The Right Way Of Using Alcohol Test Strips

1
The Right Way Of Using Alcohol Test Strips
2

• A simple way to determine if someone has been
• abusing alcohol, one can use a urine alcohol test
• strip. This alcohol test strip is designed to
  check for
• the presence of alcohol in the urine higher than
• 0.04. Ethyl alcohol is the type of alcohol that
  is
• detected during the conduction of this alcohol
  test.
• This test is a rapid method of detection
  however,
• the tests can be later confirmed in a laboratory
• using a technique like Gas Chromatography-Mass
• Spectrometry (GC/MS).

3

• This test is a simple to test, that can be
  conducted
• anytime, anywhere. The procedure is simple to
• carry out.

4
The procedure to use an alcohol test strip

• Once you are ready to perform the test, take
  the piece out of the foil pouch. Do not break the
  seal of this pouch if you are going to carry out
  the analysis at a later point.
• The person whose being tested should collect
  his urine sample in a plastic cup.
• On the alcohol test strip, you will be able to
  see a line that is the MAX line. Now, carefully
  dip the strip into the urine sample, making sure
  that it does not exceed the indicated line on the
  strip.

5

• Let the strip remain dipped for about 15
  seconds, and then, take it out of the container,
  and put it on a flat surface. Now you have to
  wait for the lines on the test strip to appear.
• If the strip develops negative results, they
  can be read immediately, and you do not have to
  wait. But, for the positive results to develop,
  one will have to wait for at least 5 minutes
  before reading and analyzing the results.
• Do not wait longer than 10 minutes to review
  the results. Otherwise, a false reading may
  appear.
• Interpretation Of The Results On Alcohol Test
• Strips.

6
Here are the steps to follow to read the results
on the test strips

• When the line starts to appear on the test
  strip after the test has been conducted, just
  under the test handle, you will be able to see a
  red or a pink line which is The Control Line .
  The other line that might or might not appear is
  the Test Line (T).

7

• The Control Line appears on the test strip to
  confirm that the test has been conducted
  properly.
• If, however, the test line doesnt appear, it
  means that the test has not been conducted
  properly and you might have to repeat the test.
• Now, after waiting for 5 minutes, if a faint
  red or pink line appears on the test strip, it
  means the test result is negative. But, if no
  other line shows up on the alcohol test strip, it
  says that the candidate has been tested positive.
• These are the simple steps to carry out the
  alcohol
• strip test.

8
WEBSITE

• https//12panelnow.com/
• info_at_12panelnow.com