Best Way for Waterproofing an Old Concrete Roof

1
Best Way for Waterproofing an Old Concrete Roof
2022 - 2023
2
Best Way for Waterproofing an Old Concrete Roof
Old concrete roof, terraces and driveways are
always prone to water damage. The best way to
waterproofing solutions an old concrete
roof/terrace depends upon the surface conditions
and the age of the structure/roof. The best
option which is Polyurethane Coating. The
procedure involves surface preparation with wire
brushing followed by cleaning and filling the
exposed cracks with elastomeric material. Then
priming the surface for better adhesion of the PU
coating. Then apply the coating using
brush/roller/spray in two coats. Ponding tests
can be done to ensure zero water leakage.
Although this system is little expensive but for
achieving long term results and durability this
Best waterproofing company can installed. The
best way of waterproofing an old concrete roof is
by using the concrete shingles that are made with
a single layer of shingle. These shingles are
available in various colors and can be installed
easily without any problem. The installation
process of these shingles is very easy because
they do not require special tools or equipment to
install them on your roof. The main advantage of
using this type of shingle is that they are
durable and long lasting, which means that you
can use them for years without needing to replace
them.
3
After constructing a concrete roof you have to
ensure that, your concrete roof is waterproof. By
using the water leakage solution in Delhi system.
Waterproofing is a process by which you can save
your roof from damage and also save the internal
materials of your house. The best way to
waterproof an old concrete roof is by using good
quality materials and following the instructions
carefully. At first, we have to do a preliminary
survey of the old roof and note down the
conditions of the roof. We can use a torch lamp
to look at the substrate surface and see if there
are any cracks or holes in it. If there are any
cracks then you should make sure that they are
sealed properly before proceeding to next step.
4
Then we have to clean up the surface of your roof
with a brush and water. It will help us remove
dirt and debris from your surface so that it can
be easier for us to install primer coat on it.
After cleaning up your surface, apply primer coat
on top of it using brush or roller which will
make sure that all cracks or holes are filled up
properly and allow us for applying waterproofing
membrane over them without any problem. Now
apply waterproofing membrane over entire surface
using trowel which will provide protection from
water leakage issues during heavy rainfall or
snowfall seasons when it becomes really difficult
for everyone living nearby due to lack of proper
drainage system installed by their respective
owners/ managers/ developers who are responsible
for maintaining such systems but fail miserably
due. Another way is after concrete admixture
manufacturers the concrete roof, APC sheet can be
installed over it. This will also make it
waterproof, but it will be more expensive than
using admixture because you'll need additional
materials like APC sheet and more labor costs
when installing it on top of the existing
concrete slab that makes up your roof's surface
area.