Plantation Shutters Installation - PowerPoint PPT Presentation

About This Presentation
Title:

Plantation Shutters Installation

Description:

Plantation Shutters Orlando FL are a fantastic way to give your property a luxurious feel. One of the first tasks in installing your shutters is to accurately measure the windows for which they will be used. – PowerPoint PPT presentation

Number of Views:6

less

Transcript and Presenter's Notes

Title: Plantation Shutters Installation


1
Plantation Shutters Installation
  • Bridge Mill Shutters

2
How to Measure for Plantation Shutters
  • Plantation Shutters Orlando FL are a fantastic
    way to give your property a luxurious feel. One
    of the first tasks in installing your shutters is
    to accurately measure the windows for which they
    will be used. Keep in mind whether the shutters
    will be installed on the inside or outside of the
    window frame as you go through the processes.

3
Establishing the Window Squareness
  • Each side of your window should be measured
    slantwise. Your window is out of four-sided
    figures if the diagonal measurements are
    different. If the difference is less than a
    quarter of an inch, you should be fine
    nevertheless, anything between 14 and 12 inches
    is well thought-out of a four-sided figure, and
    anything beyond 12 inches is measured to a large
    amount out of square.

4
Inside Mounting Plantation Shutters Orlando FL
  • Assess for height and trim on the interior of the
    drywall or trim at the points where the
    plantation Shutters will be attached. It's
    important to check if the drywall or trim extends
    beyond the window aperture. If it does, you may
    prefer to use the smaller of the two dimensions
    to determine where your shutters will be
    installed. When measuring for internal mounting
    shutters, make sure you measure the actual window
    opening and don't cut any corners.

5
External Mounting Plantation Shutters
  • When putting shutters on the exterior of the
    frame, there are a few things to consider first.
    Start by deciding how much of the space you'd
    like the Orlando FL Plantation Shutters to cover
    don't base your decision on the size of the
    window. Also, decide whether you want the shutter
    frame to be on the drywall, on top of the trim,
    or on the outside of the trim. If your cover will
    be installed outside of the trim, be sure you
    factored in the need for the shutter to clear the
    trim..

6
CONTACT
  • Bridge Mill Shutters
  • United States
  • info_at_bridgemillshutters.com
  • https//bridgemillshutters.com

7
(No Transcript)
Write a Comment
User Comments (0)
About PowerShow.com