NREL supported Regional Test Centers

7
NREL Independent Testing Project, Round 1
Joe Smith joe.smith_at_nrel.gov
Windspire
Gaia-Wind 11kW
ARE 442
EW50
VT10
8
IEC Tests Performed
  • Power Performance power curve, annual energy
    production
  • Acoustic Noise sound power level, sound
    pressure levels
  • Duration operational time fraction, power
    degradation, inspections, dynamic behavior
  • Safety and Function - verification of designed
    behavior

9
View Results at
www.nrel.gov/wind/smallwind/independent_testing.ht
ml
10
Upcoming event on Urban Wind Energy August
11-12, 2010 Boulder, CO
11
Beech Mtn Test Site Appalachian State North
Carolina
12
Myres Hill Test Site TUV-NEL East Kilbride,
Scotland
13
Beech Mtn Test Site Appalachian State North
Carolina
Alternative Energy Institute Test Site West Texas
AM Canyon, Texas Average turbulence intensity
of 0.10
14
Installed in Urban Environment
Tested in Open Terrain
Higher turbulence reduced performance higher
stresses on the design potentially inadequate
design
15
Installed on a Building
Tested on a Tower
Stresses and dynamic behavior assessed on
ground-mounted tower dynamic loading and
stresses on a building are unknown
16
(No Transcript)
17
http//www.caebridge.com/urban-wind-and-rooftop-tu
rbine-placement
18
Urban Studies
  • MT2 the maintenance team for IEC 61400-2 Design
    requirements for small wind turbines
  • Research projects to better understand wind
    characteristics in the urban environment
  • Turbulence
  • Effects on reliability, performance and
    structural design of SWTs

19
Murdoch University - Jonathan Whale
  • How to accurately characterize turbulence
  • How does measured turbulence compare with models
    from -2

20
Excerpts from Japanese studyA Study of the
Small Wind Turbine in an Urban site
  • Hideki Tokuyama Nasu Denki Tekko Co.
  • Masafumi Kawakami Zephyr Co.
  • Yasuhiro Takata NIKKO Co.


21
A Power performance of a Micro Wind Turbine for
a Field Test on an Urban Site
In order to examine the power performance in the
urban site, we perform a field test for a micro
wind turbine.
3300
2580
This position is 8m in height from the ground.
Surroundings of this place is the environment
where is lined with buildings.
22
Wind environment on an urban site
Turbulence intensity
The turbulence intensity is calculated by using
the set of 10 minutes data,
In a urban area, TI shows the tendency which
becomes large. The value of TI becomes about
0.3.
23
Conclusion
  • Potential mismatch between conditions of testing
    and certification of SWTs and the conditions seen
    by SWTs installed in the built environment
  • Research is underway to better understand urban
    conditions and how these conditions relate to the
    current design and testing standards
  • Research needed on safety issues and dynamic
    loading on buildings

24
Thanks
  • Sign up for mailing list
  • www.smallwindcertification.org
  • Click Get E-mail Updates
  • Brent Summerville PE
  • Technical Director, SWCC
  • Brent_at_smallwindcertification.org
Write a Comment
User Comments (0)
About PowerShow.com