Servo Planetary Gearbox | SMD Gearbox

1
Servo Planetary Gearbox

• HIGH PRECISION SERVO GEARBOX

www.smdgearbox.com
2
What is Servo Motor ?

• A servo motor  is a rotary actuator or linear
  actuator that allows for precise control of
  angular or linear position, velocity and
  acceleration. It consists of a suitable motor
  coupled to a sensor for position feedback.
• A servo motor is basically DC motor enriched
  with decoder and driver to control its motions
  for a particular angle. Decoder passes the
  instructions to driver to control the motor speed
  or motion and driver act accordingly.
• As servo motor could not manage its speed by
  itself the servo gearbox came into picture. Servo
  motors are used in applications where the motor
  needs to be stopped at a particular angle or
  position to reach desired output.
• The best example for this is for ceiling fan DC
  motors are used where they dont want to stop it
  on particular angle whereas the bottle filling
  application uses servo motor to manage or stop
  its motion for a particular angle.

www.smdgearbox.com
3
Why Servo Gearbox ??

• The servo motors are consist of encoder and
  driver to control its speed and motion. Servo
  gearbox is used to retrieve the accurate or high
  precision output from the application. Sometimes
  application needs to stop at particular angle
  very accurately servo gearbox controls that
  accuracy in application with its mesh. The meshes
  stops the motor and reduce the backlash rate to
  its minimum level so that the accuracy can be
  achieved.
• In short servo gearbox takes the input from motor
  and transmits the precisely calculated output to
  the application. Resulting the accuracy in
  application can be achieved. Servo gearbox is
  nothing but the combination of different gear
  trains.
• The most important advantage of using a gearbox
  in a servo system is the effect it has on the
  inertia of the load. The load inertia, which is
  reflected on the motor, is reduced by the square
  of the gear ratio. Therefore, even a relatively
  small gear reduction can have a significant
  effect on the inertia ratio.

4
Servo Planetary Gearbox

• Servo planetary gearbox also known as inline or
  epicyclic gear. Planetary gear is a combination
  of two gears mounted on each other to revolve
  centre of one gear around the centre of other. It
  is called planetary because of its mechanism. The
  sun gear rotates to and because of its rotation
  other gears gets the motion and starts rotating.
  The sun gear passes the power to planetary gears
  which also rotates and passes the power to each
  other.
• SMD Gearbox introduced vide range of planetary
  gearbox with different ratios ranging from 13 to
  1100. They have different frame sizes too. You
  can get the details of frame sizes from our
  catalogue.
• SMDs planetary gearbox comes with shaft end,
  flange end and with right angled output.

5
OUR PRODUCTS
Planetary Gearbox with Shaft End
Planetary Gearbox with Flange End
Right Angle Gearbox
6
Applications of Servo Planetary Gearbox
7
CONTACT US
HEAD QUARTER SEIMITSU MOTION DRIVES CO. LTD.
(Taiwan) No. 339, Taishun Rd., Taiping Dist.,
Taichung City, Taiwan  Mobile No
886(09)67388376 Mail ID sales_at_smdgearbox.com
HEAD OFFICE (OVERSEAS) SEIMITSU MOTION DRIVES CO.
LTD. (Taiwan) A - 51, H Block, MIDC, Pimpri -
Chinchwad, Pune 411018, MH, India.  Mobile No
 91 7030669818 Mail ID   sales_at_smdgearbox.com
Follow us on