3W’s of Calibration Describes by Best Calibration Company In UAE - PowerPoint PPT Presentation

About This Presentation
Title:

3W’s of Calibration Describes by Best Calibration Company In UAE

Description:

In simple term, Calibration is a Comparison of The Standard Measurement and your Equipment Measurement. Typically the accuracy of a Standard should be 10 times in comparison to other equipment. But the common ratio which is accepted globally is 3:1. The main two things in the calibration are it checks the Accuracy of the instrument and the Traceability. Falcon Geomatics is an ISO Certified Calibration Company In UAE, we also provides a wide range of Land Survey Measuring Equipment and Accessories and also rent and hire new and used equipment. – PowerPoint PPT presentation

Number of Views:47

less

Transcript and Presenter's Notes

Title: 3W’s of Calibration Describes by Best Calibration Company In UAE


1
3Ws of Calibration Describes by Best Calibration
Company In UAE
2
What is Calibration?
  • In simple term, Calibration is a Comparison of
    The Standard Measurement and your Equipment
    Measurement. Typically the accuracy of a Standard
    should be 10 times in comparison to other
    equipment. But the common ratio which is accepted
    globally is 31. The main two things in the
    calibration are it checks the Accuracy of the
    instrument and the Traceability.
  • Falcon Geomatics is an ISO Certified Calibration
    Company In UAE, we also provides a wide range of
    Land Survey Measuring Equipment and Accessories
    and also rent and hire new and used equipment.

3
Why Calibration is Important?
  • Over time of Use, Measuring Equipment Lose its
    accuracy. If you are using Equipment for a long
    time without calibrating, the result might be
    changed and it causes big issues over time.
  • If you calibrate equipment at some time it helps
    you to maintain the quality of the final product
    and you can easily use it for a long time without
    any problems.
  • Calibration of accessories is also important as
    Equipment, because if we used calibrated
    equipment it occurs the minor measuring error. So
    to get the proper accuracy of the product you
    must have to sure about calibration of equipment
    and accessories as well.

4
When to Calibrate?
  • There are several suggestions of when to
    calibrate equipment some of them are here
  • It is necessary to calibrate the instrument if it
    collides or is damaged anywhere. Because it can
    result in a change in accuracy.
  • When you buy used equipment from someone, you are
    not sure when they would have calibrated the
    equipment. So it needs to be calibrated once
    before using it.

5
  • Most companies offer equipment only after it has
    been calibrated. However, we must check its
    calibration once.
  • It often happens that using a uniform device for
    a long time reduces its accuracy prematurely. So
    that it has to be calibrated.
  • Even if the equipment is left unused for a long
    time, it may lose its accuracy. So it is also
    necessary to calibrate it.

6
Contact us

Find us on
WWW.FALCON-GEOSYSTEMS.COM
7
(No Transcript)
Write a Comment
User Comments (0)
About PowerShow.com