Developing Transnational Project Indicators - PowerPoint PPT Presentation

About This Presentation
Title:

Developing Transnational Project Indicators

Description:

Developing Transnational Project Indicators – PowerPoint PPT presentation

Number of Views:94
Avg rating:3.0/5.0
Slides: 20
Provided by: Inter311
Category:

less

Transcript and Presenter's Notes

Title: Developing Transnational Project Indicators


1
Developing Transnational Project Indicators
2
The purpose of indicators
gt Indicators are useful tools that allow
programme and project managers to monitor-
Progress- Efficiency- Effectiveness
3
The purpose of indicators 2
  • The CADSES programme will use your indicators to
    measure your achievements.
  • The indicators you choose must give an accurate
    picture of what you are doing.

4
The purpose of indicators 3
  • gt You can also use indicators within the
    partnership.Use targets to define delivery
    responsibilities and quality requirements.
  • For example
  • Partner 3 is responsible for Development of 3
    new technologies to reduce mercury levels in Lake
    X by 50 by 2007.
  • This transparency makes project work much easier.

5
Basic Terminology
  • Activities The work done in your project
  • Input The resources you use to carry out the
    activities
  • Outputs What your project produces/delivers
  • Results The immediate benefits
  • Impacts The long-term benefits

6
For example...
  • Activity Writing a report
  • Input 300 staff hours, 10.000
  • Output Report on spatial development in CADSES
    area
  • Result Increased awareness of spatial
    development issues in CADSES area
  • Impact Improved policies based on this new
    knowledge

7
Role of Transnational indicators
Output Result Impact
Spatial development perspectives
European integration
Impact
Networking(administration, research, private
sector, countries)
Learning(spatial development, foreign systems)
Result
Documents (analytical, strategic)
Meetings (seminars, workshops, conferences)
Others
Output
8
The limitations of indicators 1
  • gt Indicators cannot give a full picture of
  • your project they can only provide a
  • snapshot of the status of some of the
  • work being done.
  • gt Therefore, the first decision is to decide
  • WHAT to measure what are the interesting and
  • important parts of the project?

9
The limitations of indicators 2
  • It is often impossible to measure the long-
  • term benefit (the impact) of a project within
    the lifetime of that project.
  • Projects must still provide indicators of what
    the expected impacts are and how it would be
    possible to measure them in future.
  • Sometimes it may only be possible to state that
    the project will make a contribution to achieving
    change. This happens when it is impossible to
    differentiate the impact of the project from the
    impact of other activities.

10
The need for logical connection between indicators
  • GOOD (Clear connections)
  • Output New filters at water treatment plant -gt
  • Result Nitrate levels in water fall by 50 -gt
  • Impact Fish stocks in river increase by 25
  • BAD (No logical connection)
  • Output Analysis of transport systems
  • Result Networking between transport workers
  • Impact Less pollution from trucks

11
Indicators must also be S.M.A.R.T
  • S Specific
  • M Measurable
  • A Achievable
  • R Relevant
  • T Timed

12
Specific
  • GOOD
  • Tourism SMEs in target area have 25 increase in
    turnover
  • BAD
  • - Business performance is better

13
Measurable
  • GOOD
  • - Increase in number areas with access to
    broadband internet services. (km2)
  • Achievable
  • GOOD
  • 25 crime reduction in pilot project area
  • BAD
  • - No crime in pilot project area

14
Relevant ... to the projects and programmes
objectives
  • Timed
  • ... stating when something should happen.
  • For example,
  • Increase in number of visitors to region by end
    of project / by end 2010 / in 2006, etc.

15
Other indicator essentials
  • Indicators are quantitative.
  • They need a UNIT so we know what is being
    measured.
  • A BASELINE so we know the figure at the start of
    the project.
  • A TARGET so we know the figure that the project
    hopes to achieve.

16
For example
UNIT
  • Increase in amount of freight (tonnes) carried by
    boat on River X by end of 2007.
  • (Current amount 1.7 million. Estimate by end
    2007 2 million)

BASELINE
TARGET
17
Qualitative indicators
  • Although indicators should be quantitative, a
    qualitative statement will sometimes say more
    about the project.
  • If you use this kind of indicator you still need
    to find some way of measuring the qualitative
    change.

18
Qualitative indicators 2
  • For example
  • Improvement in quality of life ( of residents
    measured by survey in May 2008)
  • Like every other project, this one will
  • also have to budget for data collection to
  • measure performance on this indicator.

19
Conclusions Good indicators must be
  • Directly related to the projects most important
    objectives.
  • Logically structured
  • SMART (Specific, Measurable, Achievable, Relevant
    and Timed)
  • Provided with a unit, baseline and target
  • Necessary data collection should be included in
    project budgets
Write a Comment
User Comments (0)
About PowerShow.com