Chemicals Guidance Document 3 Part 1 - PowerPoint PPT Presentation

1 / 56
About This Presentation
Title:

Chemicals Guidance Document 3 Part 1

Description:

Chemicals Guidance Document 3- Part 1 (Chemical Processes) ... substantiate and corroborate the planning and technological risk associated with ... – PowerPoint PPT presentation

Number of Views:56
Avg rating:3.0/5.0
Slides: 57
Provided by: dba87
Category:

less

Transcript and Presenter's Notes

Title: Chemicals Guidance Document 3 Part 1


1

Chemicals Guidance Document 3- Part 1 (Chemical
Processes) Basil Behnam, Matthew Parthun, Paul
Thomson, and Supriya SenGupta Chemicals
WorkshopsNovember 2004
2
Workshop Binder Contents
  • 1. Chemicals Guidance Document 1- Shop Floor
    SRED
  • 2. Chemicals Guidance Document 2- Qualifying Work
  • 3. Chemicals Guidance Document 3- Part 1
  • 4. Powerpoint presentations
  • 5. Case A - Fluidized Bed Development
  • 6. Case B - Organics Pretreatment Process
  • 7. Case C - Co-extrusion Process
  • 8. Workshop Evaluation

3
Chemical SRED Working Group Members
  • Chair Pesh Patel NOVA Chemicals Corporation
  • Members Supriya SenGupta NTSS,
    Chemicals/PulpPaper- CRA
  • Basil A. Behnam Rhodia Canada Inc.
  • Dennis Garratt RT Policy Coordinator
  • Darren Lawless Fielding Chemical Technologies
  • Mel Machado Manager FLA - CRA
  • David McKeagan Consultant, KPMG
  • Nancy ONeill Canadian Consumer Specialty
    Chemicals Ass.
  • Matthew Parthun H.L. Blachford Ltd.
  • Subhash Rai DuPont Canada Inc.
  • Maury Smith Dow Chemical Canada Inc.
  • Richard Steevensz Bayer Inc.
  • Paul Thomson Crompton Co.
  • Martin Vines NTSS, Plastics - CRA
  • Secretary Dave Shearing Canadian Chemical
    Producers' Assoc.

4
Chemicals SRED Joint Committee - Some
Stakeholders Involved
Chemical Industry Members
CRA
Chemicals Guidance Docs.
Industry Canada
CCPA
5
Chemicals Claims Key Locations
Edmonton
Calgary
Montreal
Sarnia
6
Agenda
  • I Background Discussion of EP and CP/ED
    (Supriya SenGupta)
  • II 3.1 Lubricants (Matthew Parthun)
  • III 3.2 Batch Process (Basil Behnam)
  • IV 3.3 Bioreactor (Paul Thomson)
  • V Summary (Supriya SenGupta)
  • VI QA
  • www.cra-arc.gc.ca/taxcredit/sred/publications/chem
    3/chem3-README.html

7
Definitions
  • ED experimental development
  • CP/ED experimental development commercial
    production
  • EP experimental development experimental
    production
  • CP commercial production only

8
Chemicals Guidance Doc. 3 Objectives
  • DETERMINE
  • If a project meets the definition of SRED
    (Chemicals Guidance 1)
  • Relevant work/expenditures that can be claimed
    (Chemicals Guidance 2) and
  • Identifying Claim for Experimental Production
    (EP) or Experimental Development with
    simultaneous Commercial Production (CP/ED).

9
Chemicals Guidance Doc. 3 Objectives
  • ASSUMPTIONS
  • There is sufficient information in the project
    description to determine eligibility.
  • All operational, health and safety, and/or
    environmental guidelines may not have been fully
    considered.
  • All work claimed is carried out in Canada.

10
Plant Trials
  • ED projects may include
  • Plant trial(s) where there is ED involving EP.
  • In this case no segregation of work and costs is
    required for the purposes of the SRED claim with
    respect to the required EP.
  • Plant trial(s) where there is ED involving
    commercial production (CP/ED).
  • In this case, the claimant must identify and
    allocate all of the ED-related work.

11
Process to Determine EP or CP/ED
  • 1. Technological Problem Defined
  • 2. Define Project Scope Plant Trials
  • 3. Is there a SRED Project?
  • Y/N - Subsection 248(1) or check for 3
    criteria
  • 4. Is trial commensurate with needs of ED?
  • 5. Excluded commercial work?
  • 6. Check EP technical considerations (Table 1)
  • 7. Determine if trial is EP or CP/ED
  • 8. Repeat for total number of trials

12
Development
Experience
Intuition
  • Technological Problem Defined

General knowledge
Creative genius
Commercial needs
Problems or Malfunctions
Standards
13
Development
  • Technological Problem Defined

Define Project Scope Plant Trials
14
Development
Technological Problem Defined
Define Project Scope Plant Trials
SRED Project? Check 3 critera
15
Development
Technological Problem Defined
Define Project Scope Plant Trials
SRED Project?
  • Trial commensurate with needs?

