How to Work With a Plasma Cutter? - PowerPoint PPT Presentation

View by Category
About This Presentation
Title:

How to Work With a Plasma Cutter?

Description:

When you are operating a plasma cutter, you will need to handle it with adequate safety and follow the safety procedure when working with a plasma cutter. Any type of electrical equipment such as acdc welder has got safety clothing and procedures to ensure the safety of the person when working with the equipment. – PowerPoint PPT presentation

Number of Views:26
Slides: 7
Provided by: ahptoolsinc

less

Write a Comment
User Comments (0)
Transcript and Presenter's Notes

Title: How to Work With a Plasma Cutter?


1
How to Work With a Plasma Cutter?
  • http//www.ahpwelds.com

2
  • When you are operating a plasma cutter, you will
    need to handle it with adequate safety and follow
    the safety procedure when working with a plasma
    cutter. Any type of electrical equipment such as
    acdc welder has got safety clothing and
    procedures to ensure the safety of the person
    when working with the equipment. If you are
    someone who is working with a plasma cutter for
    the first time, then you will need to know how to
    operate a plasma cutter safely. This article will
    take a look at how to work with a plasma cutter.

3
  • Some safety rules
  • Wear gloves.
  • Keep your hands and clothing dry.
  • Use metal to metal connections.
  • Do not attach any fallen work-piece to the work
    cable.
  • Make sure the surface is clean.

4
  • Steps to work with a plasma cutter
  • First of all, choose any good brand plasma
    cutter. There are various types of plasma cutters
    that you can choose from easily. Make sure it has
    the required features that you need for your
    work.
  • Take a look at the thickness of the material you
    are going to cut and which what speed you would
    like to cute the metal with.
  • Then you will need to select a working location,
    i.e. where you will work with the plasma cutter.
    Make sure the surface where you are going to cut
    the metal is safe and allows free movement
    easily.

5
  • After that, you will need to plug the unit and
    make sure that it is off.
  • Connect the external air compressor carefully and
    properly to the cutter. And then turn on the air
    flow of the cutter.
  • Then you will need to set the metal onto the
    table. Attach the ground clamp to place where you
    will cut the metal with the cutter.
  • Then you will need to switch on the machine by
    pressing the ON switch.
  • Set the appropriate current
  • Press the trigger on the gun to start the cutter
    to cut the metal. And keep it close to the metal
    while cutting it.
  • After work, switch off the machine and then keep
    away the additional tools.

6
Contact Us
  • Contact Media
  • Name Jean Robinson
  • Company/Organization name AHP Tools Inc
  • Email sales_at_ahpwelds.com
  • Web http//www.ahpwelds.com
  • Phone No 925-391-3599
About PowerShow.com