Make Your Furnace Run More Efficiently

1
Make Your Furnace Run More Efficiently
2
Synopsis

1. Furnace Cleaning and Some Tips for Repairs
2. Furnace Repair to Help Make It Work Perfectly
3. Identify the Root Cause to Handle Furnace Repair
   Effectively
4. Tips to Remember When Dealing with Furnace
   Cleaning
5. A Common Plumbing and Heating Issue with Solution
6. Fix Plumbing and Heating Issues to Sell Your Home
   for Profit
7. Plumbing and Heating Issues How to Deal with
   Common Plumbing Issues
8. Plumbing and Heating Fixing Air Conditioner
   That Would Not Dehumidify Air

3
Furnace Cleaning and Some Tips for Repairs

• To ensure that your furnace does not stop working
  when you need it the most, you should spend some
  time doing some maintenance and repair. In most
  cases, you need to check the air filter and
  ensure that it is in good condition. Understand
  that directly air filters can cause all sorts of
  problems. Therefore, it is important to clean it
  once a month even if you do not perform thorough
  furnace cleaning.
• In addition to checking the filter, you should
  also check the thermostat often. If your
  thermostat stops working fine, your furnace will
  no longer produce sufficient heat. In many cases,
  you only need to fix the battery to make your
  thermostat run again. There may be an issue with
  thermostat setting if your furnace cycles too
  often. So, be sure to check it before going for
  any costly repairs.
• When proceeding with furnace cleaning, you should
  consider check all the components for
  performance. For instance, you should pay a close
  attention to the power supply and circuit
  breaker. Your furnace will stop working and you
  will get a blank screen when the circuit breaker
  has tripped. The same may happen when you blow a
  fuse.
• Check all components and ensure that nothing is
  clogged. There may be dirt and debris causing
  blockage. If there are clogged components, you
  will experience pilot light and ignition control
  problems. It is a good idea to let a professional
  take care of issues related to faulty electrical
  components or clogged components. Nevertheless,
  you can handle the basic cleaning on your own.

4
Furnace Repair to Help Make It Work Perfectly

• Dirty filters can cause several problems, but you
  can learn to replace the filter on your own. Keep
  in mind that clogged air filters can reduce the
  efficiency of your furnace because they reduce
  airflow. Ignoring a clogged filter can sometimes
  damage the limit switch. Therefore, it is
  important to check the filter often and have it
  replaced if you cannot clean it properly.
• Check and prevent minor wear and tear problems to
  avoid dealing with more complicated problems
  later. Keep in mind that normal wear and tear can
  cause heat control-related issues, airflow
  problems, and overheating. Therefore, you should
  ensure that everything is working fine, and if
  you are not sure about how to deal with wear and
  tear, simply ask a furnace repair technician for
  help.
• Check and correct any faulty ignition because
  things can go so wrong so quickly. You will not
  be able to heat your home if you have a faulty
  ignition. You have to pay special attention to
  thermocouple problems here because they can leave
  you with an unlit pilot light. Similarly, clogs
  or drafts in the appliance can also cause
  ignition problems. You should check these areas
  to get a clue and fix the issue to make your
  furnace functional again.

5
Furnace Repair to Help Make It Work Perfectly

• You should check the thermostat for setting and
  performance. Ensure that it is working fine or
  else you will have to deal with problems with the
  fan. Incorrect settings can also make it
  difficult to heat your home.
• You should ensure that the limit switch is
  working fine. You usually have a problem with the
  limit switch when you experience any blower
  issues. You need to check it especially if the
  blower runs continuously. If you notice a problem
  here, it is a good idea to avoid fixing it
  yourself because there is a risk of making it
  worse. It is better to let a professional do it
  for you.
• You should call in a professional if your furnace
  is a little too noisy. You may be experiencing a
  mechanical problem if your furnace is squeaking
  or rumbling. As mentioned already, it is better
  to get in touch with a pro to fix mechanical
  issues, so be careful when dealing with such
  issues.

