Home sphygmomanometers - PowerPoint PPT Presentation

1 / 56
About This Presentation
Title:

Home sphygmomanometers

Description:

Home sphygmomanometers Tekin AKPOLAT, MD Professor of Internal Medicine Ondokuz Mayis University School of Medicine Department of Nephrology SAMSUN-TURKEY – PowerPoint PPT presentation

Number of Views:197
Avg rating:3.0/5.0
Slides: 57
Provided by: Hakan49
Category:

less

Transcript and Presenter's Notes

Title: Home sphygmomanometers


1
Home sphygmomanometers
  • Tekin AKPOLAT, MD
  • Professor of Internal Medicine
  • Ondokuz Mayis University School of Medicine
  • Department of Nephrology
  • SAMSUN-TURKEY
  • November 21, 2009 ANTALYA

2
Plan
  • Introduction
  • Home sphygmomanometers and features
  • Validation protocols
  • Limitations of the validation protocols
  • Accuracy of sphygmomanometers
  • Potential role of nephrologists
  • Conclusions/Summary
  • References

3
Purpose of this presentation
  • Summarize basic features of automated home BP
    measurement devices
  • Emphasize the distinction between validation,
    calibration and accuracy of automated home
    sphygmomanometers
  • Discuss some practical points for improvement of
    BP control in CKD for nephrologists.

4
Other topics
  • Aneroid and mercury sphygmomanometers
  • Proper patient preparation
  • Patient training
  • BP measurement techniques
  • Potential advantages of SMBP and 24h ABPM
  • Automated devices used for 24 hours ABPM or in
    hospitals will not be discussed

5
(No Transcript)
6
Current situation 1
  • The introduction of inexpensive, easy-to-use, and
    automated BP measuring devices, lead to a
    widespread use of SMBP at home and SMBP at home
    became a part of clinical practice including CKD.

7
Current situation 2
  • According to a nation-wide survey in 20042005 in
    Japan, 90 of clinicians recommended home blood
    pressure measurement and 77 of hypertensive
    patients have a sphygmomanometer at home.
  • The proportion of patients owning a monitor has
    increased from 49 in 2000 to 64 in 2005 (USA).

8
(No Transcript)
9
Home sphygmomanometers
  • Mercury, aneroid, automatic, and semi-automatic
  • Mercury the gold standard
  • Aneroid practical difficulties
  • Automated preferred
  • Measurement of BP with an automated device is a
    simple procedure.

10
Features of automated home sphygmomanometers 1
  • Measurement site (upper arm, wrist, finger)
  • Appropriate cuff-size
  • Availability of smaller or larger sized cuffs
  • One device-two cuffs
  • Comfort cuff (22-42 cm)

11
Features of automated home sphygmomanometers 2
  • Validation status in general population
  • Validation status in special groups
  • Model/type
  • Accuracy

12
Features of automated home sphygmomanometers 3
  • Arrhythmia detection
  • Consecutive 3 measurements
  • Avoidance of pumping to too high levels
  • Multi-user facility
  • Easy to use
  • XL size display
  • Infrared interface

13
Features of automated home sphygmomanometers 4
  • Quick measurement
  • Capacity of memory
  • Modern style
  • Small dimensions (suitable for traveling,
    handbags)
  • Equipped with carrying bag
  • Soft case
  • Easy wrap cuff

14
Features of automated home sphygmomanometers 5
  • Washable cuff cover
  • Batteries included
  • Minimum number of batteries
  • Low battery indication
  • Rechargeable battery pack
  • Enabling PC connectability via USB cable

15
Features of automated home sphygmomanometers 6
  • Software for use with a PC
  • Links to PC separate printer
  • With printer
  • Bluetooth output to telemedicine service
    providers
  • Blood pressure classification indicator
  • Hypertension Indicator

16
Features of automated home sphygmomanometers 7
  • Hide display function
  • Advanced Positioning Sensor
  • Wrist position sensor
  • Voice speaks readings
  • Voice speaks orders
  • Automatic switch off

17
Features of automated home sphygmomanometers 8
  • Fully automated deflation
  • Tracking of morning hypertension
  • Time and date of measurement
  • Pulse rate
  • Provide trend plots

18
Important/essential features
  • Measurement site (upper arm, wrist, finger)
  • Appropriate cuff-size
  • Validation status in general population/ special
    groups
  • Accuracy

