Scanned Probe Imaging of Switching Centers in Molecular Devices - PowerPoint PPT Presentation

About This Presentation
Title:

Scanned Probe Imaging of Switching Centers in Molecular Devices

Description:

Title: Superconducting Nanowires and Nanowire SQUIDs Author: Tinkham group (JL copy) Last modified by: cnlau Created Date: 3/14/2000 2:58:14 PM Document presentation ... – PowerPoint PPT presentation

Number of Views:37
Avg rating:3.0/5.0
Slides: 33
Provided by: Tinkhamg
Category:

less

Transcript and Presenter's Notes

Title: Scanned Probe Imaging of Switching Centers in Molecular Devices


1
Scanned Probe Imaging of Switching Centers in
Molecular Devices
Chun Ning (Jeanie) Lau Dr. Duncan Stewart Dr. R.
Stanley Williams Prof. Marc Bockrath (Caltech)
  • HP Labs
  • Quantum Science Research

2
Molecular Electronics
  • Challenges
  • Fabrication
  • Architecture
  • New devices
  • Ultimate limit of miniaturization
  • Self-assembly ? low fabrication cost

3
Fault-tolerant Architecture
Nano-imprint Lithography
  • fast fabrication of nm scale features over cm area
  • HPL TeraMAC
  • 1 THz multi-architecture computer
  • Largest defect-tolerant computer
  • 220,000 (3) defective components
  • 106 gates operating at 106 cycle/sec
  • addresses problem of lt100 yield

Heath et al, Science (1997).
6 Gbits/cm2
Y. Chen, G.Y. Jung et al. (2003).
4
Molecular Switches
  • Potential applications as memory or logic devices
  • Previously studied systems Nanopore, STM,
    cross-bar
  • Molecules studied rotaxane, catanane, OPE,
    etc

Unsolved Question
  • What are the switching mechanism(s)?
  • Proposed
  • conformational change of molecules
  • eletrical charge transfer, electron localization
  • molecule-metal contacts

5
Switching of Metal/Alkane/Metal Junctions
Our Experiment
6
Switching of Metal/Alkane/Metal Junctions
1
2
Ti
3
Pt
4
  • Asymmetric electrodes (Ti Pt)
  • Reversible switching dependent on bias direction

Stewart et al, Nano Lett., in press.
7
Novel Scanned-Probe Technique
  • Apply mN force with AFM tip while measuring
    device conductance
  • Simultaneously explores electrical and local
    mechanical properties
  • AFM tip not electrically connected to the device

8
AFM Imaging of Mechanically-induced Conductance
Response
  • Plot conductance through junction as a function
    of tip position
  • AFM tip applies mN force ? pressure 103 104
    atm

9
Conductance Map (off state)
Topography
off
Conductance (Off)
15 mm
Molecular junction in the off state exhibited
no observable electrical response to local
mechanical perturbation by the AFM tip.
10
Conductance Map (On state)
Topography
Conductance (On)
15 mm
  • A nanoscale conductance peak (switching
    center) emerges when the junction turn on.

11
Switching Centers
Switching on of a device is always accompanied
by the emergence of a new nanoscale
pressure-induced conductance peak.
12
Switching off
1
2
3
1
The switching center faded and completely
vanished with successive switchings to lower
conductance states.
2
3
13
Our Experimental Finding
Lau et al, in preparation.
  • Under mechanical pressure, a single nanoscale
    conductance peak (switching center) appears when
    the junction is switched on, and disappeared
    when off.
  • Formation and dissolution of nanoscale
    structural inhomogenities on the junction give
    rise to switching.

What are these inhomogenities?
14
A Simple Model
  • Transport across molecular monolayer via
    tunneling
  • When switched on, electrodes move closer
    together within a nanoscale region ? dominate
    transport
  • Conductance only increase when the AFM tip is
    compressing the nano-asperity.

Nano-asperity (top or bottom electrodes)
15
Applying Pressure with AFM tip
Elasticity theory (LandauLifshitz) point force
applied to semi-infinite plane strain
at (x,y,d)
E Youngs modulus 80 GPa for metals and
alkane molecules d thickness of top electrode
30 nm
  • Monolayer compressed by dz ( 0.2 Å for F 1
    mN)
  • Spatial resolution 40 nm Limited by tip
    radius and thickness of top electrode.