6
Identify the Root Cause to Handle Furnace Repair
Effectively

• Ensure that the furnace is receiving power. In
  case of no power supply, the unit is not going to
  work, no matter what. If there seems to be a
  problem with power, you may want to check the
  unit for tripped circuit breakers or blown fuses.
  You need to check it at the main entrance panel.
  Keep in mind that some furnaces may have fuses
  mounted on or in the furnace.
• Consider resetting the furnace before going any
  further with furnace repair. You may find the
  button near the motor housing. Reset it and wait
  for about half an hour. When the motor has cooled
  completely, simply press the button and wait for
  the furnace to start. If nothing happens, repeat
  the same process and wait for another 30 minutes.
  
• Carefully check the thermostat before performing
  any repair work on your furnace. The furnace is
  not going to function properly if the thermostat
  is not set properly. You may consider raising the
  setting by 5 degrees to see if it resolves the
  issue or not.
• Ensure that the gas supply is not blocked. In
  case your furnace uses oil, you need to ensure
  that an adequate amount of oil is reaching the
  furnace.

7
Tips to Remember When Dealing with Furnace
Cleaning

• Be sure to start with the filter. If the filter
  is not clean, it is going to put serious strain
  on your furnace. Not only does it increase your
  heating costs, but it also significantly lowers
  the life of your furnace. During furnace
  cleaning, you need to check the filter carefully
  and ensure that there is a cover over the slot.
  The cover ensures an efficient return-air system.
  Do not ignore the cover because it raises safety
  concerns as well. If you are using pleated
  filters, know that they usually last no longer
  than three months. You can wash permanent filters
  once a month and use them again.
• Be very careful about relighting. You need to
  check the pilot light is functioning properly.
  When relighting, you should pay attention to all
  the instructions mentioned on access doors. It is
  not always easy to relight the pilot light
  because something else might not be right. If
  that is the case, you should call in a qualified
  heating contractor for furnace cleaning.
• Use a vacuum cleaner to clean the inside of the
  furnace. You should check the blower first and
  then use the vacuum to remove any debris or dust
  inside or around your furnace.

8
Tips to Remember When Dealing with Furnace
Cleaning

• You should ensure that the blower motor is
  functioning properly. To keep it working fine,
  you may consider lubricating it often.
• You should ensure that the burner is in good
  condition. Check it for corrosion and have it
  cleaned often. You can gain access to the burner
  by removing the flame shield first. While
  checking flames, you should do it with the fan on
  and off to ensure that everything is in good
  condition.
• Pay attention to the flue as well. You should
  check it for any dents or gaps. It is also
  important to ensure that it is venting
  efficiently to the outdoors.

9
A Common Plumbing and Heating Issue with Solution

• Many people complain about their cooling unit not
  working efficiently. If it is not cooling
  properly and has long compressor cycle, it might
  be due to a worn-out compressor. You need to
  consider for how long you have been using your
  heating and cooling unit. In case it has been
  very old and has a long "on" cycle of the
  compressor, you should think of having its
  compressor changed. Old compressors sometimes
  become weak and fail to compress refrigerant
  properly.
• In case you are dealing with a short-cycling
  compressor, you may have to look for answers in
  different places. Sometimes, a compress may turn
  off and on quite frequently. If this is the case
  with your compressor, it could be due to an
  obstructed thermostat. Moreover, the same issue
  could be the result of iced coils, a leaking
  refrigerant, or an oversized cooling system. To
  fix the issue, you will have to pinpoint the
  issue first. First, go check the thermostat.
  Ensure that there is no obstruction in the
  thermostat. Now, have a look at the condenser
  fins you will find the part in the outside
  condensing unit. Ensure that the fins are
  completely clean they should not be excessive
  bent either. If the fins are bent, you can use a
  fin comb to correct them.
• Sometimes, the air filter is the root cause of
  trouble. A dirty air filter will fail to function
  properly and directly affect the performance of
  your heating and cooling unit. Simply replacing
  the filter may save you from calling in a
  plumbing or heating company for assistance.
  Refrigerant leaks and incorrect refrigerant
  charge can also affect the performance of the
  unit, but you should ask a technician to confirm
  this for you.

