Advantages Of Epoxy Floor Ohio Coating - PowerPoint PPT Presentation

About This Presentation
Title:

Advantages Of Epoxy Floor Ohio Coating

Description:

Epoxy floors Ohio are commonly used in industrial and commercial flooring. Epoxy Floor Ohio is normally applied on top of concrete creating a high-performance, durable and smooth surface that can withstand heavy loads and last for many years – PowerPoint PPT presentation

Number of Views:39
Slides: 17
Provided by: LatishaRita

less

Transcript and Presenter's Notes

Title: Advantages Of Epoxy Floor Ohio Coating


1
Advantages Of Epoxy Floor Ohio Coating
2
(No Transcript)
3
Epoxy floors Ohio are commonly used in industrial
and commercial flooring. Epoxy Floor Ohio is
normally applied on top of concrete creating a
high-performance, durable and smooth surface that
can withstand heavy loads and last for many
years. Many industrial facilities, warehouses, as
well as commercial buildings, depend on epoxy
floors Ohio because they are easy to clean and
are safe for workers, inventory and equipment.
4
(No Transcript)
5
(No Transcript)
6
Before you apply the coating, make sure that
the concrete surface is clean and semi-porous. It
cannot bond on a covered or concrete which is
polished. You must make sure that the concrete is
fully cured and make sure that you search and
repair holes which are on the concrete surface.
Also, you have to remove any available grease and
oil.
7
(No Transcript)
8
(No Transcript)
9
In case that the concrete is old, conduct
testing on the concrete surface to identify any
previous layer covering the concrete surface.
You can do this by pouring water on the floor. If
the floor does not absorb that water, then it is
likely that the concrete is sealed and that means
it is not suitable for epoxy floor Ohio
coating. Also, you have to make sure that the
room temperature as recommended by the
manufacturer. The unfavorable temperature will
make the coating to bubble and peel. Epoxy is a
mixture of liquid and other chemicals and after
the mixture, your time is limited, so you have to
apply it quickly before it becomes stiff and hard.
10
(No Transcript)
11
(No Transcript)
12
It depends on the type of product that you are
using you might have to use an epoxy primer and
finisher coat. You will add the primer just like
normal paint, and you have to allow it to dry for
several hours before applying the epoxy. In order
to apply the primer, you have to cover the floor
with a thin layer of water and then spread the
primer evenly using a roller pin on a pole evenly
on an entire floor. Apply the finisher using the
same formula.
13
(No Transcript)
14
(No Transcript)
15
(No Transcript)
16
For more update , visit us
https//www.commercialpaintingservices.com
Write a Comment
User Comments (0)
About PowerShow.com