16
Development
Technological Problem Defined
Define Project Scope Plant Trials
SRED Project?
Trial commensurate with needs?
Excluded commercial work?
17
Development
Technological Problem Defined
Define Project Scope Plant Trials
SRED Project?
Trial commensurate with needs?
Excluded commercial work?
EP technical considerations?
18
Development
Technological Problem Defined
Define Project Scope Plant Trials
SRED Project?
Trial commensurate with needs?
Excluded commercial work?
EP technical considerations?
  • Determine if trial is EP or CP/ED

Focus
19
Development
Technological Problem Defined
Define Project Scope Plant Trials
SRED Project?
Trial commensurate with needs?
Excluded commercial work?
EP technical considerations?
  • Determine if trial is EP or CP/ED

Focus
20
Development
Development
Technological Problem Defined
Define Project Scope Plant Trials
SRED Project?
Trial commensurate with needs?
Repeat
Excluded commercial work?
for Number of trials
EP technical considerations?
  • Determine if trial is EP or CP/ED

21
Development
Technological Problem Defined
Define Project Scope Plant Trials
SRED Project?
)
Identify research questions (S/T Uncertainty
Hypothesize answers (S/T Advancements)
Trial commensurate with needs?
Plan conduct experiments (ST Content)
Excluded commercial work?
EP technical considerations?
Prepare SRED Claim
  • Determine if trial is EP or CP/ED

22
Notes on Plant Trials
  • There may be a combination of different types of
    ED plant trials, some of which involve EP, while
    others involve CP/ED.
  • List of technical factors in Table 1 must not be
    used on a "check-list" basis, and none of the
    technical indicators, in isolation, is
    determinative.
  • Final assessment of whether the ED project
    involves EP or CP/ED must be made after reviewing
    all of the facts of the case.

23
Some Types of Evidence for EP
  • Evidence that staff were involved in designing
    specific experiments and monitoring and analysing
    test data from the ED project.
  • Evidence of meetings or other relevant sources of
    supporting information were available to
    substantiate and corroborate the planning and
    technological risk associated with the ED
    project.
  • Evidence of experimental operating instructions
    and other consistent records were prepared for
    the ED project.
  • Evidence of specific monitoring strategies and
    operating instructions for the ED project were
    communicated to the operating staff.
  • Evidence of special tracking, classification or
    recognition of the project/product.

24
Chemical Sector Examples in Doc. 3
  • Example 3.1 Development of New Lubricants
  • (Batch Example - EP)
  • Example 3.2 Processing of Product Z
  • (Batch Example - EP and CP/ED)
  • Example 3.3 Bio-treatment of Wastewater
  • (Continuous Example - ED in commercial use)

25
T661 Form Requires
  • A. Scientific/Technological Objectives
  • B. Technology or Knowledge Base Level
  • C. Scientific/Technological Advancement
  • D. Description of Work/Activities in This Tax
    Year
  • E. Supporting Information

26
Chemicals Guidance Document 3 - Part 1
(Additional Fields for Guidance 3)
  • Background Information
  • Business Objectives
  • Scientific/Technological Objectives
  • Technology or Knowledge Base Level
  • Scientific/Technological Advancement
  • Description of Work/Activities in This Tax Year
  • Supporting Information
  • Analysis of Project
  • Claim (including List of Personnel)

27
Chemicals Guidance Document 3 - Part 1
(Additional Fields for Guidance 3)
  • Background Information
  • (Context of the project)
  • Business Objectives
  • (Companys rationale for Project)
  • T661 Form
  • (Required fields)
  • Analysis of Project
  • (Provides the rationale for why the project meets
    the definition of SRED)
  • Claim (including List of Personnel)
  • (Determination is made if the ED project involves
    EP or CP/ED)

28
Agenda
  • I Background Discussion of EP and CP/ED
    (Supriya SenGupta)
  • II 3.1 Lubricants (Matthew Parthun)
  • III 3.2 Batch Process (Basil Behnam)
  • IV 3.3 Bioreactor (Paul Thomson)
  • V Summary (Supriya SenGupta)
  • VI QA

29
Example 3.1Development Of New Forming Lubricants
- Issues Addressed
  • Claim for EP
  • Materials consumed
  • Product trials at customer
  • Disposal Costs (not claimed)
  • Proxy Method
  • Contract Costs

30
Example 3.1Development Of New Forming Lubricants
- Technological Objectives
  • Determine whether newly developed lubricant
    formulation could
  • provide the required lubrication to form heavy
    gauge metal parts on a variety of metal forming
    presses, such that there would be no breakage of
    the formed metal parts.
  • Be environmentally benign, have good spray and
    wetting characteristics, and have sufficient
    boundary lubrication strength.

