How to repair a garage door - PowerPoint PPT Presentation

Loading...

PPT – How to repair a garage door PowerPoint presentation | free to download - id: 89428d-M2EzY



Loading


The Adobe Flash plugin is needed to view this content

Get the plugin now

View by Category
About This Presentation
Title:

How to repair a garage door

Description:

There are two main components to a garage door: the door itself and the opener.Overhead garage doors, whether they roll up in sections or swing up in one piece, operate on spring tension. The door moves on metal tracks on the garage walls, and a heavy spring or springs provide the power.Check the metal tracks inside the garage. Look at the mounting brackets that hold the tracks to the walls. If they're loose, tighten the bolts or screws at the brackets. – PowerPoint PPT presentation

Number of Views:6

less

Write a Comment
User Comments (0)
Transcript and Presenter's Notes

Title: How to repair a garage door


1
How to Repair a Garage Door
2
  • There are two main components to a garage door
    the door itself and the opener.

3
  • Overhead garage doors, whether they roll up in
    sections or swing up in one piece, operate on
    spring tension. The door moves on metal tracks on
    the garage walls, and a heavy spring or springs
    provide the power.

4
  • Check the metal tracks inside the garage. Look at
    the mounting brackets that hold the tracks to the
    walls. If they're loose, tighten the bolts or
    screws at the brackets.

5
  • Working inside the garage with the Garage door
    closed, examine the tracks for dents, crimps, or
    flat spots. If there are any damaged spots, pound
    them out with a rubber mallet, or with a hammer
    and a block of scrap wood.

6
  • Check the tracks with a level to make sure
    they're properly aligned. Horizontal tracks
    should slant slightly down toward the back of the
    garage with roll-up Garage door , the vertical
    sections of track should be exactly plumb.

7
  • Clean the tracks with concentrated household
    cleaner to remove dirt and hardened grease. Clean
    the rollers thoroughly, and wipe both tracks and
    rollers dry.

8
  • Check for loose hardware, and tighten as needed.
    On swing-up Garage door , check the plates where
    the spring is mounted to be sure the screws are
    tight, and tighten any loose screws. 

9
  • Sagging at one side of the Garage door can often
    be corrected by servicing the hinges. If a screw
    hole is enlarged, replace the screw with a longer
    one of the same diameter, and use a hollow fiber
    plug, dipped in carpenters' glue, with the new
    screw.

10
Garage door repair
  • ADVANCED EXPRESS TECHNICAL SERVICE LLC
  • P.O.BOX 127804, DUBAI, U.A.E
  • Telephone971-4 2554590
  • Telephone971-50-1725959
  • FAX971-4 2554890
  • E-mail info_at_aetsllc.com
  • E-mail aets_uae_at_ymail.com
  • websitewww.aetsllc.com
About PowerShow.com