Know In Detail How Exactly The Chip Tuning Works?

1
Know In Detail How Exactly The Chip Tuning Works?

• When it comes to tuning a car we usually come
  across some words like re-chipping, remapping or
  chip tuning. All these terms merely belong to
  engine tuning that is done electronically rather
  mechanically. The chip here refers to an
  electronic storage device which is present on the
  circuit board inside the engine control unit.
  The chip in ECU consists of values in the binary
  form which can only be understood by ECUs main
  processor and it further uses these values to
  control the engine.
• Each and value has its own and separate position
  and when the car is re-chipped, the values are
  altered at the group of addresses that controls
  fuelling, ignition timing and on turbo engines,
  turbo boost. These are known as maps and often
  used term for this process is remapping.
• The idea of chip tuning initially sound a bit
  good but is it possible to add horsepower without
  ever adding physical modifications? Yes, it is.
  These are the steps that make all this possible
• Ignition timing The efficiency of the engine is
  obviously a priority for manufacturers and so is
  reliability. Try advancing the timing as the
  increases the probability of generating knocks.
  It is necessary to properly address the knock
  because it can easily ruin an engine. The
  manufacturers or the automobile makers will
  consistently try keeping the ignition timing
  within the safe range. But, by tuning the timing
  you can unlock a lot of untapped potentials.
• Air/fuel ratio The gasoline entirely composed of
  octane has air/fuel ratio of 14.71. This ratio
  is by mass and it means for every gram of fuel
  your engine burns it will require 14.7 grams of
  air. It is thus believed that maximum power is
  generated at an air-fuel ratio of 12.51, while
  maximum thermal efficiency is achieved at the
  air-fuel ratio of 161. The manufacturers want
  to generate more horsepower so that the engine
  becomes fun responsive for the driver and
  theyll also need to make sure that the vehicles
  engine is efficient and it meets government
  emission regulations.
• Governors The control of many of the things is
  directly in the hands of the manufacturers and
  they attempt to electronically limit your run.
  The revolutions per minute i.e. RPM cut- offs
  will occur in safe boundaries and the highest
  speed is governed digitally quite often. In
  order to raise the engines spark or fuel cut-off
  or top speed, look for the simple aftermarket
  plug and play solutions.
• Launch control Tuning always does not mean to
  add power. There are far many other features
  that can also be considered like launch control
  and flat foot shifting which can further be
  added to the plug and play devices. And the
  aftermarket launch control systems will hold the
  engines revolutions per minute at a selected
  speed while the vehicle is stationary. Once the
  clutch is dumped, the revolutions per minute are
  not at all limited by the launch control.
• More boost A tuned engines give a power boost to
  the vehicles overall performance. A boost to
  your vehicle definitely makes you smile and
  adding a boost is one of the simplest

2

• ways of adding power to the forced induction
  engine. With the increase in boost, you can
  increase the amount of air packed into the
  cylinder. Whatever it is remapping, rolling road
  tuning or adding a boost to the vehicle, all of
  them result in increasing and improving the
  overall performance of your vehicles engine.
• Things to consider There are numerous things for
  a vehicles maintenance and tuning that are to
  be considered and there are many companies that
  provide off the shelf tuning maps to a number of
  varieties of cars. These maps are often
  beneficial in providing core performance
  benefits, remembering that the longevity of your
  engine has been reduced. Get your car tuned
  professionally by the reputable company so as to
  expect its better working and performance and
  also ensure that the boundaries and the limits
  are safe. A lot of automobile manufacturers
  claim that every engine they put out is similar
  to each other, but in reality, thats of course
  not the case and therefore, it is beneficial to
  tune to your specific engine separately.