19
Wrist/upper arm
  • Wrist devices are popular
  • Wrist diameter is little affected by obesity
  • Strict attention should be paid to having wrist
    at heart level while operating the device.
  • Three specific guidelines and two relevant
    websites recommend upper arm devices
  • A validated finger device is not available

20
Appropriate cuff-size
  • Obesity is an increasing problem
  • Cuff bladder must encircle at least 80 of the
    arm.
  • The manufacturer's specifications can be followed
  • Recommendations AHA and BSH
  • Smaller or larger cuff-sizes Extra payment

21
Validation/accuracy
  • Validation protocols are objective guides
  • Two useful websites
  • All models/types of any trademark or company
    present in the market are not validated
  • The validation protocols do not guarantee
    accuracy of a particular device for an individual
    patient

22
(No Transcript)
23
Validation protocols 1
  • AAMI
  • BHS
  • International protocol
  • Japan ISO-WG

24
Validation protocols 2
  • The basis of the validation tests is the
    comparison of BP measured by the device being
    tested with measurements made by trained
    observers, using a mercury sphygmomanometer under
    control of one or two experts.
  • BP should be measured with the arm supported at
    heart level after 10-15 min rest.

25
Validation protocols 3
  • Indirect measurement of BP using a mercury
    sphygmomanometer is preferred, direct
    (intra-arterial) or simultaneous measurements
    have some disadvantages.
  • A sequential same-arm method was used for
    comparison of tested automated and mercury
    sphygmomanometers.
  • The devices are tested over a wide range of BP
    categories with a certain number of subjects in
    each category.

26
(No Transcript)
27
(No Transcript)
28
Validation in special groups 1
  • The BHS protocol described validation procedures
    for special groups such as pregnant women,
    children and elderly people
  • The basis of additional validation testing for
    elderly population is increased arterial
    stiffness with aging which is a manifestation of
    CKD including predialysis period

29
Validation in special groups 2
  • Arterial stiffness can influence the
    correspondence between readings taken by mercury
    sphygmomanometers and oscillometric devices.
  • Up to now, only one home sphygmomanometer was
    validated for dialysis patients (Blood Press
    Monit 2007 12 227-232)

30
Validation in special groups 3
  • Arterial stiffness is also increased in diabetes
    mellitus which is the most common cause of CKD in
    most of the countries.
  • Special patient groups such as early stages of
    CKD, diabetic nephropathy or patients having
    extraosseus/vascular calcifications may require
    specific validation tests.

31
Blood Press Monit 2002 7 313-8.
32
Blood Press Monit 2002 7 313-8.
  • Gerin et al have addressed the clinically
    relevant issue of device accuracy in individual
    patients for the first time.
  • They planned a theoretical study and made an
    empirical test to estimate the proportion of
    persons for whom a BP monitor validated according
    to existing BHS and AAMI standards would be
    inaccurate.

33
Blood Press Monit 2002 7 313-8.
  • They have shown that errors do tend to cluster
    within persons, and by concentrating solely on
    the population mean error, the BHS and AAMI
    protocols allow the approval of monitors that are
    inaccurate for a substantial proportion of
    people.
  • As a result, they concluded that under these
    validation criteria, it is possible that more
    than half of patients will have an average error
    greater than 5 mmHg, and more than one in four
    will have an average error greater than 10mmHg.

34
They proposed two stages for validation.
  1. The model of the monitor in question should be
    validated at the population level.
  2. The particular monitor unit should be validated
    in the physicians office for the intended user.

35
International protocol
  • In order to decrease individual inaccuracy, the
    IP introduced a tertiary phase whereby the device
    was assessed according to the number of subjects
    in whom it gives accurate measurements in
    addition to its overall accuracy.

36
Blood Press Monit 2008 13 187-91
  • The statistical power of three validation
    protocols (AAMI, BHS and International) have been
    compared by Friedman et al and they concluded
    that the decrease of participants from 85 to 33
    in the IP reduced its statistical power from 98
    to 70 .

37
Accuracy of sphygmomanometers 1
  • Validation, accuracy and calibration are
    different and confusing concepts.
  • Calibration is a procedure to control accurate BP
    measurement and it assesses a sphygmomanometer
    under in-vitro conditions.
  • For automated sphygmomanometers, calibration is
    the assessment of the accuracy of the pressure
    transducer, which requires specialized equipment.

38
Accuracy of sphygmomanometers 2
  • Although calibration of the pressure transducer
    is essential for an automated device, it does not
    address the accuracy of BP determination.
  • Accuracy can only be determined by clinical
    testing.

