Tips for Replacing Car Battery Terminals

1
Tips for Replacing Car Battery Terminals
2
Introduction

• The ends of car battery terminals are designed
  with a very soft and delicate lead.
• Continuous opening and closing of these terminal
  ends can cause these delicate leads to
  deteriorate.
• If you see cracks on the terminals or if you are
  not able to tighten them enough, it an indication
  that its time to replace them.

3
Material Required

• Wrench Set
• Pliers
• Car battery cables
• Battery post cleaning agent
• Rags
• Heavy gloves
• Ratchet Set
• Hacksaw
• New battery cable terminals

4
Steps to Change Car Battery Terminals

• Step 1
• Check the battery terminals and cables
• The first step is to check the condition of the
  battery terminals and cables.
• If the terminals have visible signs of
  corrosion, remove them.
• Then, clean the terminals and the battery post
  with a battery terminal spray cleaner using a
  wire brush.
• Coat terminals with anti-corrosive spray
• If corrosion has completely destroyed the metal,
  then they should be replaced.

5
Thank You!

• Step 2
• Use Good Quality Terminals.
• If corrosion is eating away at the metal of the
  terminals and you are unable to tighten them
  enough around the battery post to prevent the
  movement of the terminals, its important to
  replace them.
• But, dont fall into the trap of auto parts
  vendors that sell cheap and low-quality lead
  battery terminals, they can hamper electrical
  connection.
• Cooper compression terminals made from tinned
  copper surrounds the cable well and cots a few
  more bucks.

• Free Powerpoint Templates
• Visit to www.freepptbackgrounds.net
• Select
• Categories Colors Popular Templates
• Select your liked template designs
• Download free and use it your presentation.
• And Share our website.

6
Thank You!

• Step 3
• Replace the battery terminals
• Cut the battery cable right where it disappears
  inside the terminal.
• Now cut the old end off as close to the ends as
  possible with a knife.
• Now slip the heat-shrink tubing over the cable
  and slide it down.
• Now collecting the main as well as all other
  small cables insert then into the compression nut
  and hold it with a wrench while rotating the
  battery terminal to tighten the connection.

• Free Powerpoint Templates
• Visit to www.freepptbackgrounds.net
• Select
• Categories Colors Popular Templates
• Select your liked template designs
• Download free and use it your presentation.
• And Share our website.

7
Always wear eye connection/glasses when working
on car batteries. You can also take assistance of
the experts of the top Man Truck Parts and Man
Spare Parts dealers, BP Auto Spares India.
8
Thank You!
Head OfficeBP Impex4984-4985 Roshanara
RoadDelhi 110007, INDIAPhone - 91 11
23824308, 91-9971119928info_at_bpimpex.in www.bpaut
osparesindia.com/man-spare-parts