Truss – Transportation and Installation

1
(No Transcript)
2
It is clear that we all understand what a truss
before we look any further and it can be
characterized as a type of structure thats built
to support roofs and bridges. They can be made
from various materials including struts rafters
and posts. These are used on most of the houses
being built today, but for those people who want
to avoid the hassle, they would utilize the
services of a truss transportation company which
may also lend assistance with the installation
process as well. They provide support for the
actual construction until it is ready to be used
whether on a bridge or otherwise.
3
Types of trusses There isnt much variation as it
relates to types. However, there is some amount
of sub-division that may need explaining. So
basically, there are only two types which are the
bridge and the roof truss. The difference lies in
the types of bridge and roof trusses, and thats
where you can see a broader variety. It is made
up of three main parts which are the top chord,
bottom chord, and the webs. All of these are
beams that are situated at the top, bottom and in
the middle respectively. One has the function
maintaining compression, the other is responsible
for tension, and the central beams are for
supporting the middle section of the truss. There
are many areas where you can find a reputable
truss support company that can handle the project
from start to finish.
4
How is it moved? Installation is one thing, but
getting the help of a truss transportation
company is a whole other story. After it has been
made to the specific guidelines of the structure
it is going to support, it can be moved as a
whole depending on the size, or it can be moved
in pieces. In circumstances where the project is
enormous, the truss is generally built in pieces
then placed as one when the installation is being
done. Seeing that these pieces are massive, it
impossible to have them moved without the
assistance of trucks and cranes.
5
How is it installed? It is important that youre
aware of the fact each truss is made to exact
engineering standards. Therefore truss
installation must also be precise to ensure that
they operate in the way they were designed. Truss
installation is also subject to variation based
on the different types that are available. For
some trusses, less than twenty penny nails can
be used while in other cases in that of a bridge,
for example, will require a whole lot more.
Support and maintenance Subsequent to
installation, dates for maintenance must also be
scheduled so that the truss can be checked
regularly in an effort to ensure that it working
like should. This is where a truss support
company will come in handy. In addition, it might
be possible that the same company that you hired
to construct it may also be able to help with
installation and maintenance services.
6
www.northlandcraneservice.com