CPAP HOSE CONNECTOR

1
CPAP HOSE CONNECTOR
MYPRIMECLEAN
1
2
How to Connect a Oxygen Concentrator to CPAP
Machine
MYPRIMECLEAN
2
3
Steps You need to Take
1. Check Out the CPAP Mask First
2. Connect The Tube To A Mask
MYPRIMECLEAN
3. Attach Oxygen Bleed-In Adapter
4. Connect To CPAP Machine
3
4
Additional Tips For CPAP Hose Connector

• Make sure you have plenty of time when doing
  this. Mask will have to be adjusted several times.

2. Replace the filter of the CPAP machine if
needed.
3. Mask must be snug when on the face but it must
not cause too much pressure. Aim for comfort.
MYPRIMECLEAN
4. You can use a mirror to adjust the mask and
make sure it is fitted properly.
5. Nasal pillows must be replaced every 6 months.
4
5
6. Start the CPAP machine first and then the
oxygen concentrator.
7. When turning the machine off, turn the oxygen
concentrator first and then the CPAP Machine.
8. Some CPAP machines do have a sensor that will
detect leaks in the tubing. You will be notified
once that happens.
9. Do not use vinegar or any alcohol product for
cleaning the mask. They can cause skin
irritations.
MYPRIMECLEAN
10.Nasal dryness may happen at some point. If
you notice this issue, start using a heated
humidifier.
5
6
Cleaning the Hose
All patients need to know that hose in a CPAP
machine system must be cleaned on a regular
basis. Ideally, you will need to clean it once
per day, but cleaning it a few times per week is
possible as well.
MYPRIMECLEAN
6
7
Here you were able to learn all about CPAP hoses,
CPAP Hose Connector, and all the links in
between. Keep in mind that you need a hose that
is compatible with your machine and you need to
clean it on a regular basis.
7
8
Contact Us
support_at_myprimeclean.com
Phone No 8618688995412
Website www.myprimeclean.com
8
9
THANK YOU
9