Chest of Drawers in 3ds Max

1
Welcome to LiveTrainingLab
2
Welcome to online 3ds max course by
livetraininglab

• If you want to learn more about 3ds max you can
  visit out website at https//livetraininglab.pk/co
  urses/3ds-max-training/

3
Today we will learn

• Chest of drawers in 3ds max

4
Chest Drawer

• We are going to create a drawer. We are going, to
  begin with, a simple box here go to geometry and
  click and drag I want to change the color maybe
  blue and we want to see the edges around the
  corner we go here to select edges to edit faces
  and faces oka. We are going to right-click
  editable poly we want to make those faces or
  polygons of the other box we are created
  separately. So we select each one go down here
  and detached those are similar so we dont want
  to see we want to detach them together they touch
  this one and detach the bottom.

5
Polygon

•  Alright, now we are going to work on the front
  polygon first what. We are going to do is select
  an edge then go-to the ring. Theyll dont
  connect basically this disconnect operation will
  connect the two segments that we have selected
  now segments here. We are going determine how
  many segments we are going have and pitch
  determines how far the two segments are a slide
  allow us to slide the two edges together now I
  want to segments and we want no slide and we want
  to pitch those two segments away maybe 90 is okay
  97 selected okay do the process again ring
  connect go onto one segment pitch no slide okay
  we do it again hold ctrl and click to the left
  the two edges together not ring connect two
  segments no slide and fitch about maybe.

6
Shell modifier

• I know I noticed that the draw is a little bit
  smaller. We want to select all our shape and
  resize. Now we want to give our polygons or our
  faces the faces of the box some thickness how we
  gonna do that. We are going to the modify panel
  the list and go down to select shell modifier
  here you. Here you want to the thickness to be in
  a word we are gonna maybe try three centimeters
  its okay throughout the outré amount. We are
  gonna copy this modifier and paste it in this
  segment in this polygon.

7
Front Surface

• Get the same here paste now what we are gonna do
  is were gonna lift this upper polygon that it is
  not interacting with a fee or other polygons we
  do the same for this. We want to give thickness
  to this front shape front surface in front of the
  thrower paste the same thing. I think we should
  do something first we should detach those two
  polygons right here detach. We can do our shell
  modifier paste and drag to the outer side. We can
  apply the shell modifier to those two also we can
  add some outer amount so those two pieces are
  more appealing and they are appearing much better
  maybe 1.5 its gonna be okay.

8
Nurbs subdivision

• So you notice that this upper face of the drawer
  is a little bit smaller. Were gonna scale it a
  little bit we dont have to be perfect. We have
  to be very precise because we are learning here
  the basics and we dont have to be perfect. If
  you have noticed that we are gonna convert to
  editable poly or just wanna click here and on the
  shell modifier and click collapse and you cannot
  refer to it appalling again so we can cover it
  editable poly directly now. We want to smooth
  things a little bit and we do that by coming down
  to subdivision surface use NURBS subdivision
  norms subdivision its ugly actually so we need
  to use some support edges and how we are gonna do
  that it is quite simple. Here we select those
  edges and do the ring give it some space push it
  to the sides.

9
Shortcut Alt r2

• I am using the shortcut alt r2 to create this
  ring effect same thing come down here do it again
  or you can use the ring and reduce the pitch
  amount to maybe 45 or 46 and its okay now notice
  the difference go down subdivision surface use
  nearest subdivision. You can see that its better
  its a lot better than it was before we are gonna
  do the same process for every piece in this
  drawer now cover the dipawali . Hold ctrl to
  select somebody mostly two edges. You do the
  pitch amount maybe 50. Create some supporting
  edge right here connect maybe 96 maybe 93 thats
  okay. Its good to train ourselves to do the
  supporting process for the shape. 

10
FOLLOW US ON
SOCIAL MEDIA
https//www.facebook.com/LiveTrainingLab.pk
https//www.twitter.com/LiveTrainingLa1
11
Contact us

• If you have any query about 3ds max feel free to
  contact us at www.levtraininglab.pk
• Phone No Pakistan (0323 6567207)
• Phone no USA (16163285881)