Things to Keep in Mind While Cleaning your ACP Panel

1
THINGS TO KEEP IN MIND WHILE CLEANING YOUR ACP
PANEL
2
Introduction
ACP or Aluminium Composite Panels are flat
leveled panels that are composed of two thin
sheets of aluminium coating and a polyethylene
core. The ACP panels are known for their diverse
application in interiors, exteriors of
architectural buildings, and signboards. Among
their many uses, aluminium composite panels are
frequently used to cover pillars and false
ceilings.
3
Here are 5 points you should pay more attention
to while cleaning your ACP panels.

1. Be gentle
2. Clean soil, dirt, and sand
3. Clean impurities
4. Time selection
5. Selection of proper cleaning agent

4
Here are 5 points you should pay more attention
to while cleaning your ACP panels.
Be gentle- Recall that ACP panels are not
scratch-resistant. Even though the aluminium
composite panels have a durable exterior, it is
advised to clean them gently. Using aggressive
cleaning agents on the surface of the panels is
not recommended. he panels may be cleaned and
dusted off with just water and regular
detergent. Clean soil, dirt, and sand- Cleaning
the ACP sheets in industrial buildings that are
situated in more dust-prone areas requires extra
caution. To prevent scratches, it is advised to
use a forceful flushing technique on ACP sheets
from a higher surface level to the lower surface
level. It is suggested to clean the panels with a
mild detergent if they look to be blackened.
5
Here are 5 points you should pay more attention
to while cleaning your ACP panels.

1. Clean impurities- The ACP panels' natural colour
   and sheen are being worn away by impurities and
   pollution. The bright appearance of the panel can
   be preserved by using cleaning solutions and
   detergents. To prevent drips and water stains, it
   is best to wipe the aluminium composite panels
   from higher to lower surface levels.
2. Time selection- The choice of the cleaning period
   for the ACP panels is crucial. The aluminium used
   to make the ACP panels, like other metals,
   expands and shrinks in response to changes in
   temperature. Therefore, picking a time of day to
   clean the panels is crucial. Cleaning ACP panels
   early in the day or late at night will minimise
   expansion and contraction. When possible, avoid
   cleaning your panels in the height of the day,
   whether it's summer or winter.
3. Selection of proper cleaning agent- Using a
   powerful cleaner to clean the planes may do more
   harm than good to the panels. When choosing a
   cleaning product, specific considerations such
   the Ph level and toxins must be made. Before
   using the cleaning chemical on the full ACP
   panel, it is suggested that you patch test it on
   a small portion of the panel.

6
Conclusion
You must be mindful of the ACP panels' dos and
don'ts when cleaning them. Because the ACP panels
are lacquered and can be damaged on the surface,
cleaning agents like vinegar, caustic soda, or
potassium hydroxide must never be used on them.
Additionally, if the building is still in
progress, I advise you to keep the panels covered
because it is difficult to remove machine grease,
cement, and sealants from the surface of
aluminium composite panels.
7
Thank you