Trusted acoustic consultants in the Saudi Arabia (1)

1
5 SIMPLE WAYS TO IMPROVE ROOM ACOUSTICS
2
Room acoustics is the study of how sound behaves
in enclosed or partially enclosed rooms. As a
discipline, the study and analysis of direct and
reflected sound are part of room acoustics. You
frequently don't notice if a space has decent
acoustics since you anticipate being able to hear
well without too much echo or reverberation of
sound. You typically become aware of poor
acoustics soon after entering a room. An
acoustical consultant suggest you the best
possible solutions for your room.
5 Simples ways to improve Room acoustics
1. Decouple the Walls Firstly consider decoupling
the walls is done in different ways. The best and
most efficient method is to use a double wall
system, which calls for the construction of an
additional wall using two-by-fours of the same
standard and steel studs. A few inches should
separate this wall from the old foundational
wall. The higher the wall, the better.
DSP Consultants Acoustical consultant
3

• 2. Add a floating ceiling
• The next step would be to install a floating
  ceiling. This will further soundproof the room by
  lowering the ceiling, which completes the
  decoupling process.
• New ceiling joists must be woven between the
  original joists to create a floating ceiling.
  Place these new joists 12 inches lower than the
  ceiling than before. These joists help to isolate
  the space and block off some frequencies.
• 3. Insulate
• One of the most traditional yet most effective
  ways of soundproofing is insulation. Though the
  pink insulation you typically picture doesn't
  offer as much sound attenuation as other ways, it
  can still be a valuable soundproofing tool when
  used properly and in conjunction with other sound
  absorption strategies. Installing too much
  material is a common mistake individuals make
  while installing insulation. A soundproofed
  room's air can become overly dry if there is too
  much insulation added to the area. This also
  increases the temperature of the room.

DSP Consultants Acoustical consultant
4
4. Install drywall The installation of drywall on
the freshly constructed decoupled walls and
floating ceiling is one of the final phases in
soundproofing a room inside a room. Adding
drywall to the building increases its mass
because heavier items absorb sound waves better
than lighter ones. Drywall works especially well
in a disconnected system.   5. Fill in the air
gaps Check your room's walls and ceiling for any
potential holes or cracks to make sure sound
cannot enter or leave the space. Any cracks you
find, fill in. The easiest technique to seal
cracks and holes is to use foam gaskets or
acoustical caulk. Although air gaps may seem
small, they can make the difference between a
room that is entirely soundproof and one that is
simply unsound proofed.
DSP Consultants Acoustical consultant
5

• Depending on elements like the size of the room,
  the quantity of panels installed, and the overall
  level of insulation in the area, the effect of
  acoustic panels on room temperature may vary. Due
  to their insulating qualities, acoustic panels
  may occasionally cause a slight rise in ambient
  temperature. Even this small technique, when not
  done in a proper manner, will affect the entire
  feel of the room, so doing it in a professional
  way is also important. For that reason, it is
  better to seek advice from an Acoustical
  consultant, who can suggest appropriate measures
  properly calculated and estimated to meet your
  requirements.

DSP Consultants Acoustical consultant
6
Contact DSP Consultants for more information
Location Maktoum Road, Golden Business Centre,
Offices 203-204 Dubai UAE Email
info_at_dsp-consultants.com Website
https//dsp-consultants.com/sa/acoustic-consultant
s-saudi-arabia/ Contact 971 4 295 8013