AII Types for Aggregation draft-metz-aii-aggregate-01.txt - PowerPoint PPT Presentation

About This Presentation
Title:

AII Types for Aggregation draft-metz-aii-aggregate-01.txt

Description:

1. AII Types for Aggregation. draft-metz-aii-aggregate-01.txt. Chris Metz, chmetz_at_cisco.com ... larger prefix field (256 bits vs 32 bits); no AC ID ... – PowerPoint PPT presentation

Number of Views:12
Avg rating:3.0/5.0
Slides: 7
Provided by: ietf
Learn more at: https://www.ietf.org
Category:

less

Transcript and Presenter's Notes

Title: AII Types for Aggregation draft-metz-aii-aggregate-01.txt


1
AII Types for Aggregationdraft-metz-aii-aggregate
-01.txt
  • Chris Metz, chmetz_at_cisco.com
  • Luca Martini, lmartini_at_cisco.com
  • Florin Balus, balus_at_nortel.com
  • Jeff Sugimoto, sugimoto_at_nortel.com
  • Vacouver IETF
  • Nov. 2005

2
Changes from -00
  • Added PWid AII Type (Type 1)
  • compatibility with L2VPN signaling draft
  • FEC129 signaling support of attachment circuits
    provisioned with 32-bit identifier (i.e. PWid
    from FEC128)
  • Short and Long Prefix AII Type fields
    adjustments
  • Global ID is 6 bytes in length (big enough to
    accommodate 2 and 4 octet ASN or IPv6 /48 as
    global identifiers)
  • flags field removed
  • Removed aggregation examples
  • Streamlined text

3
PWid AII Type (Type 1)
  • 0 1 2
    3
  • 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
    0 1 2 3 4 5 6 7 8 9 0 1
  • ---------------------
    -----------
  • AII Type01 Length
    PWid
  • ---------------------
    -----------
  • PWid (contd.)
  • ----------------
  • Used where provisioning model required
    fixed-length 32-bit AII value
  • draft-ietf-l2vpn-signaling-06.txt
  • FEC129 signaling of older PWid-configured
    attachment circuits
  • section 2.1 of draft

4
Short Prefix AII Type (Type 2)
  • 0 1 2
    3
  • 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
    0 1 2 3 4 5 6 7 8 9 0 1
  • ---------------------
    -----------
  • AII Type02 Length
    Global ID
  • ---------------------
    -----------
  • Global ID
    (contd.)
  • ---------------------
    -----------
  • Prefix
  • ---------------------
    -----------
  • AC ID
  • ---------------------
    -----------
  • Used where provisioning model (e.g. inter-domain
    VPWS) permits distribution of AII aggregates
    prior to PWE3 signaling
  • reduced scaling burden on AII distribution
    mechanisms (e.g. MP-BGP) and PE memory
  • section 2.2 of draft

5
Long Prefix AII Type (Type 3)
  • 0 1 2
    3
  • 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
    0 1 2 3 4 5 6 7 8 9 0 1
  • ---------------------
    -----------
  • AII Type03 Length
    Global ID
  • ---------------------
    -----------
  • Global ID
    (contd.)
  • ---------------------
    -----------



  • Prefix


  • ---------------------
    -----------
  • Same use as Short Prefix except
  • larger prefix field (256 bits vs 32 bits) no AC
    ID
  • offers greater numbering flexibility given larger
    prefix field
  • section 2.3 of draft

6
Next Steps
  • Synced up with L2VPN signaling and dynamic MS-PW
    placement drafts
  • We need PWid AII Type for sure
  • and we need Prefix-based AII Types (Short, Long
    or both)
  • Adopt as PWE3 WG document
Write a Comment
User Comments (0)
About PowerShow.com