Sequential controller Used in Dust Collector System manufactured by Maniks

1
Sequential Controller For Dust Collector System

• -by Maniks

2
Maniks Sequential Controller

• Introduction
• Maniks Sequential Controller
• What is Maniks Sequential Controller
• How it Works?
• Benefits of Sequential Controller
• Why Maniks Sequential Controller?
• Applications
• Specifications of Maniks Sequential Controller

3
Maniks Sequential Controller

• Maniks Sequential Controllers

4
Maniks Sequential Controller

• What is Maniks Sequential Controller?
• Sequential controller is a key element of the
  valves used in the dust collector systems.Maniks
  Provides pilot valve used in dust collector
  system which are operated using sequential
  controller.Light emitting diodes (LEDs) are used
  to provide visual indication of which pilot valve
  is being charged as well as it gives "Power On"
  indication. The series of sequenced steps is
  customizable from 2 through 10.To adjust the
  length of time between valves being de-energized
  (Off time / Pulse Frequency) and the length of
  time that the valve is energized ( On time /
  Pulse Duration) controls are provided. All logic
  functions and timings are controlled by Silicon
  semiconductor components

5
Maniks Sequential Controller

• How it Works?
• The catalog SQP-1 Sequential Controller provides
  timed sequential energization of connected loads.
  When power is applied to the Controller, the
  "Power On" light emitting diode (LED) provides
  visual indication and pilot valve number 1 is
  immediately energized. "Output 1" LED provides
  visual indication of this event.
• The pilot valve will remain energized for the
  length of time as indicated by the setting of the
  "Pulse Duration / on time" control. Note that the
  calibrated dials are for approximate settings
  only and if exact times are required, they must
  be measured.
•  
• .

6
Maniks Sequential Controller

• Pilot valve number 2 will automatically be
  energized at some time interval after pilot valve
  number 1 has been de-energized. This length of
  time will be as indicated by the setting of the
  "Pulse Frequency / off time" control, "Output 2
  LED will provide visual indication that this
  event is occurring. The Controller will continue
  to sequentially energize the pilot valves until
  the power is removed

7
Maniks Sequential Controller

• Benefits of Sequential Controller
• Cost efficient
• High quality performance
• Automatic control
• Consumes low Time and Power
• Ease of installation and maintenance
• Good flow characteristics
• http//www.maniks.com/sequential-controller.html

8
Maniks Sequential Controller

• Why Maniks Sequential Controller?
• A variety of manufacturers make dust
  collector valve, cylinders, and other auto-mation
  components that control the flow of compressed
  air through industrial dust collector systems.
  Performance and cost-effectiveness are essential
  in all such systems.
•  
• The critical difference in MANIKS sequential
  controller other is its unique combination of
  quality, performance, and value with quick
  shipment of standard components as well as
  consistent technical support and service for easy
  assembly, reliable operation, and efficient
  maintenance.

9
Maniks Sequential Controller

• Applications
• If you have take a look we are a leading supplier
  to engineering contractors and to end users of
  sequential controller in a wide range of
  industries since few decades. Our high quality
  dust collectors have wide range of application
  some are listed below
• Lime and cement processing
• Grain, agriculture, and feed
• Metalworking (welding, grinding, cutting ...)
• Food processing
• Heavy industries (iron, steel ...)
• Pharmaceutical (Powder ...)
• Power engineering (coal-fired power plants)
• Wood machining

10
Maniks Sequential Controller

• Specifications of Maniks Sequential
• Supply Voltage Input Fuse
• 230VAC 1.5A
• 24VDC 3A
• 110VAC 3A
• Pulse Frequency / Range Adjustability Standard
  2 to 60 seconds     
• Special Requirements 1) 4 to 120 seconds    
• 2) 6 to 180
  seconds
• Pulse Duration / Range Adjustability 20 to 200
  milliseconds
• Operating Temperature Range 00C to 500C
• Repetitive Accuracy on Time Sequence 5

11
Maniks Sequential Controller

Thank You