Why Developing? - PowerPoint PPT Presentation

1 / 19
About This Presentation
Title:

Why Developing?

Description:

Reduce drawdown and cost of extracting groundwater. Restore/Rehabilitate well due to gradual clogging and biofouling. Head loss through screen ... – PowerPoint PPT presentation

Number of Views:20
Avg rating:3.0/5.0
Slides: 20
Provided by: gillesw
Category:

less

Transcript and Presenter's Notes

Title: Why Developing?


1
Why Developing?
  • Restore aquifer, following damage due to drilling
  • Reduce head loss by increasing permeability
  • Increase well efficiency
  • Reduce drawdown and cost of extracting
    groundwater
  • Restore/Rehabilitate well due to gradual clogging
    and biofouling.

2
How to reduce head loss?
Head loss in aquifer
Head loss near screen
Head loss through screen
3
Why is it important?
  • Most sensitive area, where flow converges and is
    the fastest
  • Where we still have means to modify the aquifer

4
Ultimate Goals
  • Make the pores as big as possible so water is
    free to flow. Results
  • more flow
  • lower costs of operation (reduced drawdown less
    energy to lift the water reduced hydro bill)

5
Other goals
  • Removes fines
  • Water quality
  • Minimize abrasion on equipment (extend life of
    pumping and piping equipment)
  • Creates zone of Autofiltration

6
(No Transcript)
7
Development Methods
  • Overpumping
  • Surging
  • Air Lift
  • Jetting
  • Explosive (rock aquifer)

8
Overpumping
Drawdown during operation
Increased gradient
Drawdown during development
9
Surging
10
Air lift
11
Jetting
12
(No Transcript)
13
Overpumping Pros
Cons
  • Simple
  • No special equiment
  • No reverse flow
  • No agitation of soil particles
  • Low energy impact
  • Low efficiency
  • Requires removal of fines

14
Autofiltration
15
Surging Pros
Cons
  • Simple technology
  • Low Cost
  • Flow bypass
  • Low level of impact
  • Relatively Low efficiency
  • Requires removal of fines

16
Air Lift Pros
Cons
  • Efficient Method
  • Combine removal of fines
  • Easy to adjust/control energy level
  • Requires sophisticated Equipment (e.g.
    compressor)
  • Requires good understanding of aquifer conditions
  • Does not target specific screened zones

17
Jetting Pros
Cons
  • Most Efficient Method
  • Easy to adjust/control energy level
  • Easy to target specific screened zone
  • Enhance movement of particles deep into the
    aquifer.
  • Screens designed for jetting (V-wire)
  • Requires sophisticated Equipment (e.g.
    compressor)
  • Requires good understanding of aquifer conditions
  • Requires removal of fines

18
(No Transcript)
19
Wrap Up
  • Development is very important
  • Immmediately following well completion
  • As part of the maintenance of the well
  • Development is very complex and need to be
    designed properly to be efficient
Write a Comment
User Comments (0)
About PowerShow.com