444 (1)

1
HÖRMANN PERIMETER PROTECTION SYSTEMS CUSTOMIZATIO
NS
2
RGB with traffic light function

• RGB LED with traffic light status function for
  fixed and semi-automatic bollards in combination
  with automatic bollards
• AUTOMATIC BOLLARD LOW POSITION GREEN LED STEADY
  LIGHT
• AUTOMATIC BOLLARD HIGH POSITION RED LED STEADY
  LIGHT
• AUTOMATIC BOLLARD IN MOVEMENT FLASHING RED LED

• Power circuit for semi-automatic and fixed
  bollards
• In case the bollard is equipped with fitted
  flashing light

3
Cylinder customizations

• Possibility of different cylinder finishes
• Sandblasting
• Galvanizing

Customization with 4 reflective strips
Stone cover
Inclined head
4
Heads with RAL on request

• Available for aluminum heads
• Matchable with the RAL requested for the cylinder

5
Customized colums (Ø 170-275)

• Different heights
• Possibility of realization in AISI 316
• Additional door on column 275-1800
• customer components installation

Additional back door
Example of customization with camera
6
Customized colums

• Customized projects
• 275-2000mm single-sided column, with one command
  and one RFID reader

Example of technical drawing
7
Alternative foundation boxes

• Internal stainless steel foundation box A275/M30
  900E

8
Armored control box

• Special customization for higher protection

9
HAC potential

• Possibility of additional error signals
• Example
• Dive pump alarm signal via HAC. The pump is
  equipped with a probe that is used to control the
  start / stop of the pump when the water is in the
  foundation box.
• With the signal to control the start / stop of
  the pump when the water is in the foundation box,
  plus a relay, it is possible to connect to the
  free input of the SSP7. If the probe remains on
  for more than 15 minutes, the online control
  issues an alarm.

10
Lightning and surge protection module (Arrester)

• Purpose to protect the control unit from
  electrical peaks and overvoltages that could
  cause damage to system components
• Installation for surge protection according to
  VDE 0100-443 (IEC 60364-4-44)
• Discharge capacity up to 40 kA (8/20) per pole
  through high performance varistors
• Modular limiter with removable cartridge complete
  with disconnection and visual status indicator
• Snap-in connection with vibration protection
• Possibility of auxiliary contact in
  potential-free changeover for the emote fault
  signaling