Title: Fibre Channel Storage Area Networking
1Fibre Channel Storage Area Networking
- Objectives
- Understand the SAN concept
- Fibre Channel Architectural Layers
- Explain Fibre Channel Topologies
- Discuss the benefits, Components and Features of
FC topologies
2FC and SAN Functional Definitions
- Fibre Channel (FC) A data transport standard
which provides for high speed delivery of data in
a flexible network-like architecture with
channel-like speed and reliability - Storage Area Networking (SAN) An arrangement of
storage devices and servers, connected in a loop
or fabric, using the fibre channel protocol
3Storage Area Networking
4(No Transcript)
5SAN vs NAS
6What is Fibre Channel
- Fibre Channel is the key enabling technology
behind SANs - It is a high speed, high bandwidth multi-layered
protocol for moving data across a SAN - It can transport most protocols
- It is designed to overcome the limitations of
existing architectures
7Why Fibre and Not Fiber?
- Originally developed to support Fiber Optic
cabling - Copper support was added
- Used to reduce the association to Fiber Optics
- Name recognition for the Fibre Channel technology
8Fibre Channel Topologies
9Fibre Channel Fabric
10FC Protocol and Layers
11FC-0 Architectural Level
12FC-0 Hardware
- HBA-Host Bus Adapter
- SFP- Small Form Factor Plug
- Physical interface sub-assembly
- Hot swappable
- GBIC Gigabit Interface Connector
- Physical interface sub-assembly
- Hot swappable
- Media Interface Adapter
- DB9 Copper to Optical converter
- Not as Common
13Mixing Media Types
Different media types can be mixed together GBIC
or SFP are used to customize switch ports to a
particular media type.
14Optical Fiber Connectors
SC and LC Connectors
15Optical Fiber Connectors
ST Connectors
16Multimode Fiber
- Shortwave 850nm (Red) laser e.g. a CD-Rom uses
this wavelength - Â typically 50100 micrometers
- 500 meters at 1.0625 Gbit/s using 50 micron
- Use SC and LC connectors
17Single Mode Fiber
- Long wave laser 1300n (Infra red)
- 9 Micron wide Lens like fiber
- 10km depending on laser and fiber
- SC and ST connectors
18Fiber Optics Components
19FC Media Safety and Handling
- While current fiber optics ports use low power
lasers - Do not look into the port or cable ends.
- Hold it up to something that will catch the light
as a quick check for a signal or use a cable
tester - Fiber optic cable is fairly robust, however
- The cable is not designed to be load bearing
- Tight bends cause signal loss and can physically
damage the cable - End connections are very fragile
- Link and cable connectors are susceptible to dust
and dirt
20Architectural Levels FC-1
N O D E Upper layer Protocols SCSI, IP FC Mapping to ULP Common Node Services
P O R T Exchanges, Sequences and Framing Encoding and Decoding Media, Cables and Connectors
Upper layer Protocols
FC-4
FC-3
FC-2
FC-1
FC-0
21FC-1 Encoding and Decoding
- Each 8 Bit byte is encoded into 10 bits called
transmission characters - 10 bit allows for
- Excellent parity checking
- Balanced transmissions equal numbers of 0s and
1s - This increases speed and life of components by
providing for an optimal duty cycle - This encoded bit stream also allows for the
detection of the boundaries of the data bits - Not a Secure encryption
- Transparent
- You will never see it happen unless you use an
analyzer - If it isnt working right you will be replacing a
component or FRU (Field Replaceable Unit)
22Architectural Levels FC-2
N O D E Upper layer Protocols SCSI, IP FC Mapping to ULP Common Node Services
P O R T Exchanges, Sequences and Framing Encoding and Decoding Media, Cables and Connectors
Upper layer Protocols
FC-4
FC-3
FC-2
FC-1
FC-0
23FC-2 Framing Protocol
- Frame is the smallest unit of information
- Frames have headers, data and trailers
- Sequence is a number of frames
- Exchange is a number of sequences
Exchange
Sequence
Sequence
Sequence
Frame
Frame
Frame
Frame
Frame
Frame
24Frame Protocol Structure
25FC-2 Classes of Service
- Different data types have different delivery
requirements - Different classes of service address the
differing delivery requirements
26FC-2 Classes of Service
- Class 1 Acknowledged Connection Service
- Class 1 connection based, a virtual Pipe, 100
bandwidth. - Class 2 - Acknowledged Connectionless Service
- Class 2 connectionless, but frames are
acknowledged. - Class 3 - Unacknowledged Connectionless Service
- Class 3 Connectionless, unacknowledged Ship and
pray - Class 4 Fractional bandwidth Connection
Oriented Service. - Class 4 connection based, a virtual circuits
- Class 5 Isochronous Service (Proposed)
- Class 6 Simplex Connection Service
- Class 6 multicast, video broadcast applications
27Architectural Levels FC-3
N O D E Upper layer Protocols SCSI, IP FC Mapping to ULP Common Node Services
P O R T Exchanges, Sequences and Framing Encoding and Decoding Media, Cables and Connectors
Upper layer Protocols
FC-4
FC-3
FC-2
FC-1
FC-0
28Architectural Levels FC-4
N O D E Upper layer Protocols SCSI, IP FC Mapping to ULP Common Node Services
P O R T Exchanges, Sequences and Framing Encoding and Decoding Media, Cables and Connectors
Upper layer Protocols
FC-4
FC-3
FC-2
FC-1
FC-0
29FC-4 Mapping to ULP
- Define how each ULP will map to FC
- Separate one for each ULP
- SCSI-3 FCP (Fibre Channel Protocol)
- FC-4 ensures that products from different vendors
are inter-operable (Use the standard)
30Architectural Levels ULP
N O D E Upper layer Protocols SCSI, IP FC Mapping to ULP Common Node Services
P O R T Exchanges, Sequences and Framing Encoding and Decoding Media, Cables and Connectors
Upper layer Protocols
FC-4
FC-3
FC-2
FC-1
FC-0
31Support Channels Networks
Channels
Networks
32Upper Level Protocols
33SAN Building Blocks
- In Fibre Channel terminology, a communicating
device is a node, this can be a workstation,
server, disk array, tape drive, etc. - Nodes are interconnected using three topologies
- Point-to-point
- Arbitrated loop
- Fabric
34Fibre Channel Node
Node
Port
35Point to Point
Node
N Port
N Port
36World-Wide Name (WWNN)
- Also known as Node-Name
- Protocol independent
- 64-Bit Identifier
- Implemented in much the same way as the IEEE
48-bit MAC address
37Fibre Channel Arbitrated Loop (FC-AL)
NL_ports are N_ports with added loop functions,
they re-transmit packets not addressed to them