31
Example 3.1Development Of New Forming Lubricants
- Technological Knowledge Base
  • ABC was knowledgeable on types of lubricants used
    in metal forming.
  • ABC had expertise in the development and testing
    of new formulations and an up-to date library of
    recent published developments in the field.
  • Previous work at ABC to develop lubricants for
    combined performance and reduced toxicity had
    been unsuccessful.

32
Example 3.1Development Of New Forming Lubricants
- Technological Advancement
  • ABC sought to develop a new and enhanced
    lubricant with physical properties that could not
    be met with other existing lubricant
    formulations.
  • ABC sought to gain an improved understanding of
    the role of enhanced additives for use in
    industrial forming compounds.

33
Example 3.1Development Of New Forming Lubricants
- Work Done
  • New lubricant laboratory development at ABC -Work
    done prior to 2 Field Trials at XYZ (Feb
    2002-April 2002)
  • Field Trial 1 at XYZ (May 2002)
  • Analysis of Results and modification of
    formulation, (June-Sept 2002.)
  • Field Trial 2 at XYZ (October 2002)

34
Example 3.1Development Of New Forming Lubricants
- Analysis of Project
  • Work was carried out to develop a new enhanced
    lubricant that could be used for the manufacture
    of formed metal parts.
  • 2 Field trials were needed to overcome several
    technological uncertainties, such as the changes
    in the spray and the wetting characteristics of
    the lubricant.
  • Project meets the definition of SRED.
  • Since simultaneous commercial work, claim is for
    EP.

35
Example 3.1Development Of New Forming Lubricants
- Expenditures
  • Table 2 Overall Expenditures Summary
  • Total Labour Cost 17,100.00
  • Material (7500 gallon 2/gallon) 15,000.00
  • Capital 0.00
  • Contract Lab Analysis 5,000.00
  • PPA labour.65 11,115.00
  • Total Claimed (including PPA) 48,215.00

36
Agenda
  • I Background Discussion of EP and CP/ED
    (Supriya SenGupta)
  • II 3.1 Lubricants (Matthew Parthun)
  • III 3.2 Batch Process (Basil Behnam)
  • IV 3.3 Bioreactor (Paul Thomson)
  • V Summary (Supriya SenGupta)
  • VI QA

37
Example 3.2 Batch Processing of Product Z with
Novel Catalyst - Issues Addressed
  • Claim for EP and CP/ED
  • Capital
  • Materials consumed and Materials transformed.
  • Recapture / materials transformed.
  • Modeling
  • Reproducibility and repeatability
  • Disposal Costs (not claimed)
  • Proxy Method

38
Example 3.2 Batch Processing of Product Z with
Novel Catalyst - Technological Objectives
  • Develop full-scale chemical manufacturing process
    to produce new product Z.
  • Determine optimum process conditions to minimize
    by-product Y, minimize reversion, maximize yield
    of product Z.
  • Understand mass transfer/kinetics.
  • Determine optimal design configuration for
    efficient impeller design.

39
Example 3.2 Batch Processing of Product Z with
Novel Catalyst - Technology Knowledge Base
  • The company had developed a new catalyst for a
    batch process from earlier lab-scale studies,
    claimed in a prior tax year.
  • Laboratory trials had produced up to 100 L of
    Product Z, but there was no operating experience
    with use of the newly developed catalyst for the
    present large-scale (50,000 L) application
    (5001 scale-up factor).

40
Example 3.2 Batch Processing of Product Z with
Novel Catalyst - Technological Advancement
  • Specifically, the company sought to develop
  • large-scale batch manufacturing process for a
    multi-phase catalysis application
  • chemical process to maximize product yield and
    minimize reaction by-products and chemical
    reversion
  • semi-empirical mathematical model to simulate the
    large-scale and complex multi-phase catalytic
    process, based upon a combination of theoretical
    principles and data from the experimental trials.

41
Example 3.2 Batch Processing of Product Z with
Novel Catalyst - Work Done
  • March 2002 - Design of Experimental Plan
  • May 2002 - Trials 1, 2
  • Trial 1 Removing Mass Transfer Limitations
  • Trial 2 Steepest Ascent Yield Maximum
    Determination
  • June 2002 -Trials 3-5
  • Reliability and Repeatability Of Process Data
    Study
  • July 2002- Mathematical Modeling
  • August 2002 Impeller Study
  • September 2002- Trials 9, 10
  • Reliability and Reproducibility of Impeller Data

42
Example 3.2 Batch Processing of Product Z with
Novel Catalyst - Analysis of Project
  • Project involved the plant-scale development of a
    new multi-phase catalytic chemical process.
  • Multiple trials were needed to develop a
    completely new process with an unproven catalyst
    technology.
  • Project meets the definition of SRED.
  • Mix of CP/ED and EP trials.

