Tennis Court Resurfacing and Construction

1
Tennis Court Resurfacing and Construction
2
Synopsis

1. Quality Tennis Court Construction
2. Want To Add A Backyard Tennis Court?
3. Your Tennis Court Surface Options
4. Common Resurfacing Problems Faced With Indoor
   Tennis Courts
5. Asphalt-Based Emulsions Vs Acrylic Resurfacers

3
Quality Tennis Court Construction

• Generally, a tennis court must meet three
  standards
• Great aesthetics and ambiance
• High potential for performance
• Minimal cost of repair and maintenance
• The Post Tension concrete is the tennis court
  that meets all three standards. Contrary to
  asphalt, concrete has a lower susceptibility to
  different climates. More so, the surface of the
  concrete is durable and long-lasting.
  Additionally, Post Tension concrete is suitable
  for the renovation of existing tennis court or
  the construction of new courts. Here are a few
  more reasons to consider the Post Tension
  concrete for the next court remodeling.
• Elimination of potential liability to cracks
• Attractive and sturdy edges
• Great resistance to heaving or settling
• Ability to span unstable soil
• Elimination of cold joints around posts such as a
  fence or net posts
• Controlled lope for draining
• Ability to remodel on a pre-existing tennis court
  without excavation

4
Want To Add A Backyard Tennis Court?

• Do You Have Space For Your Backyard Tennis Court?
• For doubles play, the recommended size for play
  is 60 by 120 feet. So, the first thing to do is
  to measure and check theres enough space for the
  court.
• Drainage is Key
• Drainage is vital so water can drain off the
  court with ease. The surface should be
  considerably leveled, albeit preferably higher or
  maintaining the same level as the surrounding
  land.
• Finishing
• Fencing Size Aesthetics Matters
• A 10-feet fence is recommended for hard-courts.
  While 8-feet is recommended for fast-dry, clay
  and turf courts because these surfaces create
  reduced bounced ball situations. When it comes to
  choice of materials for fencing, there are
  varieties to choose from fabric mesh to chain
  link, the choice depends on financing and
  aesthetics.
• Shade Shelters
• Having a nice shade to relax before, during or
  after a game is important. Custom shade shelters
  designed to sites specifications can be
  purchased online and installed upon delivery.

5
Your Tennis Court Surface Options

• Natural Grass Courts
• Natural turfs are the softest surfaces to ever
  play on. These surfaces influence the speed of
  the player and the ball.
• Synthetic Grass Courts
• Artificial turf is excellent for individuals that
  desire the same excitement natural grass surface
  offers without the rigors of maintenance and
  irritation that comes with natural grass courts.
• Acrylic Courts
• Acrylic courts are made from special materials.
  These courts have an acrylic surface with an
  underlying asphalt or concrete base. This court
  is also a preferred choice among many players
  because it absorbs little energy and encourages
  medium to fast play. Not only are these courts
  available in different colors, they are durable
  and can be customized. In addition to acrylic
  courts unique feature is the ease by which they
  can be managed.
• Clay Courts
• Clay court lovers can enjoy games over natural or
  synthetic clay surfaces. Either way, both
  surfaces offer feelings of excitement to play
  upon. It requires a daily routine to keep clay
  courts in excellent condition.
• Synthetic Clay Courts
• Synthetic clay turf provides the same feeling
  natural clay offers while taking away the hassles
  of daily maintenance. This court has permanent
  lines over its surface so theres no need for any
  form of repainting or other tedious maintenance
  routines.

6
Common Resurfacing Problems Faced With Indoor
Tennis Courts

• Resurfacing the indoor tennis court present
  unique challenges that are not faced with outdoor
  tennis courts. Indoor tennis courts are not
  susceptible to harsh weather conditions like
  outdoor courts but some factors can cause wear
  and tear to indoor tennis court surfaces.
• Acrylic court surfaces dry off by evaporation,
  and since these surfaces are oil-based, drying it
  can present a challenge. When water which is
  essential for heavy coating application over this
  surface is not properly drained, it collects
  itself in the airspace over the court and slows
  down the surface drying process. The aftermath of
  this scenario is the formation of "marbled" spots
  on the court that ultimately results in light and
  dark sections.
• Cooler external temperature and poor ventilation
  can muddle things up by inducing condensation to
  "rain" down onto the courts. Discoloration tends
  to occur when moisture drips onto the courts
  curved surface, this occurs when the internal
  temperature is warmer while the ceiling of the
  interiors is cooled by colder external
  temperature. To help avoid such a case, it is
  crucial to ensure that air conditioning or
  heating systems are turned on to suck out
  humidity from the circulating air. All available
  vents, windows, and doors should be opened so
  moisture can find its way out of the arena.
  Industrial fans can also be installed to boost
  air circulation and push moisture trapped in exit
  doors.

7
Asphalt-Based Emulsions Vs Acrylic Resurfacers

• Each gallon of Acrylic Resurfacer can suspend
  only 15 to 16 lbs of sand. The major purpose of a
  resurfacer is to fill up holes in pavements and
  to enhance fine coating on existing smooth
  surfaces. Altogether, resurfacing impacts on the
  overall consistency of the playing surface and
  prolongs the lifespan of the colored surfaces.
• Every gallon of Asphalt Emulsions can suspend
  only 5 to 6 lbs of sand. Simply put, it takes
  three gallons of AE to provide the same filling
  capacity one gallon of AR gives.
• AE comprises molecules that soak up moist which
  can weaken some sections of the coated layers. It
  can also cause bulging. During cold weather
  conditions, this can cause de-lamination of
  surfaces and early failure. If AE is applied over
  a polished acrylic surface, the asphalt layers
  have increased the propensity to absorb lots of
  moisture that moves through coatings at a slower
  pace.
• It is advised to roll over asphalt emulsions
  after application to obtain a fine coating.
• With Acrylic Resurfacers, rolling over is not
  necessary.
• Both Resurfacers need a minimum asphalt curing
  period of two weeks (under premium restoration
  conditions), before application. While this is
  so, 30 days is advised to ensure optimum effect,
  especially in climatic conditions when curing
  isnt ideal.
• AE needs 24 hours to cure prior to the
  application of acrylic colors coating.
• AR can be applied with acrylic colors even when
  dry.
• Asphalt Emulsions are susceptible to temperature
  changes as they become mushy under intense heat.
  During hot days, these can create bulges. AE
  surfaces can also crack during cold weather
  conditions, whereas AR remains intact regardless
  of weather conditions.

8

• For more details, please visit
• http//crowall.ca/

1.416.951.4626 daniel_at_crowall.ca 2 Briardale
Place, Aurora, Ontario.