16
A Simple Model
  • Nano-asperity dominate transport

G Goff (Gon-Goff )exp (- b ? dz(x, y))
nano-asperity located at (0,0)
off state conductance
1.2 mS
1.4
No free parameters Goff 0.1mS, Gon1.3mS,
b1Å-1, dz (0,0) 0.2 Å
  • Good agreement between model and data
  • switching on ? growth of asperity

17
Nanoscale Filaments
On/off ratio 105
  • Ggtgtconductance quantum GQ ? Continuous
    filamentary pathway
  • switching ? formation and dissolution of
    nano-filaments
  • Nature and growth mechanism of filaments?
  • (thermal migration, electrochemical reaction,
    electro-migration)

18
Effect of Force on Conductance
600 nm
Force
Current
0.1 mN
Conductance within a switching center increases
with increasing applied force.
0.6 mN
1.5 mN
3 mN
Vbias 0.1 V
19
Conclusion
  • Novel experimental technique that probes
    nanocale conductance pathways through molecular
    junctions
  • New switching mechanism with high on/off ratio
    due to formation and break-down of conductive
    nano-filaments

Under Investigation
  • filament growth mechanism
  • pressure dependence
  • other systems (other molecules, different
    electrodes)
  • role of electrodes in metal/molecule/metal
    structures ? better engineering of
    molecule-based devices.

20
mastery of nanoscale systems
  • molecular devices
  • superconducting nanowires nanorings
  • ferromagnetic nanowires
  • single molecules
  • carbon nanotubes
  • nanosensors

Were only at the base camp.
21
Silicon ElectronicsWires SwitchesArchitectu
reLithography DepositionComplex physical
structurePerfect fabricationMemory Logic
NanoelectronicsWires SwitchesChemical
synthesis assemblySimple physical
structureImperfect fabricationArchitecture?Me
mory Logic
22
Nanoscale filaments
Nanoscale filaments grows or shrinks ? switching
  • Electromigration?
  • Elecrochemical migration?
  • Thermal migration?
  • Single dominant pathway ? Runaway process?

23
Switching Centers
Device A
Switching on of a device is always accompanied
by the emergence of a new nanoscale
pressure-induced conductance peak.
24
Nanoscale Filaments?
Device A
Device B
  • Unperturbed conductance 800 mS 10 GQ
  • Small increase in conductance under pressure 1
  • Unperturbed conductance ltlt GQ
  • Relatively large increase in conductance under
    pressure 16

25
Nano-imprint Lithography
  • nm scale features over cm area

6Gbits/cm2
Y. Chen, G.Y. Jung et al.
26
Fault-tolerant Architecture
  • HPL TeraMAC
  • 1 THz multi-architecture computer
  • Largest defect-tolerant computer
  • 220,000 (3) defective components
  • 106 gates operating at 106 cycle/sec
  • Built from programmable gate arrays
  • Computes with look-up tables

Philip Kuekes
Collier et al, Science 1998.
27
Nano-imprint Lithography
  • fast fabrication of nnm scale features over cm
    area

6Gbits/cm2
Y. Chen, G.Y. Jung et al.
28
Nano-conducting Channels
Topography
Top Electrode
A local dominant nanoscale conducting channel
Bottom Electrode
Conductance image
29
Switching On of Molecular Junctions
A conductance hot-spot appeared under mechanical
modulation when the junction was switched on.
  • Diameter 50 nm AFM tip radius
  • 10 increase in conductance under 2 mN

30
Another Device
Topography
Conductance
Off
1.025 1.112
1.200 Current (nA)
On
Off
A new hot spot always appeared after switching
on the junction
31
Transport Through Molecular devices
Stewart et al, in preparation.
diode r5 x 105
Chang et al, APL (2003)
Single Molecule Measurements
Nanoscale junctions
32
Molecular Electronics
  • Ultimate limit of miniaturization
  • Self-assembly ? low fabrication cost
  • Designer molecules
Write a Comment
User Comments (0)
About PowerShow.com