Group 3 Alternative Devices - PowerPoint PPT Presentation

1 / 22
About This Presentation
Title:

Group 3 Alternative Devices

Description:

Hattler's device involves a simple catheter to witch about a ... To allow the delivery of an oscillating flow of helium to actuate the balloon ... – PowerPoint PPT presentation

Number of Views:38
Avg rating:3.0/5.0
Slides: 23
Provided by: davidh184
Category:

less

Transcript and Presenter's Notes

Title: Group 3 Alternative Devices


1
Group 3 Alternative Devices
  • Ekaterini Malliari,
  • Malik Alrawashdeh, Siddig Omer, Angelo Fernandes,
    Mamta Naik,
  • David Hughes

2
Hattler Catheter
  • Design and Transfer Rates
  • Ekaterini Malliari
  • Operational Limitations
  •  Malik Alrawashdeh

3
DESIGN
Hattlers device involves a simple catheter to
witch about a thousand tiny fiber membranes have
been attached. A vacuum outside the patients
body pumps pure oxygen into the catheter. When
the O2 reaches the fibers, it is forced out into
the bloodstream by a balloon. CO2 is absorbed and
cleared by the fibers semipermable membranes.
4
HOW DOES IT WORK?
  • The Hattler catheter
  • Is placed within the central venous blood stream,
  • Contains a cylindrical bundle of micro porous
    hollow fiber membranes that are manifolded to gas
    flow pathways in the catheter itself, enabling
    the flow of pure O2 gas from a console outside
    the patient through the hollow fibers of the
    catheter and into the vena cava.

5
HOW DOES IT WORK?
  • The diffusion of O2 is allowed by the fiber
    membranes into the
  • bloodstream, while CO2 diffuses out of the
    bloodstream, into
  • the fibers, and is removed through a second
    gas pathway
  • leading out to the external console.

6
GAS RATES
  • The active mixing of blood provided by the
    balloon pulsation augments gas exchange
    significantly, so that each fiber provides 2 to 3
    times more gas exchange than the fibers in
    conventional extracorporeal blood oxygenators.
  • Over 30 catheters placed in 18 calves have
    demonstrated the Hattler catheter is capable of
    consistently providing 30-40 of the patients O2
    supply and CO2 removal requirements.
  • In vitro performance demonstrates an O2 delivery
    of 140 /- 8.9 ml/min/m2 and a CO2 removal of 240
    /- 6.1 ml/min/m2. While in vivo we have a
    maximum CO2 consumption of 378 /- 11.2
    ml/min/m2.

7
OPERATION REQUIRMENTS AND LIMITATIONS
  • The delivery system has three main functions
  • To supply oxygen to the fiber bundle
  • To remove the oxygen and carbon dioxide exhaust
    gases from the fibre bundle
  • To allow the delivery of an oscillating flow of
    helium to actuate the balloon

8
For maximal oxygen exchange
  • For optimum operation the pressure losses before
    the fibre bundle should be minimised because
  • Any loss of pressure before the fiber bundle will
    detract from the driving gradient for oxygen
    exchange.
  • The pressure losses after the fiber bundle should
    also be as small as possible to reduce the load
    on the driving system.

9
Limitation regarding Balloon drive system and
cardiac output
  • To ensure full filling and emptying of the
    balloon, a low resistance helium pathway is
    required.
  • Balloon fails to fully inflate and deflate the
    balloon above a beat rate 180 beat per min (
    increasing the rate limitation)
  • Size of the balloon limitation
  • Also reduction in cardiac output

10
MicroOxygenators
  • Introduction to MicroOxygenators
  • Siddig Omer
  • Operational Limitations
  • Agnelo Fernades

11
The design
  • A sandwich design.
  • Metal sheets with channel and a membrane
  • Membrane allow O2 CO2through.
  • TS a2/c2
  • 303025cm?human transfer surface(90m2)

12
  • Channel height and is width 100 µm, sheet
    height 200µm, Membrane height 35.
  • Mice-Micro-Oxygenator.

13
Optimisation
  • Better sealing, more robust house.
  • Add heating function.
  • enlarge oxygen exchange / saturation value.

14
  • Problem membrane does not always closes off the
    blood or gas
  • chambers at the resp. inlet and outlet sides.
  • Gluing the membranes to the resp. sheets
    guarantees no overspill.

15
MICRO-OXYGENATORS LIMITATIONS
Priming volume (ml) v/s Transfer surface (m 2)
16
Research Work
  • Better priming volume / transfer surface ratio
  • Sealing of blood chamber
  • Better Geometry design
  • Cost effective sheet production

17
Clinical Trials
  • Hattler Catheter
  • David Hughes
  • MicroOxygenation System
  • Mamta Naik

18
Hattler CatheterTransfer Rates
  • Natural Rate
  • 240 ml/min for O2
  • 200 ml/min for CO2
  • Federspiel, Golob, Hattler et al 2000
  • 250-350 ml/min/m2 for both O2 and CO2
  • Potential increase of 500
  • Increase of rate with active area increase


19
Hattler catheterMortality
  • Quarter of clinical trial patients had adverse
    complications
  • 4 out of 64 died as a result of the catheter
  • Less than a fifth of catheters were mechanically
    faulty
  • Overall a good therapeutic index

20
MicroOxygenator Clinical Trials
  • Clinical trials on humans not yet done
  • Micro- oxygenator used mainly for the mice
    application

21
  • An important performance index for the
  • artificial lungs is the ratio of the priming
  • volume to the transfer ratio
  • The lower the better

22
Questions?
Write a Comment
User Comments (0)
About PowerShow.com