Solar Storm Radiation Model SStoRM - PowerPoint PPT Presentation

About This Presentation
Title:

Solar Storm Radiation Model SStoRM

Description:

1 Model developed while at ANSER; Currently at Marlboro College, VT. ... be useful as a teaching and illustration aid in understanding the severity of ... – PowerPoint PPT presentation

Number of Views:19
Avg rating:3.0/5.0
Slides: 8
Provided by: rontu
Category:

less

Transcript and Presenter's Notes

Title: Solar Storm Radiation Model SStoRM


1
Solar Storm Radiation Model SStoRM
http//hesperia.gsfc.nasa.gov/sspvse/posters/Rona
ld_Turner/October 2005Prepared by Joshua
Lande1Ron Turner2
1 Model developed while at ANSER Currently at
Marlboro College, VT.2 ANSER Suite 800 2900
South Quincy St Arlington, Virginia, 22206
2
SStoRM
  • SStoRM will be useful as a teaching and
    illustration aid in understanding the severity of
    SPEs as our nation embarks on future missions to
    the Moon, Mars and beyond
  • It provides an accessible Graphical User
    Interface, allowing the user to specify
  • The character of the SPE (fluence and energy
    spectrum)
  • The time evolution of the SPE
  • It produces a radiation exposure estimates
  • Absorbed Dose and Dose Equivalent
  • Skin, Eye, BFO
  • In free space and on a simplified lunar surface
  • There is an Exercise Mode of a simulation of an
    astronaut on EVA on the lunar surface

3
SStoRM
Input to SStoRM 8,500 BRYNTRN-3 runs, each
with six products Dose Equivalent (Skin, Eye,
BFO) Absorbed Dose (Skin, Eye, BFO) Human
represented by CAM to account for body
self-shielding Five Aluminum shielding
configurations 0.3 g/cm2 (spacesuit) 1.0
g/cm2 (nominal rover) 5.0 g/cm2 (heavy
rover/light spacecraft) 10.0 g/cm2 (nominal
spacecraft) 30.0 g/cm2 (nominal shelter) Solar
Energetic Particle spectra represented by
4
Choose the Energy Spectrum
  • SStoRM allows the user to specify the K, ?, and
    Eo parameters of the event
  • They also get to specify Emin, or the minimum
    energy value to integrate from when finding the
    integral flux
  • When the calculate button is pressed, the flux is
    graphed along with the spectral curve of several
    historical SPEs
  • The integral flux for all the graphed curves is
    compared in the chart to the right

5
Choose the Time Evolution
  • Here, the user can select A, B1, and B2, the
    parameters of the time evolution curve
  • C is calculated automatically to ensure that the
    integral flux of the time evolution of the event
    is the same as the integral flux of the energy
    spectrum of the event
  • Once the calculate button is pressed, the C
    factor and the graph of the time evolution of the
    event are displayed

6
The Estimated Dose(or How Bad is Your SPE)
  • SStoRM gives total event dose to the Skin, Eye,
    and BFO
  • It does so for thicknesses .3, 1, 5, 10, and 30
    g/cm2
  • The radio buttons let the user select absorbed
    dose or dose equivalent
  • Also, exposure is either for free space or on the
    lunar surface
  • The difference is that the dose on the lunar
    surface is half of the dose in free space

7
Lunar EVA Exercise
  • This exercise allows the user to simulate an
    astronaut working on the moon during an SPE
  • The user can select a warning time that an
    astronaut would receive prior to the onset of the
    event
  • A negative value means that they are warned about
    the SPE that many hours after the event has
    started
  • They then take a given time to pack up and enter
    the rover
  • They then drive back to the base
  • Once at base, they stay under a heavy shielding
    for the remainder of the event
  • Shielding for spacesuit, rover, and base can be
    varied
Write a Comment
User Comments (0)
About PowerShow.com