ND9009 Rectangular Housing

1
ND9009 Rectangular Housing Moldflow Analysis
Report This analysis is checked Flow warp and
weld line position.
2
Cooling system Design
The cooling system is show like picture. All the
channel diameter is 8mm
3
Material Speciality PA6 Latamid 6 H-V0 PA6
PVT data Curve
Viscosity data Curve
4
Processing Setting
Package time curve
5
Gate Method and dimension
The injection system is show like picture. We
suggest add 1 pcs gate on this positon.
Diameter dimension Max 5mm Min 1.5
Pin Gate 1 Pcs
6
Fill time
The gray area is shot short. We suggest change
the gate QTY and add insert with venting.
7
Pressure at V/P switchover
8
Temperature at flow front
9
Volume shrinkage at ejection
10
Volume shrinkage
11
Clamp force and Pressure
max62.59Ton
Max injection pressure is 179Mpa
12
Deflection Z axis
13
Weld line
The black line is weld line. Please check it and
confirm it .