Liquid Vials - PowerPoint PPT Presentation

Loading...

PPT – Liquid Vials PowerPoint presentation | free to download - id: 74523f-NTU3N



Loading


The Adobe Flash plugin is needed to view this content

Get the plugin now

View by Category
About This Presentation
Title:

Liquid Vials

Description:

Liquid Vials To begin, make sure you have the proper supplies: vial of solution, syringe and needle assembly, and alcohol pad. (NEED TO ADD ALCOHOL PAD TO THIS PIC ... – PowerPoint PPT presentation

Number of Views:9
Avg rating:3.0/5.0
Slides: 20
Provided by: Dad142
Learn more at: http://i3dlearning.pbworks.com
Category:
Tags: liquid | vials

less

Write a Comment
User Comments (0)
Transcript and Presenter's Notes

Title: Liquid Vials


1
Liquid Vials
2
To begin, make sure you have the proper supplies
vial of solution, syringe and needle assembly,
and alcohol pad.
  • (NEED TO ADD ALCOHOL PAD TO THIS PIC)

3
  • Remove dust cover from vial.

4
  • Open alcohol pad.

5
Wipe rubber stopper with alcohol pad.
  • Avatar Be sure to allow the alcohol to dry. The
    desiccant effect of the evaporated alcohol is
    what destroys most microorganisms.

6
  • Pull an amount of air a little less than or equal
    to the amount of medication needed from the vial.
  • Tip Remember, do not remove the cap yet.

7
  • Uncap the needle.
  • AIR SHOULD BE IN THIS SYRINGE SO THE PLUNGER
    SHOULD BE PULLED BACK TO AN AMT EQUAL TO THE MED
    NEEDED FROM THE VIAL

8
  • Place the needle tip on the rubber stopper with
    the bevel facing up.
  • The needle is to be held at a slight angle.

9
Whats wrong with this situation?
  1. This needle is at too much of an angle and bent.
  2. Skjfdlkdsf
  3. Jdsflksjf

10
  • Puncture the rubber stopper by pressing down on
    the angled needle pushing the needle straight
    into the vial.

11
  • Inject the air in the syringe into the vial.

12
  • Pull solution from the vial into the syringe.
  • The positive pressure created by the injected the
    air should make it easier to pull solution from
    the vial.

13
Whats wrong with this situation?
  • Holding vial incorrectly

14
  • Withdraw the amount of solution needed from the
    vial
  • Make sure to keep the needle in the solution or
    you will get air bubbles.

15
  • Inject any air bubbles back into the vial.

16
  • Withdraw the needle from the vial.

17
  • Recap the needle.

18
  • Avatar According to your work area and the
    facilitys policies and procedures,
  • verify that you have used the correct drug and
    obtained the correct dosage of the medication.

19
  • You can practice these steps as many times as
    needed. When you think you can do this procedure
    on your own, choose the On Your Own Activity.
  • NOTE Feedback for wrong answers three X marks.
    They cant continue. Suggestion box that they
    need more practice.
About PowerShow.com