43
Example 3.2 Batch Processing of Product Z with
Novel Catalyst- Trials 1-10 Expenditures
Trials 1-2 (EP) Labor 27,840.00
Material consumed/transformed 374,164.00
(see next slide for details) Capital
0.00 Trials 3-5(EP) Labor
41,760 Material consumed/transformed 0.00
(product sold) Capital 0.00 Trials 6-10
(CP/ED) Labor 75255 Material
consumed/transformed 0.00 (product
sold) Capital 160,000
44
Example 3.2 Batch Processing of Product Z with
Novel Catalyst - Expenditures
EP TRIALS 1-2 MATERIAL /KG TOTAL
A 7 2160007 224,000 B 3 2250003
150,000 CATALYST 20 24.120 164 TOTAL
MATERIAL 374,164
45
Example 3.2 Batch Processing of Product Z with
Novel Catalyst - Total Expenditures
TRIAL TYPE CLAIM () PPA () 1-2 EP 402,004
18,096 3-5 EP 41,760 27,144 6-10 CP/ED
235,255 48,916 1-10 5 EP 679,019 94,156
5 CP/ED Total Claim, including PPA (Trials
1-10) 679,019 94,156 773,175
46
Agenda
  • I Background Discussion of EP and CP/ED
    (Supriya SenGupta)
  • II 3.1 Lubricants (Matthew Parthun)
  • III 3.2 Batch Process (Basil Behnam)
  • IV 3.3 Bioreactor (Paul Thomson)
  • V Summary (Supriya SenGupta)
  • VI QA

47
Example 3.3 Bio-treatment of Wastewater - Issues
Addressed
  • Claim for ED (in simultaneous commercial use)
  • Capital
  • Materials consumed
  • Modeling
  • Reproducibility and repeatability
  • Proxy Method
  • Contract Costs

48
Example 3.3 Bio-treatment of Wastewater -
Technological Objectives
  • Objective was to determine the appropriate flow
    rates of oxygen (350 - 500 litres/min) and
    influent (100 - 150 litres/min.) required to
    maximize the rate of organic contaminant removal
    in the bio-reactor unit, while monitoring the
    effects of normal variations in operating
    conditions (pH, temperature, waste stream
    composition) on the system.

49
Example 3.3 Bio-treatment of Wastewater -
Technological Knowledge Base
  • Company gained significant knowledge about
    treating typical waste streams after several
    years of operation of a biological wastewater
    treatment system.
  • Companys engineers have shown their
    understanding by reducing DOC levels in the
    process wastewater by up to 50.
  • However, much is unknown about the effect of
    operating conditions such as rates and type of
    oxygen feed.

50
Example 3.3 Bio-treatment of Wastewater -
Technological Advancement
  • Company sought to advance the waste bio-treatment
    process by replacing the low-pressure air feed
    with oxygen.
  • Company sought to advance existing technology by
    modeling the system to provide a predictive tool
    for evaluating most efficient bio-treatment
    system operation.

51
Example 3.3 Bio-treatment of Wastewater - Work
Done
  • Installation of oxygen - (Aug. 2002)
  • Optimization of oxygen supply and influent rate
    (Sept. Nov. 2002)
  • Analysis of Results - (Nov. 2002)
  • Verification of Model - (Nov. 2002 )

52
Example 3.3 Bio-treatment of Wastewater -
Analysis
  • Experiments carried out on continuous bioreactor
    currently in operation at the companys
    wastewater treatment facility.
  • Work was also done to generate a reliable
    mathematical model of the process to optimize
    operating parameters, which was in support of the
    ED.
  • Project meets the requirements for SRED
  • Claim is for ED with simultaneous commercial use
    (all SRED expenditures need to be allocated)

53
Example 3.3 Bio-treatment of Wastewater -
Expenditures
  • Labour 23,775
  • Material consumed (Oxygen) 3,500
  • Contract Chemical Analysis 15,000
  • Capital 16,000
  • Total Claimed, excluding PPA 58,275
  • PPA 15,454
  • Total (including PPA) 73,729

54
Agenda
  • I Background Discussion of EP and CP/ED
    (Supriya SenGupta)
  • II 3.1 Lubricants (Matthew Parthun)
  • III 3.2 Batch Process (Basil Behnam)
  • IV 3.3 Bioreactor (Paul Thomson)
  • V Summary (Supriya SenGupta)
  • VI QA

55
Chemicals Guidance Document 3 - Chemical
Processes
56
Q A SESSION
  • www.cra-arc.gc.ca/taxcredit/sred/publications/chem
    3/chem3-README.html
Write a Comment
User Comments (0)
About PowerShow.com