How To Change Toner In Brother Printer? [A Step-by-Step Guide]

1
How To Change Toner In Brother Printer? A
Step-by-Step Guide
? 12 Dec, 2023 ? 2 Like
2
How To Change Toner In Brother Printer?
A Step-by-Step Guide
Do you know how to change toner in Brother
printer? If not, dont worry! Through this blog,
I will explain to you the step-by-step instruction
s for changing toner in Brother printer. Before
that, I will explain the main purpose of using a
toner in the Brother printer. The toner is
nothing but a fine powder that is used by laser
printers to create ink on paper. In simpler
terms, these powered materials are combined with
bonding agents. Whenever this material is exposed
to UV light, bonding agents stick to the paper
surfaces. However, the main source of this UV
light is an electronic laser beam inside the
laser printer.
Besides, in this blog, I will cover how Brother
toners are different from other brands. Next, I
will tell you the best toner that you can use
and, finally, introduce you to the toner
replacement process.
3
How is Brother Toner Different From Other Toners?
Like Brother printers, HP doesnt use a separate
toner cartridge, which is attached to the drum.
In comparison, HP provides the toner and drum in
a single unit. Also, the Brother toner cartridge
is located in a plastic tray to which a drum is
attached, also called a drum unit assembly.
Despite this, Brother sells the drum units
separately from Brother toner cartridges.
However, the drum unit is also required to be
replaced when needed.
You should also note that the other brands toner
cartridges are not compatible with another
brands printer. In simpler terms, you cant use
Brothers toner cartridge in an HP printer. Due
to this, I cant pinpoint which one is better
than the others. Every toner cartridge
is compatible with its own brands of printers,
and it works great when used with compatible
printers.
4
In a nutshell, people highly prefer Brother toner
as it is affordable, reliable, and provides
top-notch quality.
Which Toner Should You Use?
I know you are eager to learn how to change toner
in Brother
printer. But before that, you will need to know
which toners are good for your printer. In order
to make it easier for you, Brother laser printers
already have the list of the toner cartridges.
You can find this list on a sticker inside and
the back of the printers access panel.
In addition to toner, the best toner cartridge
for your Brother monochrome laser printers is the
TN730.
On the other hand, you can also use the TN760,
which is a high-yield counterpart of TN730.
Above all, there are multiple toners available
based on the monochrome laser printers model.
5
How to Change Toner in Brother Printer?
In this section, I will focus on the procedure to
change the toner in the
Brother printer. For this, you will need to open
up the Brother laser printer. Let me show you how
do I change the toner in my Brother printer
Step 1 Open the Access Panel
1. First of all, you need to open the front
access panel.
2. Then, you will see a green handle. Hold it to
pull out the drum assembly unit from the printer.
Step 2 Remove the Drum Assembly Unit
Here, you have to press the green clips to remove
the toner cartridge.
These clips are located at the side of the drum
assembly unit. Refer to the image below
Step 3 Remove the Empty Toner Cartridge
6
Now, you have to unpack the new toner cartridge
replacement and shake it gently back and forth.
It will help the toner to distribute evenly
inside the cartridge.
Step 4 Insert a New Toner Cartridge
Now, insert the new toner into the drum assembly
unit. Please note
that the drum location is on the back, and the
toner tank is placed near the front.
After that, you have to slide the green corona
tab located at the top of the drum unit in the
backward and forward directions. In addition,
the corona tab will clean the photosensitive drum
head. As a result, it will prepare for the new
toner cartridge.
Now, slide the drum assembly unit back into your
Brother printer until it fits into its place.
7
Finally, you have to close the front access
panel, as shown in the picture below.
Step 5 Perform the Print Test
Now, your printer may undergo a few diagnostic
tests. Afterward, your
printer will be ready to print all sorts of
documents.
Final Thought
In a nutshell, you should only use Brothers
toner cartridge in the
Brother printer. Despite this, there are several
compatible toners for your Brother printers, and
I have mentioned the best toner for your printing
needs. In addition, I have discussed how to
change toner in Brother printer. You should be
careful while opening and removing any parts from
the Brother printer. In other words, perform each
step carefully and gently to avoid any damage.
Frequently Asked Questions(FAQs)
8
Question 1 How Do I Change The Toner In
My Brother Printer?
Answer To change the toner cartridge in the
Brother printer, you
have to follow these steps below
1. First, switch on the Brother printer. 2. Then,
open the access panel.
3. Now, you will see a green lever open it. 4.
After that, pull the drum unit assembly out from
the Brother printer.
5. Unbox the new toner cartridge.
6. Now, place the new toner cartridge into the
drum unit. 7. Slide the green corona tab forward
and backward for at least three minutes.
8. Finally, close the front access panel.
Question 2 When Can I Replace My Brother Toner?
9
Answer You will have to replace the toner when
the printing color starts fading and becomes
lighter or streaky. The toner will start reducing
its print quality when the toner level reaches up
to 10. Hence, you need to keep a close eye on
your printed pages to check those light print
jobs, indicating the right time to replace the
toner. Since Brother toner is expensive, you
should only buy it when it is completely empty.
Question 3 Can I Refill My Toner Cartridge
In The Brother Printer?
Answer Yes, it is possible to refill the Brother
toner cartridge using the Uni-Kit toner refill
kit. You can buy them for 50, 60, and
100. However, refilling is pretty easy. In other
words, you have to attach the pouring funnel
after opening the bottle cap. Then, expose the
filling port on the side of the cartridge. Before
filling, you have to loosen the cap attached to
the side of the cartridge. Loosen it using a
flatbed screwdriver. Then, pour the toner into
your cartridges.
10
Visit-
https//theyourtechexpert.com/how-to-change-toner-
in-brother-print er-a-step-by-step-guide