Steps Involved In The Process Of Concrete Resurfacing in Sydney PowerPoint PPT Presentation

presentation player overlay
About This Presentation
Transcript and Presenter's Notes

Title: Steps Involved In The Process Of Concrete Resurfacing in Sydney


1
STEPS INVOLVED IN THE PROCESS OF CONCRETE
RESURFACING IN SYDNEY
2
(No Transcript)
3
A worn walk-away could be a sore in the overall
landscaping or exteriors of the property. The
good news is that if it is made up of concrete,
giving it a new look will be absolutely easy with
the help of concrete resurfacing in Sydney. As
you decide to do this, you fix its destiny that
includes a brand new, durable surface with
uniform color and a wonderful look all over
again. But this would require efforts and thus,
it is always advised to call in concrete
restoration in Sydney experts who will take the
following steps.
4
Step 1 - Clean the Concrete
  • The first step involves cleaning the concrete
    area and for this, experts are involved, but only
    after getting equipped with PPEs like protective
    boots, goggles, helmet and so on.
  • They will actually blast off surface dirt with a
    gas-powered pressure washer that can reach at
    least 3,500 PSI and this is why wearing PPEs is
    mandatory for them.
  • They will also engage in the process of concrete
    washing to set the area free from algae, mildew,
    etc.

5
Step 2 - Patch Spalled Areas
  • While the concrete is damp, the concrete
    restoration Sydney experts will mix the
    resurfacer to fill the divots present there.
  • They will combine 1 part water with 7 parts
    resurfacer in a 5-gallon bucket blend with a
    paddle mixer attached to a corded drill.
  • Then, they will fill the recesser with this
    resurfacer and smooth the area with a finish
    trowel.

6
Step 3 - Spread the Resurfacer
  • The next step of concrete resurfacing Sydney
    involves filling the walkway joints with
    peel-and-stick foam weathers tripping, and
    dampening the concrete.
  • Here, it is important to know that the resurfacer
    will be ready to work in about 30 minutes and
    when ready, it will be enough to cover two
    sidewalk slabs.

7
Step 4 - Trowel It Out
  • They will then, spread the resurfaces and they
    will further make it slip-resistant after waiting
    for 5 minutes.
  • In 5 minutes time, they will sweep a
    nylon-bristle broom across it, 90 degrees to the
    foot traffic.

8
Contact Us
www.cobblecrete.com.au
Address PO Box 1124 Camden 2570 Phone No.
1300 784 002 E-Mail info_at_cobblecrete.com.
au
Write a Comment
User Comments (0)
About PowerShow.com