SAFETY FIRST - PowerPoint PPT Presentation

View by Category
About This Presentation
Title:

SAFETY FIRST

Description:

SAFETY FIRST ... safety first – PowerPoint PPT presentation

Number of Views:216
Avg rating:3.0/5.0
Slides: 20
Provided by: Dave1196
Learn more at: http://bruceag.weebly.com
Category:
Tags: first | safety | care | duty | first

less

Write a Comment
User Comments (0)
Transcript and Presenter's Notes

Title: SAFETY FIRST


1
SAFETY FIRST
2
(No Transcript)
3
(No Transcript)
4
(No Transcript)
5
(No Transcript)
6
(No Transcript)
7
(No Transcript)
8
General Safety Policies
  • All students must wear clothing suitable to the
    activity (shop coats, aprons, or school clothes).
  • Students must remove or securely fasten neckties,
    jewelry, loose clothing, long hair, etc.
  • Students must wear approved safety eye protection
    at all times while in a laboratory, except in
    safe areas as designated by the instructor.

9
  • All guards and other safety equipment must be in
    place and operating correctly.
  • Students must at all times have permission from
    the instructor to work in the laboratory.
  • Everyone should know where and how to find first
    aid.
  • A running machine must never be left unattended.

10
  • Accident reports must be filled out on all
    injuries and on near injuries as well.
  • All material and equipment damage must be
    reported.
  • No student may use any machine on which he-she
    has not been properly instructed.
  • There must be at least two people present in the
    laboratory.

11
  • The work area and work surfaces should be kept
    clean
  • of scraps,
  • liquids, and
  • unnecessary
  • equipment.
  • No horseplay
  • or
  • roughhousing
  • is allowed in the laboratory or shop.

12
Safety for portable power tools
  • KNOW YOUR POWER TOOL Read instructions
    carefully. Learn its applications and
    limitations as well as the specific potential
    hazards of using this tool.
  • GROUND ALL TOOLS UNLESS DOUBLE-INSULATED If
    tool is equipped with three-prong plug, it should
    be plugged into a three-hole electrical
    receptacle. If adapter is used to accommodate
    two-pronged receptacle, the adapter wire must be
    attached to known ground. Never remove third
    prong.

13
  • KEEP GUARDS IN PLACE and in working order.
  • KEEP WORK AREA CLEAN. Cluttered areas and benches
    invite accidents.
  • AVOID DANGEROUS ENVIRONMENTS. Dont expose power
    tools to rain or use in damp, wet, or gaseous or
    explosive locations. Keep work are well lit.

14
  • STORE IDLE TOOLS. When not in use, tools should
    be stored in dry, locked-up place.
  • DONT FORCE TOOL. It will do the job better and
    safer at the rate for which it was designed.
  • USE RIGHT TOOL. Dont force small tool or
    attachment to do the job of a heavy-duty tool.

15
  • WEAR PROPER APPAREL. No loose clothing or jewelry
    to get caught in moving parts. Rubber gloves and
    footwear are recommended when working outdoors.
  • USE SAFETY GLASSES with most tools. Also face or
    dust mask if cutting operation is dusty.

16
  • DONT ABUSE CORD. Never carry tool by cord or
    yank it to disconnect from receptacle. Keep cord
    from heat, oil, and sharp edges.
  • SECURE WORK. Use clamps or a vise to hold work.
    Its safer than using your hand and it frees both
    hands to operate tool.
  • DONT OVERREACH. Keep proper footing and balance
    at all times.

17
  • MAINTAIN TOOLS WITH CARE. Keep tools sharp and
    clean at all times for best and safest
    performance. Follow instructions for lubricating
    and changing accessories. CAUTION Do not use
    carbon tetrachloride.
  • DISCONNECT TOOLS. When not in use before
    servicing when changing accessories such as
    blades, bits, cutter, etc.

18
  • REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of
    checking to see that keys and adjusting wrenches
    are removed from tool before turning it on.
  • AVOID ACCIDENTAL STARTING. Dont carry plugged-in
    tools with finger on switch. Be sure switch is
    off when plugged in.
  • WEAR EAR PROTECTORS when using for extended
    periods.

19
  • ACCESSORIES. The use of any accessories other
    than those listed or recommended for this
    particular tool may be hazardous.
  • KEEP HANDS AWAY FROM CUTTING EDGES AND ALL MOVING
    PARTS.
About PowerShow.com