Why Do You Need Pre Terminated Fiber Solutions? - PowerPoint PPT Presentation

View by Category
About This Presentation
Title:

Why Do You Need Pre Terminated Fiber Solutions?

Description:

Save yourself and your team lot of time and trouble, and eliminate all performance worries with Pre Terminated Fiber Cable from FalconTech. Below you will find information on standard options and components available for Pre Terminated Fiber Optic Cable assemblies. – PowerPoint PPT presentation

Number of Views:20

less

Write a Comment
User Comments (0)
Transcript and Presenter's Notes

Title: Why Do You Need Pre Terminated Fiber Solutions?


1
Why Do You Need Pre Terminated Fiber Solutions?
2
INTRODUCTION
Todays modern data center proposition continues
to promote the hot topics around consolidation,
reduced operating expense, flexibility,
scalability and of course being as Green as
possible along the way. When you are building
a custom fiber network it is essential to
purchase quality cable assemblies. Never waste
time or money terminating fiber cable in the
field again. Save yourself and your team lot of
time and trouble, and eliminate all performance
worries with Pre Terminated Fiber Cable from
FalconTech. Youll get top-quality fiber cable
thats built to your exact specs, fully tested,
and shipped ready for installation so you can
take care of business. Below you will find
information on standard options and components
available for Pre Terminated Fiber Optic Cable
assemblies.
3
PRE TERMINATED FIBER OPTIC CABLE
A Pre Terminated Fiber optic cabling system is
one that contains cables and the necessary
modular components with the accompanying
connectors already attached. For optimum quality
assurance, each part of the system is tested
before it is shipped to the customer. A pre
terminated fiber optic cabling system may contain
any of the following, depending on the customers
needs
  • Comes with a Swivel Pulling Eye
  • A swivel pulling eye is attached to protect
    against stresses associated with pulling the
    fiber optic assembly into position during
    installation. The pulling eye acts as a strain
    relief by distributing the stress over the outer
    jacket and eliminating it from the fiber optic
    strands.

Continue....
4
  • Comes on a Triple Flange Spool
  • Long preterminated fiber optic assemblies are
    shipped on a triple flange spool to provide
    protection for the connectors on both ends. The
    additional flange also allows the end of the
    assembly to remain safely coiled and protected
    from bending, twisting and tangling while the
    cable is run out. The inner end can then be
    unwound and connected.

PRE TERMINATED FIBER OPTIC CABLE
  • Direct Burial
  • Direct-Buried Cable (DBC) is designed to be
    buried under the ground without any additional
    covering, conduit or sheathing to protect it.
    This Outside Plant (OSP) fiber optic cable
    includes water-blocking characteristics and an
    armored jacket to prevent damage from rodents and
    the pressure created by the surrounding dirt and
    rock.
  • Interlocking Armor
  • Fiber optic distribution cable encased in
    interlocking aluminum armor is ideally suited for
    harsh environments such as direct buried outside
    plant applications, industrial and heavy traffic
    areas, and data centers where cables are
    installed under the floor.

Continue....
5
  • Indoor/Outdoor
  • Indoor/Outdoor cable (I/O cable) is designed to
    withstand the environmental conditions
    experienced outdoors. Dry water-blocking
    features, such as water-swellable Aramid, protect
    against water ingress.

PRE TERMINATED FIBER OPTIC CABLE
  • Aerial Cable
  • Aerial rated cable is strong enough to withstand
    the tension between structures through the
    incorporation of a strengthening feature such as
    a messenger cable or a central strength member.
  • Tini Armor Uni-Boot
  • This cable option features fiber optic cable
    encased in a small OD stainless steel miniature
    armor. The 3mm outside diameter is more than 65
    smaller and 75 lighter than standard
    interlocking armor and still maintains
    flexibility. The coiled armor offers protection
    and durability and may eliminate the need for
    conduit.
  • Plenum / PVC
  • The plenum options include OFNP (Optical Fiber
    Nonconductive Plenum) and OFCP both of which have
    the fire-resistant and low smoke producing
    characteristics needed to meet The NEC
    requirements for cabling installed in a plenum
    space and not residing in conduit.

6
AVAILABLE CABLE TYPES
PRE TERMINATED FIBER OPTIC CABLE
Now you can install your own fiber optic cables
without investing in training and equipment.
Custom Factory terminated, pre-tested and ready
to pull. Made to lengths of up to 5000 feet.
These assemblies can be ordered in either indoor
or outdoor variations, and in 6, 12 or 24 strand
fiber counts, in Multimode OM1, OM2, OS2, OM3
and OM4 or Singlemode!
  • OM1 -- Falcon Technologies preterminated
    multimode OM1 fiber optic distribution assemblies
    utilize 62.5 micron Corning glass in a tight
    buffer design. These trunk cables provide a high
    speed infrastructure backbone pathway available
    in indoor/outdoor plenum (OFNP) and riser (OFNR)
    armored and non-armored.

Continue....
7
AVAILABLE CABLE TYPES
  • OM3/OM4 -- Falcon Technologies preterminated
    multimode OM3 and OM4 fiber optic distribution
    assemblies utilize 50 micron Corning glass in a
    tight buffer design. These 10 Gigabit, laser
    optimzed trunk cables provide a high speed
    infrastructure backbone pathway available in
    indoor/outdoor plenum (OFNP) and riser (OFNR)
    armored and non-armored.
  • OS2 -- Falcon Technologies preterminated
    singlemode OS2 fiber optic distribution
    assemblies utilize 8.3 micron (sometimes seen as
    9 micron in the nomenclature) Corning glass in a
    tight buffer design. These trunk cables provide a
    high speed infrastructure backbone in a long
    distance pathway available in indoor/outdoor
    plenum (OFNP) and riser (OFNR) armored and
    non-armored.

8
FEATURES AND BENEFITS
AVAILABLE CABLE TYPES
  • Lower Total Cost Forget about costly
    connectors, consumables, and gear, plug the work,
    time, and testing required for field fiber optic
    link end. Our Pre Terminated fiber optic links
    spare where it matters most. FalconTech fiber
    links make end basic.
  • Proven Performance Get top execution with no
    field end errors. All Black Box pre-ended fiber
    links experience broad investigation and testing
    and accompany a lifetime ensure. Rely upon
    FalconTech for the majority of your fiber link
    needs.
  • Quick Turnaround Most FalconTech pre-ended
    fiber links are turned around in under seven
    daysnow and then even in a day. Never be
    helpless before trusting that links will show up
    again.

9
AVAILABLE CABLE TYPES
  • Faster Deployments Cut installation time and
    labor costs by 70 to 80 with pre-terminated
    fiber cable. Because it arrives ready for work,
    deployments are as easy as plug-n-play. Fiber
    optic termination made easy.
  • Fiber Cables Your Way Just specify the core,
    cable type, jacket, connector, strand count,
    breakout, labeling, staggering, and if you want a
    pulling eye. With FalconTech, your fiber cable
    solutions feel custom made for you and your team.

10
CONCLUSION
AVAILABLE CABLE TYPES
Our fiber optic cables are made by FOA Certified
technicians in the USA by Falcon Technologies
Inc. using the latest epoxy injection and
polishing systems for the highest quality and
performance. The end faces of the Corning glass
within our assemblies are machine polished,
resulting in a much lower light loss than can be
achieved by hand polishing. All pre terminated
fiber products are guaranteed and 100 tested.
11
CONTACT US
AVAILABLE CABLE TYPES
  • Next Day Service Available
  • Falcon Made Assemblies In Usa
  • Call 866-958-4499 For Immediate Service

Request A Quote
FIND US
About PowerShow.com