10
Fix Plumbing and Heating Issues to Sell Your Home
for Profit

• You should check the water heater and ensure
  there are no issues with the unit. You should pay
  special attention to the relief valve because it
  is more likely to develop problems. Even if it is
  dripping a little, it will never leave a good
  impression on your buyer. You should also ensure
  that it is plumbed as per code. There are copper
  water-reflex on the upper side of your heater and
  they are also prone to leaks. Be sure to check it
  as well.
• Check all the faucets in your home for small
  drips. Small drips at hose connection and faucets
  are common. You may also notice small drips under
  the sink. Be sure to check all these areas for
  possible drips and have them fixed before making
  your property available to your potential buyers.
  
• Be sure to check your toilet and ensure that
  everything is working fine there. Ensure that
  there are no drips and it flushes well with one
  flush. Any problem here can affect the final
  offer you get from your potential buyers. It is a
  good idea to let a plumbing and heating
  specialist to check your toilet for potential
  problems. They can identify it and fix it quite
  efficiently too.

11
Plumbing and Heating Issues How to Deal with
Common Plumbing Issues

• It is common to deal with dripping faucets from
  time to time. The problem is that most people do
  not take it as a big issue and often ignore it
  until the faucet refuses to function completely.
  You have to understand that not getting your
  dripping faucets repaired in a timely manner
  could hurt your energy bills and damage the
  faucet permanently. Therefore, do not ignore
  those leaky faucets and be sure to fix them as
  soon as possible.
• You may have to deal with leaky pipes often. Many
  people complain about dealing with leaky pipes
  during the winter months. In most cases, you
  notice leaks close to the joints. The good thing
  is that you can avoid those leaky pipes
  completely through proper maintenance. You should
  check those joints periodically and fix minor
  issues as soon as you notice them. Never ignore
  even the smallest drops on the floor, especially
  when they are near the joints. Leaving those
  leaky pipes unattended can lead to serious leaks
  that can lead to water damage, which can cost you
  a lot of money. If you notice drops of water on
  the floor but fail to pinpoint the problem area,
  you should call a plumbing and heating specialist
  for assistance.
• Running toilets can also test your nerves
  sometimes. The problem is that many people do not
  pay attention to the proper maintenance of their
  toilets. It could lead to running toilets that
  can waste a significant amount of water. In fact,
  statistics show that running toilets can waste
  more than 200 gallons a day. You should not be
  the guilty of committing this serious mistake and
  ensure that you get your running toilet fixed as
  soon as possible.

12
Plumbing and Heating Issues How to Deal with
Common Plumbing Issues

• Low water pressure is another common plumbing
  issue that may push you to hire a plumbing and
  heating specialist. The issue is more common in
  older homes, but anyone can have this issue due
  to a number of reasons. In most cases, only a
  true expert can help determine the underlying
  cause of low water pressure.
• You may have to deal with a leaking hose bibb,
  especially during the summer. Those hibbs are
  usually protected, but a long, cold winter can
  leave cracks in them. Those cracks can lead to
  leakage. If you do not want to deal with this
  problem often, you may benefit a lot from going
  for a frost-proof hose bibb.

13
Plumbing and Heating Fixing Air Conditioner
That Would Not Dehumidify Air

• If your heating and cooling unit is not
  dehumidifying air, it could simply be the result
  of too much humidity in your home. It could be
  the result of your evaporator coil failing to
  condensate drainage properly. Open windows and
  water leaks during humid periods could also be
  the reason why there is too much humidity in your
  home.
• If you know nothing about your cooling unit, you
  will be better off hiring a plumbing and heating
  expert. Thanks to their knowledge, skills, and
  training, they will always be in a better
  position to identify the underlying issue and
  then fix it efficiently. They will ensure that
  you do not have to deal with the same issue
  again, which is one big reason why many people go
  straight to a plumbing and heating company for
  assistance.
• In case your cooling unit is not dehumidifying,
  you may consider closing all your windows. Check
  them all and ensure that you have not left one
  open by mistake. By keeping your windows closed,
  you can ensure that humid air stays out of your
  home. Next up check your condensate drainage. You
  need to ensure that it is working properly or
  else your cooling unit is not going to function
  properly. Along with checking these things, you
  may also consider installing a portable
  dehumidifier in your home.

14
The End

• For more details, please visit
• http//smile-hvac.ca/services/furnace-cleaning-reg
  ina/