Maintenance - PowerPoint PPT Presentation

About This Presentation
Title:

Maintenance

Description:

Preventive, corrective maintenance – PowerPoint PPT presentation

Number of Views:6
Slides: 45
Provided by: Atimullah
Category: Other
Tags:

less

Transcript and Presenter's Notes

Title: Maintenance


1
GARAGE FLOW CHART MAINTENANCE PROCEDURE SYSTEM
Maintenance Procedure system
Preventive maintenance
Corrective maintenance
Yes
Corrective maintenance ?
No
Inspection check list
Daily check list
Service repair request
Service repair request
Job card open
Job card open
Materials Request
  • Final Inspection Done?

No
No
Yes
Corrective maintenance data recorded and job card
closed
Delivery note
2
Mr. Eid Al OwaidDeputy Managing Director
Eng. Rashed Al-Mejaibel CM-HSE
s
h
e
WORK MANAGEMENT FLOW CHART
Eng. Abdulla ZahranWorkshop ManagerMasaha
Equipment Co. W.L.L.
HSE
QA / QC
Workshop Division
Administration
Invoice
Eng. Qasim Equipment Department
Eng. Samad
Eng. Mansoor Munawar Mechanical Department
Mr. Anil
Job Card
Abdul Rahman
Mr. Atimullah
All Fleets
Oil Service
Customer Service
Construction Equipment
Diesel Generator
Mobile Crane
Petrol Work
Tyre Section
Eng. Tahir
Mr. Mansoor
Mr. Safik
Mr. Jamal
Painting
Welding
Denting
Vehicle Maintenance
Eng. Abdulla Al Nassar
Eng. Mansoor
Eng. Fawad
Eng. Abdulla
Eng. Abdulla Mohammed
Mr. Husain
3
Corrective maintenance rectifies and repairs
defective systems in the equipment. Its purpose
is to restore systems that are faulty and could
be affecting important aspects of the vehicle,
such as performance or safety. Corrective repairs
require pre-planning and a logbook of outstanding
work orders.
  • Corrective maintenance

Features of corrective maintenance
  • Reduce emergency maintenance orders
  • Increases employee safety
  • Reduces service interruptions
  • Extending asset life

4
Service Repair Request
  • 1. Fail Repair - Restoring a failed asset to an
    operational state
  • 2. Overhaul  Fully restoring an asset to its
    service state as outlined by maintenance
    standards
  • 3. Salvage  Disposing of parts that cannot be
    repaired and replacing them with salvaged parts
    from unrepairable assets
  • 4. Servicing  Final fixes following larger
    corrective actions
  • 5. Rebuild  Disassembling parts and replacing
    worn components in line with original standards
    and specifications

5
Responsibility of Service Repair Request
Write a Comment
User Comments (0)
About PowerShow.com