ROUTING IN MOBILE AD-HOC NETWORKS - PowerPoint PPT Presentation

About This Presentation
Title:

ROUTING IN MOBILE AD-HOC NETWORKS

Description:

ROUTING IN MOBILE AD-HOC NETWORKS Le Nam Thang Wang Xun Sriram Krishnamoorthy Problem Definition Determination and management of routes between nodes in the adhoc ... – PowerPoint PPT presentation

Number of Views:96
Avg rating:3.0/5.0
Slides: 15
Provided by: ohi102
Category:

less

Transcript and Presenter's Notes

Title: ROUTING IN MOBILE AD-HOC NETWORKS


1
ROUTING IN MOBILE AD-HOC NETWORKS
  • Le Nam Thang
  • Wang Xun
  • Sriram Krishnamoorthy

2
Problem Definition
  • Determination and management of routes between
    nodes in the adhoc network.

3
Solution characteristics
  • Different metrics to optimize
  • Should address frequent changes in
  • Topology
  • Traffic Patterns, etc.
  • Handle any system characteristics such as
    unidirectional links.
  • Should address trade-off between latency in
    determining a route and the overhead of route
    management (control traffic and state).

4
Routing metrics
  • Route length (hops)
  • Signal stability (SSR)
  • Freshness of route (AODV)
  • Association stability (ABR)

5
Classification
Ad hoc routing protocols
Flat routing
Hierarchical routing
Geographical position Augmented routing
Proactive
Reactive
CGSR
HSR
Proactive
Reactive
AODV
DSR
LAR
DSDV
WRP
GPSR
DREAM
6
Flat Routing
  • Flat routing protocols assume a flat topology
  • All nodes are equally involved in routing.

7
Hierarchical Routing
  • Hierarchical routing protocols choose some nodes
    which act as the backbone of the MANET.

8
Geography Oriented Routing
Uses geographical information (say from GPS) in
routing.
9
Proactive Routing Protocols
  • Maintain data structures which indicate the path
    to be taken for each destination node (also
    called table-driven protocols).
  • Keep the data structures up-to-date by periodic
    exchange of information.

10
Proactive Routing Protocols
Destination Metric Next Hop
MH1 2 MH2
MH2 1 MH2
MH3 2 MH2
MH4 0 -
MH5 2 MH6
.
Table for node MH4
11
Reactive Routing Protocols
  • Determine a route to a destination only when a
    request for transmission to that node arrives
    (also called on-command or source-initiated
    protocols).
  • Usually cache newly found routes to minimize the
    latency involved in route discovery.
  • Involve three phases
  • Route discovery
  • Route maintenance
  • Route erasure

12
Reactive Routing Protocols
13
Extensions
  • Special routing protocols for specific
    situations
  • Power-aware routing
  • Security issues.
  • Multicast
  • QoS support

14
Problems
  • Making explicit the trade-off between latency and
    state to maintain.
Write a Comment
User Comments (0)
About PowerShow.com