Eye Bolts Manufacturers

1
Welcome To Rachna Fasteners

• Rachna Fasteners started its operation eight
  years back serving domestic Indian market in
  power and construction sector with increased
  infrastructure and fully equipped testing
  laboratory step was taken for export .
• Since then there has been no looking back. Over
  the years Rachna Fasteners achieved sale figure
  of over 90 export sales in year 2012-13 as
  compare to 24 of export sales in year 2008-09.
  After approval of ISO 9001 2008, certification
  for BSEN 15048 part-I II for CE approved
  fasteners was achieved in year 2010-11.
• Apart from packing heat treatment, special focus
  has been given to material identification
  traceability starting from mill heat number till
  final dispatch.

2
Products
CE Approved Fasteners As Per EN-15048 Part-1 and 2
Hex Head Screws / Bolts
Cup Square Mushroom Head Screws
Crash Barrier Fasteners
Eye Bolts
Other Forged Items
Square Head Bolts BS 7419 Square Bolts
Nuts
Threaded Bars / U-Bolts / L-Bolts
Washers / Sheet Metal Components
3
CE Approved Fasteners As Per EN-15048 Part-1 and 2
CE Approved Fasteners As Per EN-15048 Part-1 and 2
Backed by the profound experience of the industry, we are engaged in manufacturing and exporting a quality range of CE Approved Fasteners. The range offered by us consists of CE Approved Fasteners As Per EN-15048 Part-1 And 2. To manufacture these fasteners, our professionals make use of high quality material procured from the authentic vendors of the market. All these fasteners are made available in various specifications as well as in customized range to match the exact requirements of the patrons. Description of the offered product is mentioned as followsCE APPROVED FASTENERS AS PER EN-15048 PART-1 AND 2We are CE BS EN 15048 approved manufacturers for the supply of fasteners to our worthy clients in Europe and manufacture as per following parameters.Bolts/Screws-Bolts/screws as per ISO 4014 and ISO 4017Nuts-Nuts as per ISO 4032 and ISO 4034Washers-Washers as per ISO 7089 and ISO 7091Surface-HDG, Zinc Plated, Self Black
4
Hex Head Screws / Bolts
Hex Head Screws Bolts
Hex Head Screws Bolts
We are highly competitive in hex type bolts and
set screws, We offer hex head screw up to M24 in
cold forging and up to 52mm in hot forging,We
have various conventional and 4 station bolt
master for this purpose,We offer hex head screws
in grade 4.6,4.8,5.6,5.8,6.8,8.8,10.9Low
carbon medium carbon steel is used till grade
6.8 and high quality Alloy steel is used for 8.8
grades and above, Various Finish offered are self
colour Blackened, BZP, HDG, Dacromet, Geomet and
PTFE coating, Our in-house plating plants ensure
maximum corrosion resistance with no hazardous
material involved, BZP(Cr3 and Cr6) are offered
in high quality Trivalent Finish both in White
and yellow plating.
5
Cup Square Mushroom Head Screws
Cup Squares or carriage bolts are generally
offered to DIN 603 standard, However they are
some times fully threaded as per customer
requirements, Even head diameter and Neck beneath
can be adjusted according to customer
requirements, Cup squares are forged using high
speed national bolt formers to get accurate and
sharp edged neck with proper round head,Cup
squares are offered starting from range M6 to
M24,with grades 4.6, 4.8, 5.6, 5.8, 6.8, 8.8, and
10.9.
6
Crash Barrier Fasteners
Crash Barrier Fasteners
Crash Barrier Fasteners
At Rachna Fasteners we specialize in all types
are crash barrier fasteners for every type of
market, We produce Nib Bolt to DIN 607, Round
Head Oval neck bolt or Thin hex head screws.
These fasteners are generally required Hot dip
galvanized finish and electroplated in some
cases, these fasteners like other our products
are offered in all Mild steel and high tensile
range, All assembled parts are free moving by
hand yet providing best fit for male and female
threading.
7
Eye Bolts
Eye Bolts are manufactured according to DIN
444, DIN 580 and also according to customer
requirements, Different types of Eye Bolts are
Manufactured Starting from M6 TO M64 Eye bolt
are manufactured both in Mild steel and High
Tensile Bolt.
Eye Bolts
Eye Bolts
8
Other Forged Items
There are various our Forged Components Fasteners
that are manufactured on daily basis as per
customer special requirements. These are general
and specific purpose fasteners like T head bolts,
saddle bolts, cap screw bolts, grub screws,
roofing screws. Due to limitation on space,
concentration has been given to very general and
most common fasteners, However we guarantee best
prices and quality on any kind of cold/hot forged
fasteners that you may require.
Other Forged Items
Other Forged Items
9
Square Head Bolts BS 7419 Square Bolts
Square bolts are manufactured to DIN 480 and NFE
27341 (Head oversized)Square square drop down
holding bolts commonly known as square squrae
bolts are manufactured according to BS 7419,
These bolts are start from range M16 and go up
M33, these bolts are manufactured using hot and
cold forging depending up on length and diameter.
10
Nuts
We have a small facility producing nuts, nuts are
produced through cold and hot forging
facility,Nuts are available in grade 4,5,6,8 and
10, Finishes offered are Blackened ,BZP , Hot dip
galvanized, Dacromet , Geomet and PTFE. These
above shown nuts are part of our most produced
items, These are available in thread 6H, over
tapped and 6az. Various Standard followed for
production are DIN, ISO, ASTM, BS, NF.
Nuts
Nuts
11
Threaded Bars / U-Bolts / L-Bolts
Threaded bars are manufactured starting from
Diameter M6 to M100 and their corresponding Inch
sizes, Threaded bars are available up to 6 meter
in length, Grades option for threaded bars is
4.6, 4.8, 5.6, 5.8, 6.8, 8.8, However currently
8.8 threaded bars are available up to 1 meter
length only, Threaded bars are available in BZP
and HDG. Tube packaging also available.
U-Bolts / L-Bolts
12
Washers / Sheet Metal Components
Washers are produced through long range of power
presses available in our own press shop, most
common standard for our washer production are DIN
125 A, NFE Standard, DIN 9021, BS 4320
Champhered washers like DIN 125 B are also
produced in our press shop. Washers manufactured
are of Minimum 100 HV hardness, moreover 140 HV
washers are also manufactured, Heavy Tempered
Washers are readily available in all sizes, Along
with washers all types of sheet metal components
like all types of bushes, fish plates, hangers
and all other components possible through power
and hydraulic presses can be manufactured.
Finishes offered are same as other fasteners Self
colour, Blackened, Hot Dip Galvanized, Geomet,
Dacromet and PTFE.
13
Contact Us
Mobile [phone]
Tel [phone]
Email Id info_at_rachnafasteners.com
Fax [phone]
Works Corporate OfficeRACHNA FASTENERSNo.
671, Industrial Area - BLudhiana - 141003Punjab
( INDIA )
Website http//www.rachnafasteners.com