About Chalklogy Pest

1
About Chalkology Pest
2
Adhesive Silkscreen

• The Chalk Transfer is a reusable adhesive
  silkscreen that can be used on chalkboards,
  windows, mirrors, tile, whiteboards, appliances,
  painted furniture and so much more.

3
Soluble Crafting Paste

• Chalkology Paste is a water soluble crafting
  paste that goes on wet, dries hard and washes off
  of nonporous surfaces with water. It is used on
  our Chalk Transfers to give a beautiful, unique
  design each time

4
Smear Or Smudge

• Once it is dry it will not smear or smudge and
  has a durable yet smooth texture/finish. It can
  be layered, glittered (while its wet) and even
  written on (once it is dry).

5
Design From The Backer

• Before peeling the design from the backer for the
  very first time use a blow dryer and warm up the
  Chalk Couture of the transfer. This only needs to
  be done the first use and will help ensure that
  no damage will be caused to the transfer as it is
  peeled away from the backer.

6
Peeling The Transfer Off

• Some Chalk Transfers require you to cut the
  design down into its individual parts. We also
  suggest putting an X on the backer before peeling
  the transfer off. This will help you remember to
  put the transfer on the shiny side when replacing
  it on the backer.

7
Apply The Chalkology Paste

• Peel the backing off the Chalk Transfer and place
  on desired surface. Press and smooth the Chalk
  Transfer. Apply the Chalkology Paste by spreading
  it over the entire design using a Chalk Couture
  Squeegee

8
The Paste To Dry

• A thin, even layer produces the best results.Work
  quickly, you do not want the paste to dry on the
  Chalk Transfer.  If you feel that it is drying
  too quickly you can give it a light misting with
  a spray bottle

9
Peel Transfer Away

• After scraping, peel transfer away from surface
  slowly. If you have an area that didnt apply
  well press that portion of the transfer back
  down, squeegee over the area or dampen your
  finger and rub the area to better spread the
  Chalkology Paste.

10
Clean With Sanitizing Wipes

• To clean, rinse Chalk Transfer with water and
  then wipe both sides clean with sanitizing wipes
  Chalk Couture . this removes any chalk residue
  and helps the adhesive last longer. Lay Chalk
  Transfer flat (sticky side up) to air dry

11
Line Up The Backer

• It is easiest to leave the transfer as is (sticky
  side up) on a flat surface and line up the backer
  to the transfer. Use a clean and dry Chalk
  Couture Squeegee to smooth out the Chalk Transfer
  on the backer.

12
Our Porcelain Steel

• While Chalkology Paste is specially formulated to
  use on our porcelain steel chalkboards, it can be
  used on a large number of surfaces. There are
  also a number of different materials on the
  market being sold and used as chalkboard

13
Get Some Fuzz On The Adhesive

• When applying Chalk Transfers to windows, mirrors
  or glass for the very first use you will need to
  get some fuzz on the adhesive. This can be done
  by sticking it to a dry terrycloth washcloth or
  towel, your shirt or pant leg a couple of times.

14
Thanks for watching This slideFor morevisit
herehttp//www.anyonecanchalk.com