39
Accuracy of sphygmomanometers 3
  • The American Heart Association, American Society
    of Hypertension, Preventive Cardiovascular Nurses
    Association and European Society of Hypertension
    guidelines on SMBP emphasized the importance of
    checking monitors for accuracy in 2008.

40
Samsun experience 1
  • We planned a campaign to determine the accuracy
    of home sphygomanometers in 2006.
  • The findings have been published in two articles
    Blood Press 2008 17 3441 and Blood Press
    Monit 2009 14 2631..

41
Samsun experience 2
  • We realized that a significant proportion of the
    devices had individual accuracy problems.
  • Devices having a difference greater than 4mmHg
    were considered inaccurate.
  • After learning that their newly purchased devices
    were inaccurate, most of the patients returned
    them to the retailer, who in turn forwarded them
    to the importer.

42
Samsun experience 3
  • The technical service of the importer found that
    the calibration was normal in almost all of the
    devices.
  • The company did not consider inaccuracy a problem
    and returned the device back to the patient.
  • The patients came back, there was nothing to do.

43
Published studies/guidelines
  • The devices were checked for accuracy using two
    methods in previous studies assessment of
    calibration and sequential measurement.
  • The percentage of inaccurate automated devices
    was higher than 40 in all studies using the
    sequential method for the evaluation of accuracy
  • This high inaccuracy rate is the evidence of
    magnitude of the individual accuracy problem.

44
Calibration/Accuracy
  • Calibration and accuracy are different concepts
  • Accuracy can only be determined by clinical
    testing But HOW?

45
HOW WILL THE INDIVIDUAL ACCURACY BE CHECKED?
  • The cutoff value for inaccuracy began from
    greater than 3mmHg many investigators used at
    least 5mmHg, and Ali and Rouse J Hum Hypertens
    2002 16359361 considered inaccuracy an error
    of greater than 10 mmHg.
  • The relevant guidelines emphasized the importance
    of checking the individual accuracy, but did not
    mention how to do it.

46
Blood Press Monit 2009 14 208-215.
47
Blood Press Monit 2009 14 208-215.
  • This study described a method for the assessment
    of individual accuracy in details.
  • The three pivots of this method are sequential
    measurement, the number of BP measurements and
    cutoff values for assessment.

48
Blood Press Monit 2009 14 208-215.
  • The test has three stages
  • Sequential measurement of BP similar to
    validation protocols (mercury, tested device,
    mercury..) was used for the first time for the
    assessment of individual accuracy.
  • The tested devices were categorized into 4 groups

49
(No Transcript)
50
Potential role of nephrologists
  • Recommendation for purchase of a validated device
    (trademark and model/type)
  • Checking of the device of the patient for
    accuracy
  • Teaching of BP measurement technique
  • Observation of the patient while operating the
    device

51
Practical points
  • Two useful websites
  • Measurement of arm circumference
  • Supplementation with CD, video, easily readable
    booklets, brochures
  • The PA.NET International Quality Certification
    Protocol (Blood Press Monit 2008 13 285-9)

52
Conclusions/Summary 1
  • Inaccuracy of home sphygmomanometers is a common,
    neglected and ignored problem.
  • Measurement site, cuff-size, validation status,
    and accuracy are the most important features.

53
Conclusions/Summary 2
  • Individual accuracy can be more important in
    special patient groups such as early stages of
    CKD, diabetic nephropathy or patients having
    extraosseus/vascular calcifications.
  • The nephrology clinics have a great role and
    responsibility to encourage optimal circumstances
    for SMBP at home for their patients and they can
    be organized for training programs and check of
    individual accuracy.

54
Conclusions/Summary 3
  • Active guidance of nephrologists to all steps of
    SMBP at home will improve control of BP and
    increase quality of patient care in CKD.

55
References
  • http//www.dableducational.org.
  • http//www.bhsoc.org/blood_pressure_list.stm
  • J Hypertens 2008 26 1505-26.
  • J Cardiovasc Nurs 2008 23 299-323.
  • J Hypertens 1993 11 (suppl 2) S43S63.
  • Blood Press Monit 2009 14 208-215.
  • Blood Press Monit 2002 7 313-8.
  • Blood Press Monit 2002 7 3-17.
  • Hypertens Res 2003 26 771-82.

56
  • If you want this presentation
  • Please send an email to
  • tekinakpolat_at_yahoo.com
  • In 10 days
Write a Comment
User Comments (0)
About PowerShow.com