how to install window ac? - PowerPoint PPT Presentation

About This Presentation
Title:

how to install window ac?

Description:

In this ppt you will get to know many things about How to install window ac? check this blog on our website: – PowerPoint PPT presentation

Number of Views:5
Slides: 8
Provided by: ashwinkotia

less

Transcript and Presenter's Notes

Title: how to install window ac?


1
How to install window ac?
  • Visit our website

2
How to install window ac?
  • How to install window ac? Air conditioner becomes
    a part of our life without ac we can live without
    it. We use it everywhere whether it is our
    office, home or our car.
  • As we all know that is AC is very costly. We buy
    an AC which is suitable for us. Window ac is
    cheaper than split ac but if you damage it while
    installing it, it will be costly than split ac.
    So, proper guidance and instruction are very
    important. We have done lots of research and now
    we are here with our best instructions to install
    a window ac.
  • Installing a window ac is not a big deal. But it
    can be highly risky if you didnt install it
    properly. It can damage your air conditioner, and
    if the damage is big, you have to buy a new AC.
    Its installation is very simple you can install
    it easily you just need only 2 people to install
    it.

3
How to install window ac?
4
The steps to install the window ac
  • unwrap the air conditioner.
  • Unwrap your AC carefully and make sure that you
    dont lose any part of the ac. It can be needed
    in the future.
  • remove the front grille.
  • Open the screws from the ac using a screwdriver
    and place the nut bolts at the safe place and
    make sure you dont lose it. It will be needed at
    the end.
  • separate front grille.
  • Separate the front grille from the ACs body and
    place it in a safe place.

5
The steps to install the window ac
  • Remove ACs body and slide-out chassis of the AC.
  • Remove the slide-out chassis from the ACs body.
    Make sure you dont damage the coil it will be
    expensive if you damage the coil of the slide-out
    chassis
  • And now you have 3 things front grille, ACs
    frame, and the slide-out chassis.
  • measure the ACs frame and cut the area where you
    want to place the air conditioner.
  • Measure the area where you want to place your ac.
    Make sure the fame should be fit in that area. It
    should not be big or small it should be fit.

6
The steps to install the window ac
  • drill the nut bolts.
  • Put your frame where you want to place your AC
    and mark on the holes where you are to drill.
    Make sure to put the frame a little bend from the
    outside. because the water flows continuously
    from the air conditioner and no one wants that
    the wastewater came to our room. Then drill it
    and tighten the nut bolts. Nut bolts should be
    very tight because only those nut bolts hold the
    whole air conditioner.
  • complete the installation.
  • The parts which you have removed earlier now its
    time to put them back. Put the slide-out chassis
    on the ACs frame slowly and carefully. Because
    coils can be damaged. And then put front grille
    and tight the nut bolts. Now connect the wires.
  • And here your installation has completed. Now you
    can use your air conditioner.

7
THANK YOU
Write a Comment
User Comments (0)
About PowerShow.com